• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.210-211
• /
• 2021

This study introduces and demonstrates the application of an experimental regime for anti-seismic performance evaluation of waterproofing materials to used for concrete pile walls. Concrete pile walls are subject to high degree of seismic load, and the occurring stress can affect the waterproofing integrity of the structure, but there is currently no existing methodology or standard for evaluating this property of waterproofing materials. To propose and conduct this evaluation, a new testing apparatus was designed and manufactured intended to be able to test an installed waterproofing material's seismic resistance performance.

• 보존과학회지
• /
• 제36권6호
• /
• pp.519-532
• /
• 2020

본 연구는 칠장사 오불회 괘불탱의 과학적 조사 결과를 종합하여 화기에 기록된 채색 재료에 대해 해석하고자 하였다. 연구결과 진분은 연백, 주홍은 진사, 황단은 연단, 황금은 금, 석자황은 석황으로 확인되었다. 녹색의 당하엽과 삼록은 copper trihydroxychloride, 청색의 대청과 중청은 석청으로 확인되며 이들의 입도에 따라 색상의 변화를 준 것으로 보인다. 연지와 청화는 각각 적색과 청색의 유기염료로서 청색은 쪽의 존재가 확인되나 연지는 고문헌과 한자의 명칭에 차이를 보여 통시적으로 사용된 연지인지는 불분명하다. 수토황은 괘불탱에서 그 존재가 확인되지 않았으나 황색 계열의 재료로 보이며 토양추출물이나 등황일 가능성이 높다.

• 세라미스트
• /
• 제21권4호
• /
• pp.378-387
• /
• 2018

The optimal fabrication conditions for $Gd_{0.1}Ce_{0.9}O_{2-{\delta}}$(GDC) buffer layer and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF) cathode on 1mol% $CeO_2-10mol%\;Sc_2O_3$ stabilized $ZrO_2$ (CeScSZ) electrolyte were investigated for application of IT-SOFCs. GDC buffer layer was used in order to prevent undesired chemical reactions between LSCF and CeScSZ. These experiments were carried out with $5{\times}5cm^2$ anode supported unit cells to investigate the tendencies of electrochemical performance, Microstructure development and interface reaction between LSCF/GDC/CeScSZ along with the variations of GDC buffer layer thickness, sintering temperatures of GDC and LSCF were checked, respectively. Electrochemical performance was analyzed by DC current-voltage measurement and AC impedance spectroscopy. Microstructure and interface reaction were investigated by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Although the interfacial reaction between these materials could not be perfectly inhibited, We found that the cell, in which $6{\mu}m$ GDC interlayer sintered at $1200^{\circ}C$ and LSCF sintered at $1000^{\circ}C$ were applied, showed good interfacial adhesions and effective suppression of Sr, thereby resulting in fairly good performance with power density of $0.71W/cm^2$ at $800^{\circ}C$ and 0.7V.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.15-21
• /
• 2011

복합재료가 건설 분야에서 보다 광범위하게 이용되기 위해서는 일반 기술자에게 이론을 쉽게 하기 위한 연구와 시험을 통한 데이터의 축적이 필요하다. 따라서 본 논문에서는 복합재료인 FRP 바닥판 부재의 따른 정적 및 피로성능을 평가하고 향후 FRP 바닥판의 해석 및 설계기준의 기초 자료를 제공하여 복합재료의 구조재 활용을 위한 기반기술을 제공하고자 하였다. 정적시험 결과 섬유방향 시험체가 섬유직각방향 시험체보다 큰 강성을 갖고 있으며 데이터 값이 훨씬 수렴되는 경향을 보이는바 이는 파괴과정에서 기지 배열에 따른 구조 특성으로 보다 안정적인 거동을 보이는 것을 알 수 있었다. 피로시험 결과 섬유방향 시험체는 섬유직각방향 시험체가 초기에 균열이 발생하는 것과 달리 시험체의 반복횟수가 증가하면서 파괴 직전에 균열을 확인할 수 있었으며, 접착면이 떨어지는 양상을 보였다.

• 대한금속재료학회지
• /
• 제48권10호
• /
• pp.942-950
• /
• 2010

The microstructure and mechanical properties of a Cu-Fe-P copper alloy processed by differential speed rolling (DSR) were investigated in detail. The copper alloy, with a thickness of 3 mm, was rolled to 50% reduction at ambient temperature without lubrication with a differential speed ratio of 2.0:1 and then annealed for 0.5h at various temperatures ranging from 100 to $800^{\circ}C$. Conventional rolling was performed under the same rolling conditions for comparison. The shear strain introduced by the conventional rolling process showed positive values at the positions of the upper roll side and negative values at the positions of the lower roll side. However, the result was zero or positive values at all positions for samples rolled by DSR. The effects of DSR on the microstructure and mechanical properties of the as-rolled and subsequently annealed samples are discussed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.32-36
• /
• 2006

Simplification of the buffer architecture in the fabrication of coated conductors is required because the deposition of multi-layers leads to a longer production time and a higher cost of coated conductors. In this study, a single layered buffer deposition of $CeO_2$ for low cost coated conductors has been tried using thermal evaporation technique. l00nm-thick $CeO_2$ layers deposited by thermal evaporation were found to act as a diffusion layer. $0.4{\mu}m$-thick SmBCO superconducting layers were deposited by thermal co-evaporation on the $CeO_2$ buffered Ni-W substrate. Critical current of $55.4 A/cm^2$ was obtained for the SmBCO coated conductors.

• 소성∙가공
• /
• 제33권3호
• /
• pp.208-213
• /
• 2024

Ni-based superalloys have exceptional performance in high-temperature strength, corrosion resistance, etc, and it has been widely used in various applications that require corrosion resistance at high-temperature operations. However, the relatively expensive cost of the Ni-based superalloys is one of the major hurdles. The corrosion-resisted alloy(CRA) clad materials can be a cost-effective solution. In this study, finite element analysis of the hot rolling process for manufacturing of the Alloy 625/API X65 steel CRA clad plates is conducted. The stress-strain curves of the two materials are measured in compressive tests for various temperature and strain rate conditions, using the Gleeble tester. Then, strain hardening behavior is modeled following the modified Johnson-Cook model. Finite element analysis of the hot rolled cladding process is performed using this strain rate and temperature dependent hardening model. Finally, the thickness ratio of the CRA and base material is predicted and compared with experimental values.

• 기술혁신학회지
• /
• 제8권2호
• /
• pp.732-756
• /
• 2005

This paper attempts to find the sources of materials technology innovation and to analyze the relationships between the sources and materials technology innovation. Starting from the traditional hypothesis on the innovation sources (e.g. technology-push, demand-pull and user-supplier), materials scientific knowledges, materials processing technologies and users' needs are found as three main sources of innovation in materials technology. There are not only close interactions between the sources and materials innovation, but also the interactions among the sources of innovations play important roles for materials technology innovation. This paper discusses the characteristics of interactions between sources of innovation in materials technology. This study on the sources and interactions among sources may provide important information for policymaking in materials technology

• 한국고분자학회지:고분자과학과기술
• /
• 제20권5호
• /
• pp.472-480
• /
• 2009

반도체 미세화가 진행되면서, 이를 성공하기 위해 많은 재료물질이 요구되어진다. 이 중 미세 패턴의 붕괴를 막고 깊은 패턴을 새기기 위해서 필요한 hardmask 재료가 있다. Hardmask는 유기실리콘 재료와 탄소 함량이 높은 재료로 주로 구성되고, 이들은 193 nm 빛과 관련된 광학적 특성을 가지면서 특정 플라즈마에 대한 에치 저항성을 가지는 물성을 가지도록 디자인/합성/배합되어져 있다. 또한, 접합되는 다른 박막과의 compatibility및 용매에 대한 solubility 등이 적절해야만 나노미터 수준의 defect 없는 패턴을 구현할 수 있다.

• 대한금속재료학회지
• /
• 제46권3호
• /
• pp.150-158
• /
• 2008

The temperature distribution of high speed tool steel rod has been studied during high speed hot rolling procedures. The tool steel rod shows severe temperature gradient during rolling procedures and the temperature at the center of rod are much higher than that at the surface of rod. This temperature gradient accumulated after every rolling procedure and the center of rolled rod could be remelt in some procedures to cause inside defects. In this study, the temperature distribution was simulated using finite element method and the processing parameters such as rolling speed, cooling condition, have been discussed to prevent the temperature increases at the center of rod.