• Resources Recycling
• /
• v.12 no.1
• /
• pp.18-24
• /
• 2003

Reusing of electroless Ni-Cu-B waste solution was investigated in the plating time, plating rate, solution composition and deposit. Plating time of nickel-catalytic surface took longer than that of zincated-catalytic surface. Initial solution with 40% waste solution additive at batch type was possible to reusing of waste solution. Plating time of initial solution at continuous type took longer 6 times over than that of batch type. Plating time of 40% waste solution additive at continuous type took longer 2 times over than that of batch type. Component change of nickel-copper for electroless deposition was greatly affected by deposited inferiority and larger decreased plating rate.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.3
• /
• pp.23-28
• /
• 2001

There has been several meaning full efforts to save costs on system development and expand the life-time of a system in changeful IT circumstance. It was a module-based architecture that empower productivity at structured programming era. But it couldn't grow nor evolve, but could raise only calling frequency of module. But OOP or OO-method overcome limit of structured programing by class inheritance and/or overloading and/or over-riding. A component centric architecture, what is mixture of distributed systems, like CORBA or DCOM with OOP, can support not only high reusability or expansion of life-time but also Plug-&-Play between them. To assemble these component to build a new system in easy way, the well-formed specification of a component is highly required. At this study, the enhanced referential component architecture and its UML specification will be suggested.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.231-232
• /
• 2019

IoT 산업이 발전하면서, 인간 생활의 3대 요소 중 주거환경 개선을 위한 많은 종류의 스마트 가전제품이 출시되었다. 그 중 스마트 냉장고는 소비자에게 많은 편리함을 제공한다. 하지만 기존에 출시되어져 있는 스마트 냉장고는 아직 스마트폰과 연동되어 다양한 제어를 하는 것이 개발 초기단계에 그쳐있다. 또한 비용적인 부분에서도 소비자가 부담을 느끼게 되므로 이미 출시는 되어있지만 소비자가 사용하기에 대중화되어 있지 않다. 그리고 사용자가 수동적인 제어가 상당부분 필요함으로 판단하여 일반 냉장고와 다를 것이 없다고 판단하였다. 또한 사용자가 장을 볼 때, 이미 구비되어 있는 물품인데도 불구하고 그것을 인식하지 못하여 같은 종류의 식품을 중복되어 구매하는 것이 다반사이다. 또한 음식의 유통기한도 기록하지 않아서 유통기한이 지난 음식을 섭취하고 식중독에 걸리는 일이 종종 발생한다. 이러한 식자재 관리에 대한 피해를 예방하기 위한 연구 과정에서 현대인이 대부분 스마트폰을 사용하고 있다는 사실을 고려하여 터치스크린을 통해 냉장고 안의 식자재를 관리함과 동시에 저장 및 기록할 수 있는 프로그램을 개발하고 추가로 스마트폰에도 동일한 어플리케이션을 개발하여 동시 제어가 가능하도록 설계하였다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.103-114
• /
• 2008

Single Sign-On is an authentication scheme that enables a user to authenticate once and then to access to the resources of multiple software systems without re-authentication. As web services are being integrated into a single groupware, more web sites are adopting for user convenience. However, these Single Sign-On services are very dependent upon the cookies and thus, simple eavesdropping enables attackers to hiject the user's session. Even worse, the attacker who hijacked one session can move to another site through the Single Sign-On. In this paper, we show the vulnerabilities of the top ranked sites regarding this point of view and also propose a way to protect a user's session.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.555-556
• /
• 2021

In this paper, we propose a malware family classification scheme using malware visualization and transfer learning. The malware can be easily reused or modified. However, traditional malware detection techniques are vulnerable to detecting variants of malware. Malware belonging to the same class are converted into images that are similar to each other. Therefore, the proposed method can classify malware with a deep learning model that has been verified in the field of image classification. As a result of an experiment using the VGG-16 model on the Malimg dataset, the classification accuracy was over 98%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.75-81
• /
• 2014

The integral image is the sum of input image pixel values. It is mainly used to speed up processing of a box filter operation, such as Haar-like features. However, large memory for integral image data can be an obstacle on an embedded hardware environment with limited memory resources. Therefore, an efficient method to store the integral image is necessary. In this paper, we propose a memory size reduction hardware design for integral image. The hardware design is used two methods. It is the new integral image memory and modulo calculation for reducing integral image data. The new integral image memory has additional calculation overhead, but it is not obstacle in hardware environment that parallel processing is possible. In the Xilinx Virtex5-LX330T targeted experimental result, integral image memory can be reduced by 50% on a $640{\times}480$ 8-bit gray-scale input image.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.4
• /
• pp.51-55
• /
• 1986

The general bag for powder materials such as sugar, salt and detergent used at present is a simple rectangular bag. In the practical uses, it has a lot of faults: it is difficult to reseal after partial usages, occurrence of loss in the case of sharing or adding, difficult for measured uses. Author made a new type of the measuring bag for powder materials in order to improve the problems. The new type of the bag for powder materials consists of a body, fall-induced tube with length scale line, and a pin to open and reseal. It shows various effectiveness: measured use$({\pm}0.6g)$ of powder materials, eatings don't occur during long period after opening, and no skin contamination during use of detergent. Consequently, the new one Is suitable for the measured use of powder materials such as sugar, salt, detergent, MSG and so on.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.4
• /
• pp.1-10
• /
• 2015

Recently, calligraphy has become popular because people focused on emotion. The strokes, dots, swoops, cracks and shading are the calligraphy factors for expressing various emotions such as joy, anger, sorrow, and delight. However, the emotion which is expressed by cracks and shading can be destroyed in the digital work when the calligraphy is used for a variety sizes of prints. Professionals work with high-resolution images which are obtained through the scanner, however normal users should work with low-resolution images taken with the smart phone for calligraphy image editing. We propose a raster image scaling method focused on calligraphy that maintains the emotion with cracks and shading, when normal users use the low-resolution calligraphy images in the digital work. The method recolors aliasing boundary of enlarged rasterized image. When recolored by our method, our method decreases aliasing by using the image gradient method, vivify calligraphy images, and maintains the emotion in cracks and shading by using the alpha value.

• Clean Technology
• /
• v.26 no.3
• /
• pp.177-185
• /
• 2020

All coal ash, generated from coal-fired power plants, is entirely dumped onto a landfill site. As coal ash contains 80% fly ash, a clean floating process was developed in this study to recover useful components from coal ash and to use them as high value-added industrial materials. When the unburned carbon (UC) was recovered from the fly ash, soybean oil, an eco-friendly vegetable oil, was used as collector instead of a non-ionic kerosene collector to prevent the occurrence of odor from the kerosene. After the UC was separated by flotation, particulate ceramic microsphere (CM) was recovered, without generating acidic wastewater, through hydro-cyclone instead of sulfuric acid solution in order to separate ceramic microsphere (CM) and cleaned ash (CA) from the residue. By utilizing soybean oil as a collector, the recovery rate of UC turned high at 85.8% due to the increased adsorption of UC, the high viscosity of soybean oil, and the increase in floating properties caused by the linoleic acid contained in soybean oil. All of the combustible components contained in the recovered UC were carbon components, with the carbon content registering high when soybean oil was used. The recovered UC had many pores with a rough surface; thus, it could be easily ground and then used as an industrial material for its fine particles. The CM and CA recovered by the clean separation process using hydro-cyclone had a spherical shape, and the particles were clearly separated without clumping together. The average diameter (D₅₀) of the particles was 5 ㎛, so it was possible to realize the atomization of CM through a process change.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.5
• /
• pp.449-461
• /
• 2024

The use of tunnel boring machine (TBM), a mechanized excavation method with low noise and vibration and high safety compared to NATM method, has increased globally. In particular, slurry shield TBMs are used in subsea and submarine sections because they have an advantage in high pressure compared to EPB (earth pressure balanced) methods. As such, the used water of slurry shield TBMs is discharged through wastewater treatment facilities. In the case of large-scale TBMs, the amount of water used is enormous, so it should be recycled to reduce costs and protect the environment. Various types of additives are used to improve the performance of the slurry treatment plant (STP) and filter press. Among them, coagulants improve the productivity of the filter press by neutralizing the charges on particles. In this study, lab tests were conducted to evaluate the reusability of the used water through the filter press after flocculants were added.