• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.137-137
• /
• 2013

지속 가능한 발전을 위해, 한정된 자원인 석유의 고갈을 막기 위해 석유를 수송에너지로 주로 사용하는 자동차에서 바이오 디젤이나 연료전지, 전기자동차 등 다양한 대안이 제시되고 있다. 그러나 식량 가격 상승, 낮은 안정성, 인프라 확충 등의 문제의 해결이 필요할 뿐만 아니라, 석유의 소비를 감소시키는 대신, 지구에서 소비할 수 있는 다른 형태의 에너지를 소모한다는 측면에서 근본적인 에너지 문제의 해결책의 모색이 필요하다. 19세기 후반, 백열전구의 필라멘트 용도로 사용되기 시작한 탄소 섬유는, 철에 비해 5배 가볍고 강도는 10배가 높으며 내열성이 뛰어난 소재로서, 복합소재의 형태로 제조되어 비행기, 우주선, 풍력 발전 블레이드 등 다양한 산업 분야에서 소재의 장점을 발휘하는 재료로 적용 분야가 확대되고 있다. 특히 비행기 분야에서는 최근 비행기 몸체 구조에 기존 알루미늄 합금을 탄소섬유복합재가 대체하고 있으며, 최근에는 부피 기준 50% 가량까지 탄소섬유 복합재를 사용하여 비행기를 제작하고 있다. 이에 따라 기존에 비해 20% 가량 연료 소모가 감소하여, 비행기 한 대 당 연간 2,700톤의 이산화탄소 배출을 저감하고 있다. 이와 같이 탄소섬유 복합재를 다양한 분야에 적용함으로써, 에너지 문제에 대한 보다 근본적인 접근이 가능하다. 그러나 탄소섬유 복합소재는 금속 등 기존 재료에 비해 높은 가격으로 상용 자동차 등 에너지 소비량이 많은 분야에 널리 적용되는데 한계가 존재한다. 이와 같이 높은 탄소섬유의 가격은, 원가의 50% 가량을 차지하는 PAN 원사 가격과 나머지 반절에 해당하는 안정화/탄화 공정 비용에서 기인하는 것으로, 미국의 ORNL (Oak Ridge National Laboratory), 한국의 KIST 복합소재연구소 등에서는 원사, 안정화 공정, 탄화 공정 등 다양한 측면에서 탄소섬유 복합재의 가격을 절감할 수 있는 방안을 연구 중이다. 미국 ORNL에서는 마이크로웨이브 플라즈마를 이용하여 기존에 열을 이용해 수행하던 탄화 공정 비용을 크게 절감하고 있으며, KIST에서는 대기압 플라즈마를 이용하여 기존에 열을 이용해 2시간 가량이 소요되는 안정화 공정을, 대기압 플라즈마를 이용하여 30분여로 단축된 시간에 수행하는 공정을 개발 중이다. 본 발표에서는 탄소섬유 복합재의 개요와, 탄소섬유 가격 절감 방안으로서의 플라즈마에 대해 논의하며 대기압 플라즈마의 다양한 응용에 대해 소개할 예정이다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.173-186
• /
• 2000

Real-time embedded systems should accommodate many kinds of hardware platforms and resource management policies that vary depending on their operating environments and purposes. It is not an easy job to adapt a multitasking kernel to new system services and hardware platforms, as the kernel must strictly satisfy constraints on its size and performance. This paper describes the design and implementation of an object-oriented multitasking framework that can be reused for implementing microprocessor-based real-time embedded multitasking kernels, In this kernel framework, those parts that can vary depending on hardware platforms and system resource management policies are separated into the hot spots and encapsulated by abstract classes. Our framework thus can be effectively used to implement microprocessor-based real-time embedded kernels that demand high portability and adaptability.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.573-580
• /
• 2002

Reusing IPs requires interface protocol related tasks such as writing test benches and designing interface protocol conversion circuits, e.g. wrappers for IPs. The results of those tasks usually include IPC(interface protocol component)s for the corresponding IPs, similar to bus protocol components of the bus functional models. This paper proposes a methodology for the interface circuit design using synthesizable In that can be re-used. IPC recognizes or executes transactions over the given interface ports. So we present a transaction-oriented interface protocol description language, and a method to convert the description into an IPC in synthesizable VHDL code. With experiments, we show that the interface design using IPC does not cause significant area overhead compared with the interface design without IPC. The proposed IPC-based approach can be employed to reduce the interface design time since the designers can reuse IPCs without understanding the detailed interface protocols.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.205-216
• /
• 2021

There is a growing interest and need for adaptive reuse and remodeling as a method for sustainable urban regeneration and residential improvement. The purpose of this study was to suggest implications for the remodeling of detached house for adaptive reuse in Korea. To this end, a theoretical review and case analysis was conducted on the remodeling in 'Gupo-Saetulmaul' and 'Haeridan-gil' in Busan City. The implications through the study are as follows. (1) Programs for residents participation and sustainable management of buildings are needed. (2) Coexist between residential and commercial use is needed. (3) A guideline for planning and designing street and building remodeling is needed at the level of the entire detached housing site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1844-1866
• /
• 2011

In a home network system, each customer electronic device has the control data format chosen by its manufacturing company and there are various types of digital devices and protocols. Besides the mutual operating environments among the various devices are dissimilar. Affected by the characteristics explained above, home network systems can hardly support the crucial functions, such as data compatibility, concurrency control, and dynamic plug-in. Thus, the home network system shows relatively poor reusability. In this paper, we suggest design technique of configurable framework, which can widely support the variability, to increase the reusability of the home network system. We extract the different parts of the home network system as variation points, and define them as the variability types. We design a structure of configurable framework, and suggest customization technique of configurable framework through selection technique and plug-in technique. Also, we prove the reusability by applying the proposed framework and it methods to real-world home network systems and analyzing the measurement results of these case studies using software metrics. We can expect the proposed approach provides better reusability than the existing them by analyzing those measurement results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.182-188
• /
• 2008

The compounds of recycled polyethylene(PE) and fly-ashes were prepared. Polymers used were sorted PE from mixed plastics of household waste and Low Density Polyethylene(LDPE) and Linear Low Density Polyethylene(LLDPE) recycled from the scrap of packaging film plants. Fly-ashes were from the power plant and from the household waste incinerator. The tensile strength of recycled LDPE and LLDPE compounds decreased and the flexural modulus increased with greater amount of the power plant fly-ash. Anthracite fly-ash gave rise to slightly higher tensile and flexural strength of the LLDPE mixtures than bituminous coal fly-ash presumably due to higher content of unburned carbon. The incinerator fly-ash introduced to household waste PE enhanced both tensile strength and flexural modulus of the compounds. When LDPE and household waste PE were used together, the synergistic effect of incinerator fly-ash to household waste PE was offset by reduced crystallization of LDPE due to the filler particle. The compounds of household waste PE and incinerator fly-ash might be applied to structural materials for such as sewage pipe, which reduces the waste treatment cost and conserve the environment and resources.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.85-91
• /
• 2013

This paper proposes the data reusable search scan methods for full search and fast search to implement low power Motion Estimation (ME). The proposed Optimized Sub-region Partitioning (OSP) method which divide search region into several sub-region can reduce the number of the required Reconfigurable Register Array (RRA) by half compared to the existing smart snake scan method for the same data reusability. In addition, the proposed Center Biased Search Scan method (CBSS) for various fast search algorithms can improve the data reusability. The performance comparisons show that the proposed search scan methods can reduce the average redundant data loading about 26.9% and 16.1% compared with the existing rater scan and snake scan methods, respectively. Due to the reduction of memory accesses, the proposed search scan methods are quite suitable for low power and high performance ME implementation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.13-13
• /
• 1999

본 논문에서는 해석영역의 형상변화, 즉 로켓노즐 내열재의 삭마로 인해 야기된 경계 면의 이동을 고려하면서 2차원 비정상 비등방성 재료의 열전달 문제를 해석할 수 있는 수치해석에 대해 기술하였다. 수치해석 알고리즘은 유한요소법이며 열해석시 경계면 이동으로 인한 격자계의 절점 좌표점이 계산과정 동안에 이동하는 변형 가능한 유한요소격자(transformable finite-element grid)를 사용하였다. 본 수치해석기법의 타당성 입증을 위해 극심한 열하중이 부여된 조건하에서 엄밀해가 존재하는 비정상 축대칭문제 및 고체로켓 노즐내열재에 대해 열해석을 수행하였으며, 그 결과 수치해는 엄밀해 또는 실험치와 잘 일치함을 보이었다. 여러 가지 복합재로 구성된 내삽노즐 또는 외삽노즐에 대해서도 안정된 수치해를 얻을 수 있었다. 아울러 노즐목삽입재로 탄소-탄소 복합재를 적용한 고체추진기관 내삽노즐을 해석모델로 택하여 열전달 해석을 수행하고 해석결과를 분석하였다. 노즐의 표면산화반응에 대한 열반응상수, 즉 Arrhenius 형태로 표시된 식에서 pre-exponential factor 및 activation energy 변화가 탄소-탄소 복합재 및 탄소-페놀릭 복합재의 삭마량에 미치는 영향에 대해서 고찰하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.5
• /
• pp.11-18
• /
• 2009

When underground pipe is installed, backfill materials need proper compaction. But in case of circular underground pipe, compaction of backfill material is difficult and compaction efficiency is poor at beloe the pipe. It caused the stability of underground pipe is reduced and various damages occurred. One of the solutions to solve this problem for underground pipe is to use controlled low strength material (CLSM). CLSM is made by concept of low strength concrete, which is applied to geotechnical engineering field. The representative characteristics of CLSM are self-leveling, self-compacting and flowability. In addition, its strength can be controlled and its construction method is simple. The behavior of underground pipe was investigated by finite element analysis for various backfill materials under same condition. As a result, in case of using the CLSM as backfill material, surface settlement and displacement of pipe are reduced comparing with those in case of using field soil or sand.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.1-8
• /
• 2006

The physical, mechanical and chemical properties of old and new Korean red pine (Pinus densiflora) were analyzed. The old woods were from dismantled timbers of Bonjungsa temple. The crystallized resin in the latewood was observed by microscopic analysis. Also, reduction of specific gravity, occurrence of microscopic cleavage of tracheid was observed in the old wood. The angle of microscopic cleavage of tracheid is estimated with the same angle of micro-fibril angle of 52 layer. The bending, compression and shear strength of old world were decreased about 35-27% than those of new wood. Dynamic modulus of elasticity measured by ultrasonic nondestructive test has the tendency of reducing by the time elapse of the wood usage. Therefore, deterioration of wood could be measured by reduction of specific gravity and dynamic MOE. The static MOE and mechanical properties of old wood could be predictable by measuring dynamic MOE in the longitudinal direction. Extractives of the old wood in 1-% NaOH solution are larger quantity than new wood. Therefore the decay of the wood could be evaluated by analyzing the chemical compound, especially 1-% NaOH solution. The results of this research could be used for understanding and prediction of the changing properties with elapsing time of wood.