• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.173-178
• /
• 1993

The most appropriate mixing ratio of fly ash to bottom ash obtained from compaction characteristics and CBR values is varying from 5:5 to 6:4. But these mixed ashes are frost-susceptible materials according to judging by the paticle-size distribution because of a lot of silty-size paticles. In this study, the frost-susceptibility of compacted coal ash with proper mixing ratio is examined experimentally for use of subgrade materials. And, the efforts have been made to find proper cement addition in making these mixed ashes frost-insusceptible. It was revealed that these mixed ashes are frost-susceptible, and 4% of cement content is required to be made frost-insusceptable. It was found that amount of frost heave of these mixed ashes decreases with the unconfined compressive strength, and increases with log k if the permeability coefficient k is as low as the water into the freezing front of these mixed ashes is restricted.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.4
• /
• pp.93-104
• /
• 2006

This paper tries to implement BOM calculation effectively by sharing the data in CAD management system and BOM systems. For this purpose, a component-based software system in this thesis was implemented by using CAD drawing systems. It can be found from this research that errors happened were reduced sharply. Especially, the BOM calculation period was cut from 2 weeks to 2days, and at the same time, the correct rate achieved 95%. Moreover, there are some following effects of our implemented system: First of all, because component development method was adopted in this paper, it makes program easy to reuse, to keep/maintenance as well as modify. Second, long-distant management is possible by using web-based development method. Third, data management is made effective by constructing image and tort database. Fourth drawing management is systemized, Finally, the system is suitable for companies.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.82-89
• /
• 2008

Ideal rotator cuff repair is to maintain high fixation strength and minimize gap formation for optimizing the environment of biologic healing of tendon to bone. Among the current repair techniques, the suture bridge technique is superior to single- or double-row repair in ultimate load to failure, gap formation, restoring anatomical footprint and achieving pressurized contact area. The suture bridge technique also minimizes gap formation and has rotational and torsional resistances allowing early rehabilitation. However, despite superior biomechanical characteristics of the suture bridge technique, there is no evidence that these mechanical advantages result in better clinical outcomes. Furthermore, there is no difference in failure rates between the double-row repair and suture bridge techniques. An appropriate repair technique should be determined based on tear size and pattern and tendon quality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.144-148
• /
• 2009

지구온난화로 인한 홍수빈도 및 강우강도의 증가로 홍수피해의 규모는 더욱 증가하고 있다. 그리고 방재대책도 발생한 피해에 대한 복구를 주된 정책으로 하던 소극적 자세에서 벗어나 과학적 공학적 접근을 통해 재해에 대응할 수 있는 기술을 개발하는 적극적 홍수방어 체계를 구축하고 있다. 또한, 설계빈도의 무조건적인 상향조정에 따른 확정론적인 방법에 의존하기 보다는 추계학적 방법을 도입한 수문량 확충 및 매개변수의 불확실성 분석이 필요성이 대두되고 있는 실정이다. 일반적으로 수공구조물의 설계 시에는 설계홍수량을 사용하는데 이는 홍수특성, 홍수발생빈도, 홍수발생 가능성 등을 수공구조물의 규모와 파괴 시 예상되는 피해 정도에 따라 요구되는 안전성을 함께 고려해 수공구조물의 설계기준으로 활용된다. 설계홍수량은 지속시간과 재현기간을 사전에 지정하여 빈도분석을 통해 설계강우량을 산정하고 이를 강우-유출 분석을 함으로써 산정된다. 설계강우량은 빈도분석을 위해 선택된 강우형태에 따른 수문학적 무작위성을 포함하고 있다. 따라서 시간적 변동을 고려한 적절한 강우양상 형태의 선택은 수문학적으로 안전한 수공구조물의 설계 및 평가에 매우 큰 영향을 미친다. 현재의 경우는 강우형태에 대한 선택이 경험에 의해 임의로 이루어지므로, 토목공학자는 여러 가지 발생 가능한 강우형태에 따른 시간적 분포에 대해 고려해야 한다. 본 연구에서는 Huff분위에 따른 무차원 누가 강우곡선을 이용해 강우변동양상 생성을 위한 제약조건을 log-ratio 변환을 이용해 극복하였으며, 결과의 통계 특성치를 Johnson 분포를 통해 표준정규분포로 변환시켰다. 무작위 변수 발생 후 강우양상별 표준정규값의 상관행렬을 이용하여 상관성이 있는 무작위변수로 변환하였다. 얻어진 상관성을 갖는 무작위변수는 log-ratio 역변환을 통해 상관성을 갖는 변수로 재변환해서 무차원화된 강우곡선을 얻을 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.53-67
• /
• 2001

In this study the pilot test of CGS as injection method by low slump mortar was performed and the results were analyzed in order to find out the application of this method and effect of settlement restraint. The site far pilot test is adjacent to apartments supported by pile foundations. Sand drain method was performed previously as countermeasures against settlement, but settlement occur continuously because this ground is very soft. Site investigations such as SPT, DCPT and vane shear test were performed to determine the characteristics of ground improvement. Field measurements and FDM analysis were performed on purpose to find out the displacement of ground during injection works. From the results of this study, CGS method can be optimized by the control of diagram, space, depth, injection material, and injection pressure. CGS improved soft ground compositely by the bearing effect of CGS columns and reinforcement of adjacent ground. Considering that increase of N value is about 2.1, CGS can be considered as an effective method to increase the bearing capacity as well as to stop the settlement of soft ground. It is also expected to be economic and effective in improvement of ground when it is used in applicable sites.

• Korean Journal of Plant Resources
• /
• v.22 no.4
• /
• pp.293-298
• /
• 2009

We prepared densified wood pellet by agricultural waste. The hemp woody core was used as replacing wood resource. Hemp was separated into the bast fiber and the woody core by hot steaming treatment. The hemp woody core had a similar lignin content(19.4%) and carbohydrate composition with hardwood(20-25% lignin in hardwood), respectively. Also, the hemp had a low ash content(0.5%), which resulted in a low ash formation in pellet burning. Heating value of the hemp pellet(18.40 MJ/kg) had a very similar to the pellet made by hardwoods. The hemp woody core could be replaced the hardwood for densified wood pellet.

• The KIPS Transactions:PartA
• /
• v.13A no.1 s.98
• /
• pp.79-86
• /
• 2006

Recently the tagSNP selection problem has been researched for reducing the cost of association studies between human's diversities and SNPs. General approach for this problem is that all of SNPs are separated into appropriate blocks and then tagSNPs are chosen in each block. Marsel in this paper is the system that involved the concept of linkage disequilibrium for overcoming the problem that the existing block partitioning approaches have short of biological meanings. In most approaches, the contiguous regions, which recombinations have LD coefficient |D'| and then tagSNP selection step is performed. And MarSel guarantees the minimum tagSNP selection using entropy-based optimal selection algorithm when tagSNPs are chosen in each block, and enables chromosome-level association studies using efficient memory management technique when input is very large-scale dataset that is impossible to be processed in the existing systems.

• The KIPS Transactions:PartC
• /
• v.18C no.1
• /
• pp.7-14
• /
• 2011

Power analysis attack on low-power consumed security devices such as smart cards is very powerful, but it is required that the correlation between the measured power signal and the mid-term estimated signal should be consistent in a time instant while running encryption algorithm. The power signals measured from the security device applying the random clock do not match the timing point of analysis, therefore random clock is used as counter measures against power analysis attacks. This paper propose a new constant pitch based time alignment for power analysis with random clock power trace. The proposed method neutralize the effects of random clock used to counter measure by aligning the irregular power signals with the time location and size using the constant pitch. Finally, we apply the proposed one to AES algorithm within randomly clocked environments to evaluate our method.

• Journal of Broadcast Engineering
• /
• v.12 no.1 s.34
• /
• pp.41-52
• /
• 2007

The 3DTV services can be seen as a general case of the multi-view video that has been receiving a significant attention lately. However, the key factors that influence the success of 3DTV are the availability of content, the ease of use, the quality of contents, and the reduction of cost. This paper deals primarily with the perceptual improvement in image quality, especially based on human factors. An optimal asymmetrical coding method for binocular and multi-view images is presented. The quantitative value of asymmetrical rate to maintain optimized subjective image quality is explored. Also we analyze how edges of 2D images affect on 3D perceptions and propose an edge-preserving algorithm to perform perceptual improvements. Experimental results demonstrate that the proposed algorithm enhances subjective image quality much better than conventional methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.157-165
• /
• 1992

IMS, a precision coordinate measuring system using theodolites, is being used to survey and align precision mechanical structures. Compared to conventional mechanical devices for precision measurement, such as CMM (Coordinate Measuring Machine), the target objects of IMS have little limitations in their sizes and shapes, and can be measured in place. Also since IMS displays the coordinate values in real-time, it is possible to perform measurement and alignment of the objects simultaneously. In this paper, the elements and functions of IMS are introduced and a mathematical model of the new software, which utilizes an altered version of the 'Bundle' adjustment algorithm of analytical photogrammetry for the specific use of IMS, is demonstrated. Differences of the mathematical model of IMS from that of analytical photogrammetry are discussed by following the steps of the 'Measurement' option in the 'Main Menu' of the software. A new IMS calibration method is proposed to calculate better first approximations for the 4 unknown theodolite parameters and the coordinates of target objects. The software provides the 'Bundle' procedure for the first approximations of the unknowns before the real-time measurement. It also provides an opportunity of 'bundling' to re-adjust the collected positional data at the end of the measurement.