• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1926-1932
• /
• 2001

In this second part of the paper, the automatic mesh generation and remeshing algorithm using bubble packing method is applied to the nonlinear problem. The remeshing/refinement procedure is necessary in the large deformation process especially because the mesh distortion deteriorates the convergence and accuracy. To perform the nonliear analysis, the transfer of state variables such as displacement and strain is added to the algorithm of Part 1. The equilibrium equation based on total Lagrangian formulation and elasto-viscoplastic model is used. For the numerical experiment, the upsetting process including the contact constraint condition is analyzed by two refinement criteria. And from the result, it is addressed that the present algorithm can generate the refined meshes easily at the largely deformed area with high error.

• Journal of Korea Water Resources Association
• /
• v.43 no.1
• /
• pp.105-117
• /
• 2010

This paper presents a new and simple technique to perform MUSCL reconstruction for solving 2D shallow water equations. The modified MUSCL scheme uses weighted area ratio to apply non-uniform grid in stead of the previous method that equally distributed the difference of conservation variables to each interface. The suggested method can physically reconstruct conservation variables in case of uniform grid as well as non-uniform grid. In this study, Unsplit scheme applicable to unstructured grid is used and efficient slope limiter of TVD scheme is used to control numerical oscillation which can be occurred in modified MUSCL scheme. For accurate and efficient treatment of bed slope term, the modified MUSCL scheme is coupled with the surface gradient method. The finite volume model applied to suggested scheme is verified through a comparison between numerical solution and laboratory measurements data such as the simulations of isolated building test case and Bellos's dam break test case.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.534-544
• /
• 1997

The permittivity distribution of a two-dimensional high-contrast object with large size, which leads to the global minimum of cost function, is reconstructed by iteratively using the hybrid algorithm of Levenberg-magquardt algorithm(LMA) plus Genetic Algorithm(GA). The scattered fields calculated in a cost function are expanded in angular spectral modes, of which only effective propagating modes are used. The definition of cost function based on the effective propagating modes enables us to formulate the minimum number of incident waves for the reconstruction of object. It is numerically shown that LMA has an advantage of fast convergence but can't reconstruct a high-contrast object with large size and GA can reconstruct a high-contrast object with large size but has an disadvantage of slow convergence, whereas an inverse scattering technique using the hybrid algorithm adopts only advantages of LMA and GA.

• Journal of Korea Game Society
• /
• v.6 no.2
• /
• pp.45-50
• /
• 2006

In order to generate a photo-realistic synthesized image, we should reconstruct light environment by 3D analysis of scene. This paper presents a novel method for identifying the positions and characteristics of the lights-the global and local lights-in the real image, which are used to illuminate the synthetic objects. First, we generate High Dynamic Range(HDR) radiance map from omni-directional images taken by a digital camera with a fisheye lens. Then, the positions of the camera and light sources in the scene are identified automatically from the correspondences between images without a priori camera calibration. Types of the light sources are classified according to whether they illuminate the whole scene, and then we reconstruct 3D illumination environment. Experimental results showed that the proposed method with distributed ray tracing makes it possible to achieve photo-realistic image synthesis. It is expected that animators and lighting experts for the film and animation industry would benefit highly from it.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.487-499
• /
• 2009

The postprocessing technology has been advanced diversely to accommodate the tendency of increasingly refined and complicated practices of finite element modeling in pace with enhanced capabilities of computers and improved algorithm of equation solvers. As a result of such progresses in both hardware and software, it became practically meaningful to inspect and analyze the elasto-plastic behavior using the intermediate results from the increasing number of incremental and iterative processes. This paper is concerned about the new methods of postprocessing with computer graphic visualization of elasto-plastic behavior on the basis of the theoretically reorganized analysis results. This paper proposes a new method of rendering the plastic zone, and new approaches of analyzing and interpreting the elasto-plastic behavior using the graphical information visualized in the form of the yield surface and the stress path, or in the form of the Mohr circles and the failure envelope.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.4
• /
• pp.223-231
• /
• 2013

This paper presents a time-domain Gauss-Newton full-waveform inversion method for the material profile reconstruction in heterogeneous semi-infinite solid media. To implement the inverse problem in a finite computational domain, perfectly-matchedlayers( PMLs) are introduced as wave-absorbing boundaries within which the domain's wave velocity profile is to be reconstructed. The inverse problem is formulated in a partial-differential-equations(PDE)-constrained optimization framework, where a least-squares misfit between measured and calculated surface responses is minimized under the constraint of PML-endowed wave equations. A Gauss-Newton-Krylov optimization algorithm is utilized to iteratively update the unknown wave velocity profile with the aid of a specialized regularization scheme. Through a series of one-dimensional examples, the solution of the Gauss-Newton inversion was close enough to the target profile, and showed superior convergence behavior with reduced wall-clock time of implementation compared to a conventional inversion using Fletcher-Reeves optimization algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.285-299
• /
• 1993

The objective of the present study is to analyze material flow in the metal forming processes by using computer simulation and experiment with model material, plasticine. A UBET program is developed to analyze the bulk flow behaviour of various metal forming problems. The elemental strain-hardening effect is considered in an incremental manner and the element system is automatically regenerated at every deforming step in the program. The material flow behavior in closed-die forging process with rib-web type cavity are analyzed by UBET and elastic-plastic finite element method, and verified by experiments with plasticine. There were good agreements between simulation and experiment. The effect of corner rounding on material flow behavior is investigated in the analysis of backward extrusion with square die. Flat punch indentation process is simulated by UBET, and the results are compared with that of elastic-plastic finite element method.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.503-512
• /
• 2014

In this paper, various tire blow-out force experiment data were collected and analyzed to obtain approximate values of related coefficients such as rolling resistance, self-aligning torque, cornering stiffness, and radial stiffness for the analysis of the motion of vehicles with tire blow-outs. These coefficients related to tire blow-outs were input into a vehicle accident analysis program to simulate and examine the effects of tire blow-outs. Various configurations and velocities of vehicle collisions without tire blow-outs were also used as reference to establish collision events of vehicle collisions with tire blow-outs. For the events, the simulation analysis was performed and collision characteristics were obtained. Consideration of tire blow-outs or damages suggested in this study will greatly contribute to more reliable vehicle accident reconstructions.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.138-141
• /
• 2003

최근 어패럴 캐드 시스템을 지원하기 위해 3차원 레이저 스캐너로부터 획득된 데이터를 해석적 곡면으로 재구성하는 연구가 활발히 진행되고 있다. 이를 위해 역공학(reverse engineering)을 이용하여 인체를 모델링 하는 시도는 패션, 의료 둥의 분야에서 그 수요가 증가하고 있지만, 그 대상이 되는 인체가 매우 불규칙하기 때문에 기하학, 해석학적으로 접근하기가 어렵고, 시도 또한 미비한 실정이다. (중략)

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.249-251
• /
• 2006

현재 전력계통해석은 단인 주파수의 정상 및 과도상태 해석용 페이서 개념의 해석 툴을 사용하고 있다. 이는 뇌서지, 개폐서지, TRV, 병렬회선 공진 등 비선형적 계통현상분석 시 한계를 보이게 된다. 더욱이 계통이 거대화, 복잡화 됨에 따라 비선형적 과도현상 발생 빈도가 더욱 증가하여 과도현상 해석의 필요성이 점점 증가하고 있는 실정이다. 전력계통 해석 소프트웨어 중 EMTP는 비선형적 요인에 의한 고장발생 시 원인분석 해석 기술을 제공하고 있다. EMTP-RV는 EMTP를 GUI 방식으로 재구성한 툴로서 더욱 사용하기 편한 장점을 지니고 있다. 따라서, 본 논문에서는 여러 과도현상 중 개폐서지에 대하여 EMTP-RV를 이용한 분석 기법을 나타내었다. 여러 개폐서지 발생 원인을 EMTP-RV를 이용하여 모델링 하였으며, 모의 결과를 분석하였다.