• Title/Summary/Keyword: 재료선정

Search Result 874, Processing Time 0.025 seconds

Assessment of Application of the Recycled Aggregate Crushed in-situ for Anti-freezing Layer and Lean Concrete Base Course (현장파쇄 순환골재의 동상방지층 및 빈배합 콘크리트층에 대한 적용성 평가)

  • Kim, Jin-Cheol;Kim, Hong-Sam
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.1 no.1
    • /
    • pp.98-107
    • /
    • 2005
  • In other to recycle the waste concrete produced in stiu on the construction and management in highway, the recycled aggregates were experimentally examined in a practical application for anti-freezing layer and lean concrete base course. From the results, the mobile impact crusher and the eccentric-mounted cone and jaw were superior to the others for the graded aggregates. In the case of anti-freezing layer, the recycled one was easily controlled since the dry densities, contrary to natural one, were not largely changed with the moisture contents. It was found that the 7days compressive strengths of lean concrete were above the 10MPa regardless of the crushing types. From the result of testing the bearing capacity of anti-freezing layer, it was found that when the recycled aggregates mixed with natural sand would be within the required gradations, the layer meets the requirements of limitation and the percentage to passing 2-20mm sieve increased by 5~13% because the flimsy mortars on aggregate were re-crushed by vibrated-roller compactor. Although the compressive strength of lean concrete was 71~85% of the natural coarse aggregate, the recycled aggregates are applicable to the lean concrete because they largely exceeded the required strength, 5.8MPa.

  • PDF

Effect of the marginal position of prosthesis on stress distribution of teeth with abfraction lesion using finite element analysis (보철물 변연의 위치가 abfraction된 치아의 응력 분포에 미치는 영향에 대한 유한요소법적 분석)

  • Kim, Myeong-Hyeon;Lee, Cheong-Hee
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.52 no.3
    • /
    • pp.202-210
    • /
    • 2014
  • Purpose: The aim of this study was to evaluate the stress concentration and distribution whether restoring the cavity or not while restoring with metal ceramic crown on tooth with abfraction lesion using finite element analysis. Materials and methods: Maxillary first premolar was selected and made a total of 10 finite element model. Model 1 was natural tooth; Model 2 was tooth with metal ceramic crown restoration which margin was positioned above 2 mm from CEJ; Model 3 was tooth with metal ceramic crown restoration which margin was positioned on CEJ; Model 4 was natural tooth which has abfraction lesion; Model 5 and 6 had abfraction lesion and the other condition was same as model 2 and 3, respectively; Model 7 was natural tooth which had abfraction lesion restored with composite resin; Model 8 and 9 was tooth with metal ceramic crown after restoring on abfraction lesion with composite resin; Model 10 was restored tooth on abfraction lesion with composite resin and metal ceramic crown restoration which margin is positioned on lower border of abfraction lesion. Load A and Load B was also designed. Von Mises value was evaluated on each point. Results: Under load A or load B, on tooth with abfraction lesion, stress was concentrated on the apex of lesion. Under load A or load B, on tooth that abfraction lesion was restored with composite resin, the stress value was reduced on the apex. Conclusion: In case of abfraction lesion was restored with composite resin, the stress was concentrated on the apical border of restored cavity regardless of marginal position. It was favorable to place crown margin on the enamel for restoring with metal ceramic crown.

Low-Cost CAP-type TDR Exploration Techniques for Leak Detection (누수탐지를 위한 저비용 CAP형 TDR 탐사기법)

  • Kim, Jin Man;Choi, Bong Hyuck;Cho, Jin Woo;Cho, Won Beom
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.4
    • /
    • pp.1479-1487
    • /
    • 2013
  • The river levee collapse and flood damages are dramatically increased due to the floods which caused by abnormal weather nowadays. The counterplan like TDR(Time Domain Reflectometry) river levee leaking exploration technique is needed to that levee failure causes of levee failure such as levee failure by penetration, piping, inadequate levee materials selection, poor compaction are almost 52% of the failure. This research practiced various comparing experiments of existing TDR(probe and tube types) and developing CAP type TDR to evaluate acrylic small CAP mould and low-cost TDR levee leaking monitoring system which was used probe type TDR. As the result, evaluated TDR system had 20cm critical exploration performance which was a leaking exploration performance, The functional ratio of TDR exploration sensitivity of dry density was sensitive more than 3 times than dry density, and weathered granite soil foundation water contents(w)-dielectric constant(${\epsilon}$) corelation formula was suggested to measure functional ratio on developing cap type TDR system.

Detection of Thermal Ratcheting Deformation for Cylindrical Shells by Ultrasonic Guided Wave (유도초음파를 이용한 원통형 쉘의 열 라체팅 변형 탐지)

  • Joo, Young-Sang;Lee, Hyeong-Yeon;Kim, Jong-Bum;Park, Chang-Gyu;Lee, Jae-Han
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.26 no.5
    • /
    • pp.297-305
    • /
    • 2006
  • The thermal ratcheting deformation at the reactor baffle and upper internal structure of the liquid metal reactor (LMR) can occur due to movement of the hot sodium free surface. In in-service inspection of reactor internals of LMR, a new inspection technique should be developed for the detection of the thermal ratcheting damage. In this study, an inspection technique using ultrasonic guided wave is proposed for the detection of the thermal ratcheting damage of cylindrical vessels. A 316L stainless steel cylindrical shell specimen has been prepared. The thermal ratchet structural tests were cyclically performed by heat-up up to $550^{\circ}C$ with steep temperature gradients along the axial direction after cool-down by cooling water. Ultrasonic guided wave propagation has been characterized by analysis of dispersion curve of the stainless steel plate. The zero-order antisymmetric $A_0$ guided wave has been selected as the optimal mode for detection of the ratcheting deformation. It is confirmed that the thermal ratcheting deformation can be detected by the measurement of transit time difference of circumferentially propagated $A_0$ guided waves.

Comparisons in Pattern Characteristics and Chlorophyll Contents of Major Foliages with Variegated Leaves (주요 반입 관엽식물의 무늬 특징과 엽록소 함량 비교)

  • Park, In Sook;Shin, Yong Gil;Oh, Wook;Kim, Kiu Weon
    • Horticultural Science & Technology
    • /
    • v.31 no.4
    • /
    • pp.447-456
    • /
    • 2013
  • This study was carried out for the establishment of theory and foundational data for breeding, on variegated foliage plants using for potted plants, based on examination and analysis for shape, color, and area ratio of variegated leaves and chlorophyll contents. Six families, 18 genus, and 54 species of variegated plants domestically distributed in Korea were used as the plant materials. Patterns based on chlorophyll-deficient part in variegated leaves were divided into 20 types, such as steps, border, collapsed border, sandy border, half, silk, stars, vein, firewood, border and firewood, center, entirety, leaf, irregular, net, watermelon, melon, and so on. There were 10 kinds of colors including dark green, red, dark red, reddish white, reddish yellow, white, silver, silvery white, yellowish white, and yellow. The ratio of variegated area was ranged from 5.8% to 100% and it was diverse depending on species or cultivar. The ratios by patterns were highest in entirety (98.6%) and relatively high in step (60.8%), whereas, low in boarder, star and firewood (33.6-36.4%), and relatively low in half and vein (43%). Chlorophyll content of variegated leaf was rather lower compared to normal plants and chlorophyll b tended to be higher in ratio of chlorophyll a to b. Particularly content of chlorophyll b in Stromanthe sanguinea 'Triostar', Dracaena fragrans 'Massangeana Compacta', D. reflexa 'Song of India', and Tradescantia spathacea was higher than chlorophyll a in comparison with that of normal plants.

A Study on the Selection of Cheongju City's Local Food (청주시 향토 음식 선정에 대한 연구)

  • Ann Yong-Geun
    • The Korean Journal of Food And Nutrition
    • /
    • v.19 no.2
    • /
    • pp.143-152
    • /
    • 2006
  • A survey was conducted of 1,390 citizens of Cheongju city', asking them to select 10 foods that they think are most suitable as local among 89 already- recognized local foods. The data were then analyzed by age, gender, and vocation. The results classified by sex showed that for males, first place was marsh snail soup (282), second, acorn jelly soup (174), third, bean noodle (164), and fourth, three-tiered pork and Haejang soup (158). In females, marsh snail was in first place (520), second, acorn jelly soup (322), third, bean noodle (272), fourth, three-tiered pork (271), and fifth, Haejang soup (262). Combining the results of males and females showed first place was marsh snail soup (802), second, acorn jelly soup (496), third, bean noodle (436), fourth, three-tiered pork (429), fifth, Haejang soup (420), sixth, wild plant mixture rice (323), seventh, Boshin broth (322), and eighth, minced chicken soup (321). The classification by vocation of males and females showed that fewer housewives chose three-tiered pork, while fewer clerks chose less wild plant mixture rice. Instead, housewives and clerks chose more Boshin broth and minced-chicken soup, which other males chose less. However, it is unreasonable to select wild plant mixture rice, bean noodle, or Boshin broth as the favorite local food since these can be eaten or collected only during the summer season.

Characterization of a Korean Traditional Porcine Breed Using Microsatellite Markers and the Establishment of an Individual Identification System (Microsatellite Marker를 이용한 한국재래돼지 집단의 품종특성 및 원산지 추적을 위한 개체식별체계 설정)

  • Kim, M.J.;Li, G.H.;Oh, J.D.;Cho, K.H.;Jeon, G.J.;Choi, B.H.;Lee, J.H.;Hong, Y.S.;Kong, H.S.;Lee, H.K.
    • Food Science of Animal Resources
    • /
    • v.27 no.2
    • /
    • pp.150-156
    • /
    • 2007
  • This study was conducted to analyze the genetic characteristics of Korean Native Pigs(KNP), and to establish an individual identification system comprising many microsatellite markers located on different pig autosomes. Genotype data from 13 microsatellites typed in 446 animals was used to determine the validation of a method of individual identification in 4 KNP. A total of 112 alleles of the 13 microsatellites were detected and average heterozygosities(polymorphic information content) ranged from 0.286(0.423) to 0.686(0.796) in this study. Comparing the pattern of allele frequency among the KNP, Yorkshire, Landrace and Duroc breeds, there was specific differentiation between populations at multi-allelic loci. The cumulative power of discrimination(CPD) was 99.999% by including 10 microsatellite loci for the individual identification system. The probability that two different individuals incidentally have same genotype was estimated to be $0.36{\times}10^{-9}$. The system employing these 10 markers therefore proved to be applicable to the individual identification of KNP.

Engineering Characteristics of Liquid Filler Using Marine Clay and In-situ Soil (해양점토와 현장토를 활용한 유동성 채움재의 공학적 특성)

  • Oh, Sewook;Bang, Seongtaek
    • Journal of the Korean GEO-environmental Society
    • /
    • v.21 no.9
    • /
    • pp.25-32
    • /
    • 2020
  • The underground utilities installed under the ground is an important civil engineering structure, such as water supply and sewerage pipes, underground power lines, various communication lines, and city gas pipes. Such underground utilities can be exposed to risk due to external factors such as concentrated rainfall and vehicle load, and it is important to select and construct an appropriate backfill material. Currently, a method mainly used is to fill the soil around the underground utilities and compact it. But it is difficult to compact the lower part of the buried pipe and the compaction efficiency decreases, reducing the stability of the underground utilities and causing various damages. In addition, there are disadvantages such as a decrease in ground strength due to disturbance of the ground, a complicated construction process, and construction costs increase because the construction period becomes longer, and civil complaints due to traffic restrictions. One way to solve this problem is to use a liquid filler. The liquid filler has advantages such as self-leveling ability, self-compaction, fluidity, artificial strength control, and low strength that can be re-excavated for maintenance. In this study, uniaxial compression strength test and fluidity test were performed to characterize the mixed soil using marine clay, stabilizer, and in-situ soil as backfill material. A freezing-thawing test was performed to understand the strength characteristics of the liquid filler by freezing, and in order to examine the effect of the filling materials on the corrosion of the underground pipe, an electrical resistivity test and a pH test were performed.

Investigation of Compressive Strength and Foaming Characteristics of Acid Anhydride Epoxy Foam by Foaming Agent (발포제에 따른 산무수물계 에폭시 폼의 압축강도 및 포밍특성 분석)

  • Kwon, Dong-Jun;Kim, Jong-Hyun;Park, Sung-Min;Kwon, Il-Jun;Park, Joung-Man
    • Composites Research
    • /
    • v.31 no.4
    • /
    • pp.133-138
    • /
    • 2018
  • Polymer foams were used to fill the void in the structure in addition to flame retardant and heat insulation. Polymer foams such as polyurethane, polyisocyanurate, poly(vinyl chloride), polyethylene terephthalate were used to weight lighting materials. In this study, epoxy foam was used to improve mechanical properties of polymer foam. Acid anhydride type hardener reacts with polyol. Using this phenomenon, if blowing agent was added into epoxy resin using acid anhydride type hardener, formation and compressive properties of epoxy foam was studied. Formation of polymer foam was compared with type of blowing agent and concentration of blowing agent via compressive test. As these results, optimized condition of epoxy foam was found and epoxy foam had better compressive property than other polymer foam.

Study on Traditional Multicolor, Dancheong in awareness by Dancheongjang (단청장(丹靑匠)이 인식하는 전통 단청 색상에 관한 조사 연구)

  • Jeong, Hye Young;Park, Ju Hyun;Go, In Hee;Kang, Yeong Seok
    • 보존과학연구
    • /
    • s.37
    • /
    • pp.27-41
    • /
    • 2016
  • This study surveyed color awareness and color systems according to pedigree(Ilseob, Woljoo, Hyegak, Manbong ect.) targeting Dancheongjang (craftsman) who has inherited Dancheong (traditional multicolor). From the survey of color awareness, standardized color system of 'traditional color' awareness by Dancheongjang is 'the color inherited by the master' and it was identified that there is the standardized color system in awareness and its standard is either same or similar to traditional Dancheong. Also, according to each period, colors of Dancheong have been changed, it was thought that change in color materials and preference had went with times. From eleven main colors of Dancheong, chromaticity materials which were preferred by Dancheongjang were analyzed by the faction of Dancheongjang and colors and it resulted in a variety of color ranges over all. In the case of Yangnok, Noerok, Juhong it showed a high deviation with a wide color range while there was a low deviation with a narrow color range in Hayeop, Daja, Seokganju. Through this study it was difficult to identify clear correlations and tendencies of color system by the faction of Dancheongjangs. This is judged to be a reflection of the subjective artistry of the members.

  • PDF