• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.179-188
• /
• 2007

Recently, the concern on the receipt of poor ready-mixed concrete in the construction field and the durability of concrete has been increased. Based on the such background, a large number of measuring methods of water content for fresh concrete have been developed and enforced in a developed country. In this study, to investigate practicality for quality control of ready-mixed concrete among various water content measurement techniques, microwave range method, air meter method and capacitance measurement method as measuring methods of water content were selected. Then, it was evaluated estimating performance of water content according to the change of binder types, fine aggregate types, absorption ratio, water content and water-binder ratio in series I and II. Also, it was examined influence on error occurrence of water content according to change of properties of used materials in series III. Finally, based on this study, it was proposed fundamental data to utilize measurement technique of water content to quality control of ready-mixed concrete in construction field.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.4 s.22
• /
• pp.85-93
• /
• 2002

Since the National Geographic Information System(NGIS) project of 1995, the geographic information projects have been promoted in various areas such as central and local governments. In the fact that large scale budget has been invested to geographic information projects as a national policy, the cost-benefit analysis would be essential to enhance the efficiency of the resource allocation. In this circumstance, this study analyzes the costs and benefits of geographic information produced by NGI(National Geography Institute). As a result of the cost-benefit analysis, the total amount of benefits were estimated approximately 620 million dollars and the accumulated ratio of the cost to benefit was 1 to 4.4. Also, the internal ratio of the benefit was 38%, which justified the large scale investment. In case of adding qualitative benefits which can not be measured in a quantitative term, the overall benefits from using such geographic information would be much higher than quantitative benefits. Further research work is required for more objective verification of the large scale national project such as building nationwide geographic information.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.787-796
• /
• 2012

This study, as a purpose of viewshed anaiysis is selected for the view route, View of the target yunseondo wonlim (scenic sites No.34) located in the terrain ridge. Using GIS Viewshed analysis carried out and the results reflect the view route was selected. The basic research for this study, the scenic sites such as the natural and cultural resources for the efficient and optimized to create the route view. Viewshed Analysis results could be summarized as follows: Along a scenic sites located inside the main ridge Viewshed analysis was carried out. This overlapping the cumulative results are Leading to Nakseojae(樂書齎) Seyeonjeong(洗然亭) from space in the visible frequency higher natural villages of the district. Selected the view route and were on the road and in the topographic map nesting along Visible high-frequency region. Based on the results of the nested Viewshed major selected six points Viewshed analysis was carried out. Resource for the surrounding landscape. Results determine whether the visibility of the surrounding landscape was identified as the viewable area appears good. Finally Viewshed Analysis results for six points in the final review.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.242-249
• /
• 2018

This study was conducted to develop an SNP set that can be useful for marker-assisted breeding (MAB) in watermelon (Citrullus. lanatus L) using Genotyping-by-sequencing (GBS) analysis of 20 commercial elite watermelon inbreds. The result of GBS showed that 77% of approximately 1.1 billion raw reads were mapped on the watermelon genome with an average mapping region of about 4,000 Kb, which indicated genome coverage of 2.3%. After the filtering process, a total of 2,670 SNPs with an average depth of 31.57 and the PIC (Polymorphic Information Content) value of 0.1~0.38 for 20 elite inbreds were obtained. Among those SNPs, 55 SNPs (5 SNPs per chromosome that are equally distributed on each chromosome) were selected. For the understanding genetic relationship of 20 elite inbreds, PCA (Principal Component Analysis) was carried out with 55 SNPs, which resulted in the classification of inbreds into 4 groups based on PC1 (52%) and PC2 (11%), thus causing differentiation between the inbreds. A similar classification pattern for PCA was observed from hierarchical clustering analysis. The SNP set developed in this study has the potential for application to cultivar identification, F1 seed purity test, and marker-assisted backcross (MABC) not only for 20 elite inbreds but also for diverse resources for watermelon breeding.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.4
• /
• pp.427-432
• /
• 1997

Re-188 is useful candidate for therapeutic radionuclide because it has a physical half life of 17 hours, contains beta emissions suitable for therapy(maximum energy 2.12MeV) and emits a gamma ray that is suitable for quantitative diagnostic scanning(155keV). To use Re-188 as a radionuclide compound of angioplasty balloon radiotherapy, we investigated the labelling method and biodistribution of Re-188-DTPA We postulated that labeled Re-188-DTPA is preferable because it would be excreted via urinary system more easily than other compounds. To label Re-188 with DTPA, 1ml of 222MBq(6mCi) of Re-188 was added to DTPA solution(DTPA 20mg, $SnCl_2{\cdot}2H_2O$ 10mg, pH 3.5) and boiled at $100^{\circ}C$ for 120min in water bath. pH was adjusted to 5 with 2.3% sodium acetate. Labeling efficiency was measured using TLC-SG(acetone, saline). We evaluated biodistribution of Re-188-DTPA in sacrificed mice at 10 and 60 minutes after injection. We acquired images of kidneys, and drew time-activity curves in normal dogs and rats and calculated Tmax and Tl/2 in rats. The labelling efficiency was 95.7% on average. Labelling of Re-188-DTPA was.stable(90% after 5hours) in vitro at room temperature. According to time-activity curves of dogs and rats, it took 15 to 20 minutes after injection for Re-188-DTPA to be washed out through kidneys. In conclusion, Re-188-DTPA was successfully labeled, Re-188-DTPA was stable in vitro and was excreted early via kidneys in animals. We could recommend Re-188-DTPA as radionuclide of potential use in angioplasty balloon radiotherapy.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.2
• /
• pp.42-53
• /
• 2020

In this study, heavy metal in road-deposited sediments (RDS) and marine sediment around Gwangyang Bay area have been investigated to assess the pollution status of metals and to understand the environmental impact of RDS as a potential source of metal pollution. Zn concentration for <63 ㎛ size fraction was the highest (2,982 mg/kg), followed by Cr, Ni, Pb, Cu, As, Cd, and Hg. Metal concentrations in RDS increased with decreasing particle size and relatively higher concentrations were observed around the metal waste and recycling facilities. For particle size in RDS smaller than 125 ㎛, EF values indicated that Zn was very high enrichment and Cr, Cd, Pb were significant enrichment. The concentrations of metals in marine sediments were mostly below the TEL value of sediment quality guidelines of Korea. However, the Zn concentrations has increased by 30~40% compared to 2010 year. The amounts of Zn, Cd and Pb in less than 125 ㎛ fraction where heavy metals can be easily transported by stormwater runoff accounted for 54% of the total RDS. The study area was greatly affected by Zn pollution due to corrosion of Zn plating materials by traffic activity as well as artificial activities related to the container logistics at Gwangyang container terminal. The fine particles of RDS are not only easily resuspended by wind and vehicle movement, but are also transported to the surrounding environments by runoff. Therefore, further research is needed on the adverse effects on the environment and ecosystem.

• Spatial Information Research
• /
• v.22 no.1
• /
• pp.65-73
• /
• 2014

Recently indoor navigation with indoor map such as Indoor Google Maps is served. For the services, constructing indoor data are required. CityGML and IFC are widely used as standards for representing indoor data. The data models contains spatial information for the indoor visualization and analysis, but indoor navigation requires semantic and topological information like graph as well as geometry. For this reason, IndoorGML, which is a GML3 application schema and data model for representation, storage and exchange of indoor geoinformation, is under standardization of OGC. IndoorGML can directly describe geometric property and refer elements in external documents. Because a lot of data in CityGML or IFC have been constructed, a huge amount of construction time and cost for IndoorGML data will be reduced if CityGML can help generate data in IndoorGML. Thus, this paper suggest practical use of CityGML including deriving from and link to CityGML. We analyze relationships between IndoorGML and CityGML. In this paper, issues and solutions for linkage of IndoorGML and CityGML are addressed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.62-72
• /
• 2010

PM OLED is used in many applications as one of the display for the next generation. The most essential problems are the power dissipation and the short life time in applying PM OLED into a commercial application. Many efforts are made in developing the panel and in improving the circuit for expanding the current market wider. The life time in PM OLED is expanded by lessening the power dissipation of the circuit for the magnitude of the driving current is lowered. It is possible to minimize the power dissipation from improving the driving technology. The classical technology, Row-to-Row driving, is that row is selected one by one while applying the column current input individually. The multi-line driving is a new technology which is to select multiple rows simultaneously while applying the column current as a whole. However, the solution of the multi-line driving is NP-complete problem. The efficiency is dependant on the sort of picture and the driving condition. This paper presents the new efficient multi-line driving which is that the multiple lines are selected by applying column current together after grouping the simultaneous driving group applying the gnew efficient muthe coi-line dr coefficient. Bengrouping the several rows which has the higher coi-line dr coefficient, the more efficient driving is realized to present the high quality image and to lessen the power dissipation and to stretch the life time in the PM OLED.

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.29-43
• /
• 2014

The development of NGS technologies, such as scientific workflows, has reduced the time required for decoding DNA sequences. Although the automated technologies change the genome sequence analysis environment, limited computing resources still pose problems for the analysis. Most scientific workflow systems are pre-built platforms and are highly complex because a lot of the functions are implemented into one system platform. It is also difficult to apply components of pre-built systems to a new system in the cloud environment. Cloud computing technologies can be applied to the systems to reduce analysis time and enable simultaneous analysis of massive DNA sequence data. Web service techniques are also introduced for improving the interoperability between DNA sequence analysis systems. The workflow-based middleware, which supports Web services, DBMS, and cloud computing, is proposed in this paper for expecting to reduceanalysis time and aiding lightweight virtual instances. It uses DBMS for managing the pipeline status and supporting the creation of lightweight virtual instances in the cloud environment. Also, the RESTful Web services with simple URI and XML contents are applied for improving the interoperability. The performance test of the system needs to be conducted by comparing results other developed DNA analysis services at the stabilization stage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.29-38
• /
• 2009

In this paper, a high performance pipelined computing design of parallel multiplier-temporal buffer-parallel accumulator is present for the convolution-based non-cascaded architecture aiming at the real time Discrete Wavelet Transform(DWT) processing. The convolved multiplication of DWT would be reduced upto 1/4 by utilizing the filter coefficients symmetry and the up/down sampling; and it could be dealt with 3-5 times faster computation by LUT-based DA multiplication of multiple filter coefficients parallelized for product terms with an image data. Further, the reutilization of computed product terms could be achieved by storing in the temporal buffer, which yields the saving of computation as well as dynamic power by 50%. The convolved product terms of image data and filter coefficients are realigned and stored in the temporal buffer for the accumulated addition. Then, the buffer management of parallel aligned storage is carried out for the high speed sequential retrieval of parallel accumulations. The convolved computation is pipelined with parallel multiplier-temporal buffer-parallel accumulation in which the parallelization of temporal buffer and accumulator is optimize, with respect to the performance of parallel DA multiplier, to improve the pipelining performance. The proposed architecture is back-end designed with 0.18um library, which verifies the 30fps throughput of SVGA(800$\times$600) images at 90MHz.