• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.280-289
• /
• 2018

Purpose: The purpose of this randomized clinical trial is to determine whether implant length and the crown-to-implant (C/I) ratio influence implant stability and peri-implant marginal bone loss (MBL). Materials and Methods: 46 patients with single tooth missing in the posterior molar region of the mandible were included in this study. 19 implants (CMI IS-III $active^{(R)}$ long implant) of 5.0 mm diameter and 10 mm length were installed for the control group, while 27 implants (CMI IS-III $active^{(R)}$ short implant) of 5.5 mm diameter and 6.6, 7.3 or 8.5 mm length were placed for the experimental group. Each implant was inserted and immediately loaded using the digitally pre-fabricated surgical template and provisional restoration. The CAD-CAM monolithic zirconia crown was fabricated at 3 months after the surgery as a definitive restoration. The ISQ value and the MBL was measured at 48 weeks after the surgery. The correlation between the C/I ratio, MBL, and secondary implant stability was analyzed. Results: Successful results in terms of ISQ and MBL were achieved with both groups. There was no significant difference between the groups in terms of ISQ values and MBL at 48 weeks after the surgery (P > 0.05). No significant correlation was found between the C/I ratio and secondary stability as well as the C/I ratio and the MBL (P > 0.05). Conclusion: The influence of C/I ratio in both groups was not shown on the stability nor the marginal bone loss in implants supporting single crown of the mandible. Short implant could be a preferable alternative option in the reduced bone height mandible under the limited condition despite its higher C/I ratio.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.86-109
• /
• 2009

Mireuksa Temple was founded during the reign of King Mu of Baekje(AD 600-641). The circumstance of the construction of this temple is documented in "Memorabilia of the Three Kingdoms (Samgukyusa)". The pagoda named stone pagoda at Mireuksaji temple stands outside the main sanctuary of the western area. The south and west sides of the stone pagoda have completely collapsed, leaving only the eastern facade of six of its levels intact. Through the recent discovery of sarira reliquary we can see that the erection of this pagoda was in 639. So owing to accumulation of excavation results about Baekje temple site and vigorous academic exchange, it is possible that architecture of western pagoda at Mireuksaji temple can be understood in connection with the architectural development of wooden pagoda from 6th to early 7th century in East Asia. So this study is on the consideration of building of this pagoda putting first structure of upper part and cross-shaped space in 1st floor. It was considered that the material characteristics as stone could be applied to the temple pagoda architecture of large scale. The results are as follows. First, it had been built in recognition that the outer and inner part of pagoda should be separated. As it is the expression of structural system in temple pagoda architecture of large scale at that time. In pagoda there was a self-erected structure and the members of outer part of it were constructed additionally. Second, in Mireuksaji stone pagoda there is central column with stones. With inner part of pagoda it can be regarded as mixed structural system that constitutes central contral column and inner structural part. And it could be a kind of middle step to more developed structure of whole as wooden pagodas in Japan. Third, as the sarira reliquary was in central column on the first floor, the cross-shaped space could be made. The formation of this space was so on the natural meaning of sarira that the concept as memorial service of graves could be apllied to the pagoda. The style of tomb in Baekje was expressed to the space of 1st floor in pagoda where Sarira had been mstalled. That was not only effective presentation of symbolic space but also easier method in the use of same material.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.160-169
• /
• 2019

Purpose: The purpose of this study was to evaluate the antimicrobial effects of a toothbrush with light-emitting diodes (LEDs) on periodontitis-associated dental biofilm attached to a zirconia surface by static and dynamic methods. Materials and Methods: Zirconia disks (12 mm diameter, 2.5 mm thickness) were inserted into a 24-well plate (static method) or inside a Center for Disease Control and Prevention (CDC) biofilm reactor (dynamic method) to form dental biofilms using Streptococcus gordonii and Fusobacterium nucleatum. The disks with biofilm were subdivided into five treatment groups-control, commercial photodynamic therapy (PDT), toothbrush alone (B), brush with LED (BL), and brush with LED+erythrosine (BLE). After treatment, the disks were agitated to detach the bacteria, and the resulting solutions were spread directly on selective agar. The number of viable bacteria and percentage of bacterial reduction were determined from colony counts. Scanning electron microscopy (SEM) was performed to visualize alterations in bacterial morphology. Results: No significant difference in biofilm formation was observed between dynamic and static methods. A significant difference was observed in the number of viable bacteria between the control and all experimental groups (P < 0.05). The percentage of bacterial reduction in the BLE group was significantly higher than in the other treated groups (P < 0.05). SEM revealed damaged bacterial cell walls in the PDT, BL, and BLE groups, but intact cell walls in the control and B groups. Conclusion: The findings suggest that an LED toothbrush with erythrosine is more effective than other treatments in reducing the viability of periodontitis-associated bacteria attached to zirconia in vitro.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.1
• /
• pp.100-119
• /
• 2016

The concept of "original form" and the principle of "maintaining the original form" take center stage in conservation, management, and promotion of the domestic heritage. Introduced in the 20th century, there were little discussion or deliberation about the concept of "original form" therefore it remains a vague and somewhat abstract notion subject to individual interpretation. Without a specified practical meaning, "maintaining the original form" became the fundamental principle for heritage conservation and management in the 1999 version of the Cultural Heritage Protection Act, engendering difficulties in applying the principle in practice. Conceived as an important first step toward resolving the issues stemming from the indistinct concept of "original form," this paper explores the process through which the concept was introduced to Korea and then established and developed as a legal principle for heritage conservation, management, and promotion. While the examination of the related documents and various cases shows that the development of the concept of "original form" has centered on specific periods and architectural styles, this essay explicates that the notion "original form" is commonly used as a term referring to the form at the earliest possible temporality. It also explains that this view emanates from perceiving heritages not as multivalent objects, but as a material object that exclusively carries aesthetic and, more importantly, historical value, and that comes from the history awareness of the times. This essay suggests that the concept "original form" should be reestablished with full consideration of the diverse values of heritage and diverse forms through which heritage can be expressed. After reviewing the feasibility and practicality of the concept a set of concrete guidelines should be presented for application in practice.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.203-210
• /
• 2019

Purpose: The purpose of this study was to verify the effect of the abutment superimposition process on the final virtual model in the scanning process of single and 3-units bridge model using a dental model scanner. Materials and methods: A gypsum model for single and 3-unit bridges was manufactured for evaluating. And working casts with removable dies were made using Pindex system. A dental model scanner (3Shape E1 scanner) was used to obtain CAD reference model (CRM) and CAD test model (CTM). The CRM was scanned without removing after dividing the abutments in the working cast. Then, CTM was scanned with separated from the divided abutments and superimposed on the CRM (n=20). Finally, three-dimensional analysis software (Geomagic control X) was used to analyze the root mean square (RMS) and Mann-Whitney U test was used for statistical analysis (${\alpha}=.05$). Results: The RMS mean abutment for single full crown preparation was $10.93{\mu}m$ and the RMS average abutment for 3 unit bridge preparation was $6.9{\mu}m$. The RMS mean of the two groups showed statistically significant differences (P<.001). In addition, errors of positive and negative of two groups averaged $9.83{\mu}m$, $-6.79{\mu}m$ and 3-units bridge abutment $6.22{\mu}m$, $-3.3{\mu}m$, respectively. The mean values of the errors of positive and negative of two groups were all statistically significantly lower in 3-unit bridge abutments (P<.001). Conclusion: Although the number of abutments increased during the scan process of the working cast with removable dies, the error due to the superimposition of abutments did not increase. There was also a significantly higher error in single abutments, but within the range of clinically acceptable scan accuracy.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.424-433
• /
• 2018

Watermelon (Citrullus lanatus) is an economically important vegetable crop all over the world, which has functional compounds such as lycopene and citrulline. Gummy stem blight caused by Didymella bryoniae is one of the most devastative diseases in watermelon. Single nucleotide polymorphisms (SNPs), which are genetic variations occurring between individuals with respect to a single base, were often used to construct genetic linkage maps and develop molecular markers linked to a variety of horticultural traits and resistance to several diseases. In this study, we developed high-resolution melting (HRM) markers based on SNPs generated from NGS resequencing of two parents in watermelon. Plant materials were C. lanatus '920533' (female and susceptible parent), C. amarus 'PI 189225' (male and resistant parent), and their $F_1$ and $F_2$ progenies. A total of 13.6 Gbp ('920533') and 13.1 Gbp ('PI 189225') of genomic sequences were obtained using NGS analysis. A total of 6.09 million SNPs between '920533' and 'PI 189225' were detected, and 354,860 SNPs were identified as potential HRM primer sets. From these, a total of 330 primer sets for HRM analysis were designed. As a result, a total of 61 HRM markers that have polymorphic melting curves were developed. These HRM markers can be used for the construction of SNP-based linkage maps and for the analysis of quantitative trait loci (QTLs) related to gummy stem blight resistance.

• Korean Journal of Environment and Ecology
• /
• v.35 no.4
• /
• pp.336-346
• /
• 2021

The enforcement of the Nagoya Protocol, which regulates the acquisition and use of genetic sources, an essential material for biotechnology R&D, has imposed a burden for additional documentation works to researchers. In the past, countries regarded genetic resources as a common human heritage and thus allowed researchers to use them freely. However, they can no longer afford the luxury of such freedom now since many countries are introducing new laws and regulations on the acquisition and use of the resources as the Nagoya Protocol recognizes the exclusive ownership of genetic resources. Therefore, Korea, which is highly dependent on foreign genetic resources, needs a more systematic response. This paper aims to review the key contents of the Nagoya Protocol to raise awareness among domestic and foreign genetic resource users, including researchers of environment and ecology and present the overall structure, and flow of acquisition, access, and benefit sharing (ABS) for the use of foreign genetic resources to help them respond appropriately to the new landscape. The researchers' efforts and support at the national level are necessary at the same time to appropriately respond to the Nagoya Protocol. First, the researchers must understand the overall framework and the specific response in each stage under the Nagoya Protocol scheme. It is necessary to respond to the ABS procedure of the resource provider country from accessing genetic resources to sharing benefits resulting from it. In that regard, the Nagoya Protocol has imposed more restrictions on research activities and raised the burden outside of research. The current trend of recognizing the country's sovereign rights over genetic resources is likely to continue and widespread worldwide as resource-rich countries are expected to continue protecting their resources. Therefore, our study will help environmental ecology researchers understand ABS and conduct research under the Nagoya Protocol and legal obligations of resource provider countries step by step, from access to benefit sharing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.261-270
• /
• 2021

Purpose. The aim of this study was (1) to compare the reverse engineering technique with other existing measurement methods and (2) to analyze the effect of implant angulations and impression coping types on implant impression accuracy with reverse engineering technique. Materials and methods. Three different master models were fabricated and the distance between the two implant center points in parallel master model was measured with different three methods; digital caliper measurement (Group DC), optical measuring (Group OM), and reverse engineering technique (Group RE). The 90 experimental models were fabricated with three types of impression copings for the three different implant angulation and the angular and distance error rate were calculated. One-way ANOVA was used for comparison among the evaluation methods (P < .05). The error rates of experimental groups were analyzed by two-way ANOVA (P < .05). Results. While there was significant difference between Group DC and RE (P < .05), Group OM had no significant difference compared with other groups (P > .05). The standard deviations in reverse engineering were much lower than those of digital caliper and optical measurement. Hybrid groups had no significant difference from the pick-up groups in distance error rates (P > .05). Conclusion. The reverse engineering technique demonstrated its potential as an evaluation technique of 3D accuracy of impression techniques.

• Journal of Life Science
• /
• v.31 no.3
• /
• pp.287-297
• /
• 2021

Cornus officinalis Siebold & Zucc. is traditionally used as an edible and medicinal plant in many countries in East Asia. Previous studies have shown the pharmacological potential of extracts and components of C. officinalis, but comparative analysis of the composition of the leaf, stem, and fruit extracts has been insufficient to date. In the present study, the content of active antioxidant and anti-inflammatory ingredients was verified in different C. officinalis parts (under-ripe sansuyu, ripe sansuyu, seed, leaf, stem, and dried sansuyu). One active component, morroniside, was high in fruit (under-ripe and ripe sansuyu), while loganin was high in fruit (under-ripe sansuyu) and cornin was high in seeds. Total polyphenol contents were highest in fruit (ripe sansuyu) and flavonoids were highest in leaves. DPPH radical scavenging activity was highest in leaves, followed by seeds and then ripe sansuyu extract. The anti-inflammatory efficacy of leaf extracts of C. officinalis (LCO) was further investigated by measuring their effects on levels of nitric oxide (NO) and the pro-inflammatory cytokines interleukin (IL)-1β and IL-6 in RAW 264.7 macrophages. Non-cytotoxic concentrations of LCO effectively decreased the lipopolysaccharide (LPS)-induced expression of inducible NO synthase, resulting in decreased NO production. LCO also significantly suppressed LPS-induced production and expression of IL-1β and IL-6. Taken together, the present findings suggest that C. officinalis leaves have potential as natural materials for the development of antioxidant and anti-inflammatory agents.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.250-273
• /
• 2020

The three-story stone pagodas in Hyeon-ri and Hwacheon-ri,Yeongyang Gyeongsangbuk-do are stone pagodas that exhibit the typical style of Unified Silla. The two pagodas are believed to have been built in the mid- and late 9th centuries at the latest, considering the style of the three-story roof stone on top of the double-tier base. This is also confirmed by the reliefs carved at the base and the first-story of the pagoda. The Four Heavenly Kings and the Twelve Zodiacal Animal Deities were first combined in the late 8th century in the stone pagoda at the Wonwonsa Temple Site, and the Eight Classes of Divine Beings was also the most popular carved pagoda reliefs in the 9th century. However, the two Yeongyang stone pagodas are characterized by a combination of the Four Heavenly Kings (1st story), the Eight Classes (top base), and the Twelve Zodiacal Animals (lower base), and the stone used for the pagoda consists of sedimentary rocks of the sandstone family, which comprise most of the geological strata in the Yeongyang area, rather than ordinary granite. The new combinations of the three types of guardian deities and the Eight Classes changed from seated to standing poses is interpreted as an attempt to enhance the Buddhist faith and cultural status of the Yeongyang area, along with the fact that the stone pagoda was built using local natural materials. The Eight Classes of the Yeongyang stone pagoda does not follow the two types of arrangement of the pagodas with the Eight Classes, but some of the deities have been relocated to a new location. Composed of AsuraGandharva on the east side, Naga-Mahoraga on the south, Deva-Garuda on the west, and Kimnara-Yaksa on the north, this form can be classified as a unique 'third layout of the Eight Classes' in the Yeongyang area. Such changes in the shape and posture of the reliefs reflect a new perception of the pagodas. The reason why the Gandharva and Yaksa statues were carved on the east and north sides, respectively, was because they were deemed subordinate to the Four Heavenly Kings, and the fact that the Naga and the Mahoraga were carved on the south side was presumed to have influenced the geographical location of the two pagodas on the northern side of Banbyeoncheon Stream. The Hyeon-ri and Hwacheon-ri three-story stone pagodas inherited the tradition of typical Unified Silla-period pagodas, while also bearing their own new regional characteristics.