• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.67-79
• /
• 2005

The field plate load test has a good potential for determining modulus since it measures both plate pressure and settlement. Conventionally the modulus has been assumed to be a constant secant value defined from the settlement of the plate at a given load intensity. A constant modulus (modulus of subgrade reaction, k), however, may not be a representative value of subgrade soil under working load. Field strain(o. stress)-dependent modulus characteristics of subgrade soils, at relatively low to intermediate strains, are important in the pavement design. In this study, the field strain dependent moduli of subgrade soils were obtained using cyclic plate load test. Testing procedure and data reduction method are proposed. The field crosshole and laboratory resonant column tests were also performed to determine field nonlinear modulus at $0.001\%\;to\;0.1\%$ strains, and the modulus values and nonlinear trends are compared to those obtained by cyclic plate load tests. Both modulus values match relatively well when the different state of stress between two tests was considered, and the applicability of field cyclic plate load test for determining nonlinear modulus values of subgrade soils is verified.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.168-183
• /
• 2020

Efforts had been made to eliminate the brittleness unique to cast ironware from 5 BC up until the time that cast ironware became widely used. One of the techniques used to this end was to produce the cast ironware in one kiln and then anneal it in another kiln. This technique condensed or removed the carbon in the structure to eliminate the brittleness of cast ironware and enable forging. To clarify the nature of this technique, this study examined cast ironware made of malleable cast iron, which manifests the characteristics of the annealing technique for cast ironware excavated on the Korean peninsula, based on current steelmaking technology and research results from China and Japan. Results confirmed that all cast ironware made of malleable cast iron had been imported into Korea until the Proto-Three Kingdoms Period. Also, since the Chiljido (Seven-Branched Sword), which is housed at the Ishigami Shrine in Japan, appears to have been produced in the Korean peninsula, it is determined that Baekje in the 4^th century must have possessed such an annealing technique. At that time, however, iron was produced mainly with an iron bloom, and a large amount of forged iron was produced with a steel bloom smelted from an iron bloom. In addition, most of the cast ironware that was used previously, except for cast iron hoes, had been replaced by forged ironware. In other words, this annealing technique was not used frequently until the Three Kingdoms Period. However, it spread broadly during the Unified Silla Period in so much as it was identified in the Jangan-ri remains, which represented the regional hub of iron production and distribution.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.71-76
• /
• 2011

In this study, a heavy metal stabilization treatment using waste resource stabilizing agents was utilized on army firing range soil contaminated with Pb and Cu. Both calcined oyster shells (COS; 5% w/w) and waste cow bone (WCB; 3% w/w) were applied for a wet-curing duration of 28 days. Following the stabilization treatment, the process efficiency was evaluated by various extraction methods for Pb and Cu. Neutral and weak acid extraction methods, such as water soluble extraction and SPLP, did not show positive results for heavy metal stabilization with very low leachability. On the other hand, TCLP and 0.1 N HCl extraction showed that the stabilizing agents significantly reduced the amount of the heavy metals leached from the soil, which strongly supports that the treatment efficiency is positively evaluated in acidic leaching conditions. Specifically, in the 0.1 N HCl extraction, the reduction efficiencies of Pb and Cu leaching were 99.9% and 83.9%, respectively. From the sequential extraction results, a difference between Pb and Cu stabilization was observed, which supports that Pb stabilization is more effective due to the formation of insoluble Pb complexes. This study demonstrates that the application of waste resources for the stabilization of heavy metals is feasible.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.30-36
• /
• 1999

This paper describes the relationship between the bending strength properties of sloped finger-jointed woods and the acoustic emissions (AEs) generated during the test. Pinus densiflora pieces were cut in sloped-finger types and glued with four kinds of adhesives (polyvinyl acetate, polyvinyl-aeryl, oilic urethane and resorcinol-phenol resin). The results were as follows: The lower the bending strength(load) was, the earlier the generation time of AE event count got and the higher the increasing rate of AE event count became in the sloped finger-jointed specimens bonded with polyvinyl acetate and oilic urethane resin adhesives. Therefore, the slope from load-AE cumulative event count curve was very steep. The AE event count for resorcinol-phenol resin adhesive obtained even from low load level was abundant. The AE event count continuously increased as load increased and the event count was much more than one in the other conditions. The slope from load-AE cumulative event count curve was very gentle compared with other conditions. The patterns of AE event count and count were very similar. The relationship between the MOR and the AE parameter from load and AE cumulative event count in the early stage of the sloped finger-jointed specimens bonded with polyvinyl acetate, oilic urethane and resorcinol-phenol resin adhesives was much greater than that between the MOE and the MOR. Therefore, the AE signals obtained during bending test are useful for estimating the strength of sloped finger-jointed specimens.

• Journal of Internet Computing and Services
• /
• v.10 no.4
• /
• pp.87-103
• /
• 2009

Grid computing is an expanded technology of distributed computing technology to use low-cost and high-performance computing power in various fields. Although the purpose of Grid computing focuses on large-scale resource sharing, innovative applications, and in some case, high-performance orientation, it has been used as conventional distributed computing environment like clustered computer until now because Grid middleware does not have common sharable information system. In order to use Grid computing environment efficiently which consists of various Grid middlewares, it is necessary to have application-independent information system which can share information description and services, and expand them easily. Thus, in this paper, we propose a semantic information system framework based on web services and ontology for Grid computing environment, called WebSIS. It makes application and middleware developer easy to build sharable and extensible information system which is easy to share information description and can provide ontology based platform-independent information services. We present efficient ontology based information system architecture through WebSIS. Discovering appropriate resource for task execution on Grid needs more high-level information processing because Grid computing environment is more complex than other traditional distributed computing environments and has various considerations which are needed for Grid task execution. Thus, we design and implement resource information system and services by using WebSIS which enables high-level information processing by ontology reasoning and semantic-matching, for automation of task execution on Grid.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.522-526
• /
• 2010

Heat storage application techniques can be categorized into the sensible heat storage and the latent heat storage according to the method of heat storage. Heat storage is the way of saving remaining heat when heating and cooling loads are light, and then using it when the heating and cooling loads are heavy. Latent heat storage is defined as the method of saving heat by using substances which have high potential heat when phase change is in the range of a certain temperature and when heat storage space is small, compared to those of sensible heat storage and it is possible that absorption and emission of heat at a certain temperature. This study is conducted to save energy when either air-conditioning or heating is operated in a building. We have tried to find out the essential properties of matter and the optimum mixing rate about cement and gypsum for building materials, which have been widely used for proper phase change materials (PCM), when thermal environment property is applied. So we obtained the result of the cooling delay effect about 19% with heat storage mortar containing 3 wt% of PCM.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.43-50
• /
• 2012

The concept of revascularization of necrotic pulps regained interest and became an alternative conservative treatment option for young permanent teeth with immature roots. Revascularization of immature teeth with apical periodontitis depends mainly on disinfection of the canal. Since the infection of the root canal system is considered to be polymicrobial, a combination of drugs would be needed to treat the diverse flora. A triple antibiotic mixture of metronidazole, ciprofloxacin, and minocycline was used as an intracanal medicament. However, discoloration was developed after applying the triple antibiotic mixture. It is believed that the marked discoloration is related to the use of minocycline. The aim of this article was to present cases of coronal discoloration after triple antibiotic therapy in immature tooth and was treated with bleaching technique to control coronal discoloration. In conclusion, revascularization by using triple antibiotics promotes a paradigm shift in treating endodontically involved permanent teeth. However, we should understand that triple antibiotics containing minocycline induces tooth discoloration. Further research to prevent coronal discoloration should be investigated and suggested for the safe use of triple antibiotics.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.2
• /
• pp.125-135
• /
• 2017

The purpose of this study is verification of the anti-oxidant effect and anti-inflammatory effect of Eggplant-cheongyeolsodokum composed of 8 herbs (Solanum melongena L., Lonicera japonica Thunb., Glycyrrhiza uralensis Fisch., Ligusticum chuanxiong Hort., Angelica gigas Nakai., Coptis deltoidea C. Y. Cheng et Hsiao., Gardenia jasminoides J. Ellis., Forsythia suspensa Vahl) to confirm the possibilities as useful cosmetic material. We used the modified prescription of 'cheongyeolsodokum' contained in Korean traditional medical book 'Donguibogam' as composition of Eggplant-cheongyeolsodokum and their proportions. Eggplant-cheongyeolsodokum were extracted with hot water, 70% ethanol and then powdered. To confirm anti-oxidant effect, we investigated radical scavenging ability (DPPH, $ABTS^+$, superoxide), superoxide dismutase (SOD)-like activity, total polyphenolic contents. Also to confirm anti-inflammatory effect, we investigated inhibition effect of nitric oxide (NO) production in lipopolysaccharide (LPS)-stimulated RAW264.7 macrophages, and Inhibition effect of the expression of inflammatory-related proteins (iNOS, COX-2) by western blot analysis. As a result, Eggplant-cheongyeolsodokum showed good anti-oxidant and anti-inflammation effects, we suggest that it can be used as an active ingredient for cosmetics.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.613-622
• /
• 2012

A chrome absorbent that is useful in rapid magnetic recovery and recycling was developed though a synthesis of Multi-Terminalized Magnetic-core Dendrimer (MTMD). Divergence through coprecipitation and rotation growth was used for synthesis. The dendrimer was multi-terminilized through methyl propionate and glutaric acid. The property analysis of the synthesized sample was performed through XRD, FT-IR, TEM, EDS, TGA and zeta potential analyzer. A magnetic-core of MTMD had a magnetite crystal and the size of 4th generation dendrimer was identified to be from 15 nm to 20 nm. Through the analysis of the TGA, the rate of the dendrimer branch for the first generation dendrimer was about 7% and 3% of diminished weight occurred as the generation grows. Also, the potential of the dendrimer when multi-terminalized, had variation from 25.26 mV to -6.53 mV. As a result of MTMD adsorption experiment, it absorbed more than 80% within 5 minutes and indicated absorptivity of 6.308 mg/g. When it was compared with COOH Dendrimer (COOH-D) after magnetic recovery, the recovery time was rapidly reduced by more than half and it could recover 100% within 30 minutes. In case of the regeneration experiment that used chrome, it was identified to maintain the same adsorptivity for four runs.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.1
• /
• pp.96-106
• /
• 2002

this paper, we propose a flexible, reusable, and extensible HL7 encoding and decoding framework using a Message Object Model (MOM) and Message Definition Repository (MDR). The MOM provides an abstract HL7 message form represented by a group of objects and their relationships. It reflects logical relationships among the standard HL7 message elements such as segments, fields, and components, while enforcing the key structural constraints imposed by the standard. Since the MOM completely eliminates the dependency of the HL7 encoder and decoder on platform-specific data formats, it makes it possible to build the encoder and decoder as reusable standalone software components, enabling the interconnection of arbitrary heterogeneous hospital information systems(HISs) with little effort. Moreover, the MDR, an external database of key definitions for HL7 messages, helps make the encoder and decoder as resilient as possible to future modifications of the standard HL7 message formats. It is also used by the encoder and decoder to perform a well formedness check for their respective inputs (i. e., HL7 message objects expressed in the MOM and encoded HL7 message strings). Although we implemented a prototype version of the encoder and decoder using JAVA, they can be easily packaged and delivered as standalone components using the standard component frameworks like ActiveX, JAVABEAN, or CORBA component.