• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.18-27
• /
• 2003

Interfacial properties and microfailure degradation mechanisms of the oxygen-plasma treated biodegradable poly(p-dioxanone) (PPDO) fiber/poly(L-lactide) (PLLA)composites were investigated for the orthopedic applications as implant materials using micromechanical technique and surface wettability measurement. PPDO fiber reinforced PLLA composite can provide good mechanical performance for long hydrolysis time. The degree of degradation for PPDO fiber and PLLA matrix was measured by thermal analysis and optical observation. IFSS and work of adhesion, $W_a$ between PPDO fiber and PLLA matrix showed the maximum at the plasma treatment time, at 60 seconds. Work of adhesion was lineally proportional to the IFSS. PPDO fiber showed ductile microfailure modes at We initial state, whereas brittle microfailure modes appeared with elapsing hydrolysis time. Interfacial properties and microfailure degradation mechanisms can be important factors to control bioabsorbable composites performance because IFSS changes with hydrolytic degradation.

• Composites Research
• /
• v.31 no.6
• /
• pp.317-322
• /
• 2018

In various industry, the composite is tried to be applied to products and thermoplastic based composite is in the spotlight because this composite can be recycled. The use of continuous fiber thermoplastic (CFT) method increased gradually than long fiber thermoplastic (LFT). In this study, tensile, flexural, and impact test of different array types of glass fiber (GF)/thermoplastic composites were performed to compare with GF array. Impregnation property between GF mat and thermoplastic was determined using computed tomography (CT). At CFT method, thermoplastic film is not wet into GF roving and many voids are appeared into composite. This phenomenon affects to decrease mechanical properties. Plain pattern GF mat was the best mechanical and impregnation properties that distance between two roving was set closely to $100{\mu}m$.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.379-384
• /
• 2007

The nanocomposites with inorganic nano powder, improved thermal stability, were prepared by urethane polymerization. The structure and surface properties of the nanocomposites were determined by X-ray diffraction and FT-IR, respectively. The thermal stabilities were studied using TGA and DSC. Their morphologies and mechanical properties were observed by SEM and UTM. As a result, the nanocomposites with MMT led to the increase of the silicate layers. The distance between layers of the nanacomposites with MMT was increased by $7.5{\AA}$ and the new peaks at $1038cm^{-1}$ were shown in the presence of the Si-O groups on the silica. The thermal stabilities of the nanocomposites were higher than those of pore polyurethane matrix. The nanocomposites had higher in mechanical properties than the pure polyurethane matrix.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.44-51
• /
• 2012

In this study, hardened loess bodies, which did not compose of cement or any chemical binder, were made and tested to evaluate the physical properties such as slump, air content, and compressive strength. Addition of a natural binding material to mixture of loess and lime showed better performance in physical properties. However a lime among natural binding materials is considered as a superior binder to improve the properties of the hardened bodies. According to the experimental results, mixing proportion with 45% of W/B ratio, $285kg/m^3$ of water content, and 60% lime substitution ratio was recommended to acquire the good performance of physical properties for the hardened loess bodies.

• Composites Research
• /
• v.30 no.3
• /
• pp.175-180
• /
• 2017

Currently, since carbon fiber reinforced plastics (CFRPs) are lightweight and have excellent physical properties, their demand has increased dramatically. Many works have studied the CFRPs based on recycled thermoplastics. In this study, the applicability of recycled composite was evaluated using recycled polyethylene terephthalate (PET). PET was collected from waste materials used in beverage bottles and processed to produce PET films. Optimal thermoforming temperature and time were analyzed by comparing the mechanical properties with forming temperature and time difference for producing PET films. CF mat and PET film were used to determine the suitable parameters for the optimum thermoforming of CF/PET composites. The mechanical properties of each thermoforming condition were verified by bending test. The degree of impregnation of the PET film into the CF mat was evaluated by cross-sectional photographs, whereas the interfacial properties were evaluated by interlaminar shear strength (ILSS). Ultimately, it was confirmed that the thermoforming condition for forming the CF/recycled PET composites yielding the optimal mechanical and interfacial properties was at $270^{\circ}C$ for 5 minutes.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.3
• /
• pp.135-146
• /
• 1996

In this study, the properties of super flowing concrete containing fly ash were experimentally investigated and compared with those of ordinary concrete. Tests were carried out on five types of super flowing concrete mixes containing fly ash and three types of ordinary concrete mixes without fly ash. Flow test, 0-funnel test, box test, L type test and slump test were carried out to obtain the properties for flowability and workability of fresh concrete. The mechanical properties of hardened concrete were also investigated in terms of compressive strength, splitting tensile strength, modulus of elasticity, creep and drying shrinkage. In fresh concrete, it was found that super flowing concrete had excellent workability and flowability compared with ordinary concrete, and had self-compactable performance. Super flowing concrete *also had good mechanical properties at both early and late ages with compressive strength reaching as high as 40 MPa at 28 days. The creep deformation of super flowing concrete investigated was relatively lower than that of ordinary concrete, but drying shrinkage was much higher.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.773-780
• /
• 2015

Traditionally, additive manufacturing (AM) technology has been used to fabricate prototypes in the early development phase of a product. This technology is being applied to release manufacturing of a product because of its low cost and fast fabrication. AM technology is a process of joining materials to fabricate a product from the 3D CAD data in a layer-by-layer manner. The orientation of a layer during manufacturing can affect the mechanical properties of the product because of its anisotropy. In this paper, tensile testing of polymer-based specimens were built with a typical AM process (FDM, PolyJet and SLA) to study the mechanical properties of the AM materials. The ASTM D 638 tensile testing standard was followed for building the specimens. The mechanical properties of the specimens were determined on the basis of stress-strain curves formed by tensile tests. In addition, the fracture surfaces of the specimens were observed by SEM to analyze the results.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.200-206
• /
• 1996

This study was carried out in order to investigate the effect of additives on Jeungpyun (fermented and steamed rice cake) Preparation. Soy bean flour, whole milk Powder, skim milk Powder, egg yolk, egg white, and mugwort were added in the Preparation of Jeungpyun. There were not significantly difference in loaf volume between control and experimental groups addfd egg yolk, egg white and mugwort. In sensory evaluation, the hardness of Jeungpyun containing of soy bean flour, milk Powder, and egg were lower than control The Jeungpyun containing mugwort was more bitter and harder than the control. The rheological properties measured by texturometer were significantly different among the Jeungpyun added with different kinds of additives. The hardness was significantly lower in Jeungpyun containing whole milk Powder and soy bean flour and springiness was higher in mugwort Jeungpyun compared with the control. In 4$^{\circ}C$ storage, retrogradation of Jeungpyun assessed from hardness measured by texturometer was delayed by addition of soy bean flour and whole milk powder.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.61-74
• /
• 2011

This is a fundamental research on use as fill material of lightweight waste such as bottom ash and tire shred. We carried out the test for particle size distribution, specific gravity, density, shear strength, permeability and vertical compression settlement, considering water content change and temperature effect of several waste materials. Bottom ash, which is lighter than soils, has similar permeability and particle size distribution to those of weathered soils. But permeability may differ depending on the particle size distribution. The shear strength aspect of bottom ash and tire shred mixed materials are similar to that of natural fill materials. In the 1-D vertical compression settlement test, we could be assured that bottom ash and tire shred mixed materials showed similar compression settlement to that of sand under actual vertical stress. Furthermore, materials including bottom ash showed smaller compression settlement than that of weathered soils in the long-term settlement test under wetting and freezing-thawing condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.423.2-423.2
• /
• 2014

비정질 실리콘 박막 태양전지는 1970년대 중반 개발된 이후 현재까지 지속적으로 연구 개발이 이루어져 왔으며, 대면적의 용이성 및 재료 사용의 효율성 등 산업적 측면에서 많은 장점을 보이고 있다. 하지만, 재료 특유의 무질서(disorder)로 인한 Voc의 한계 및 광 열화 현상 등의 문제점이 극복해야 할 과제로 남아있다. 이를 개선하기 위한 시도 중 하나로 나노입자를 포함한 실리콘 박막 제작을 통해 재료의 무질서도를 낮추고 전기광학적 물성을 개선하는 방법이 제안되고 있다. 본 연구에서는 유도결합 플라즈마(ICP, Inductively coupled plasma)를 사용하여 제작한 실리콘 나노입자 박막으로 비정질 실리콘 박막의 한계를 극복하고자 한다. 실리콘 나노입자를 사용하여 조밀한 박막을 제작하는데 중요한 변수로는 유도결합 플라즈마 반응기 상, 하부의 압력차 및 이로 인한 제트분사의 속력, 그리고 나노 입자의 크기 등이 중요하게 작용한다. 합성된 입자의 크기와 물성의 변화는 유입되는 반응 가스의 양, 공정압력과 파워에 의존한다. 실리콘 나노입자 박막을 다양한 플라즈마 조건에 따라 제작한 후 XRD, Raman, SEM, TEM을 이용하여 물성 변화를 관찰하였으며, 이를 통해 박막태양전지로의 응용 가능성을 제시하고자 한다.