• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.82-92
• /
• 2008

Recently, many digital signal processing(DSP) applications such as H.264, CDMA and MP3 are predominant tasks for modern high-performance portable devices. These applications are generally computation-intensive, and therefore, require quite complicated accelerator units to improve performance. Designing such specialized, yet fixed DSP accelerators takes lots of effort. Therefore, DSPs with multiple accelerators often have a very poor time-to-market and an unacceptable area overhead. To avoid such long time-to-market and high-area overhead, dynamically reconfigurable DSP architectures have attracted a lot of attention lately. Dynamically reconfigurable DSPs typically employ a multi-functional DSP accelerator which executes similar, yet different multiple kinds of computations for DSP applications. With this type of dynamically reconfigurable DSP accelerators, the time to market reduces significantly. However, integrating multiple functionalities into a single IP often results in excessive control and area overhead. Therefore, delay and power consumption often turn out to be quite excessive. In this thesis, to reduce power consumption of dynamically reconfigurable IPs, we propose a novel fine-grained clock gating scheme, and to reduce size of dynamically reconfigurable IPs, we propose a compact multiplier-less multiplication unit where shifters and adders carry out constant multiplications.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1693-1696
• /
• 2003

본 논문에서는 다양한 서비스를 지원하면서도 비용 효율적인 구조로 구현이 가능하게 하는 유연 멀티미디어 단말구조를 제시하고 있다. 제시된 단말 구조는 단말에 시스템 프로세서와 범용의 DSP 프로세서를 사용하고 실시간의 복잡한 연산을 필요로 하는 멀티미디어 응용프로그램을 DSP에서 수행하도록 하였다. DSP application은 알고리듬 표준화기법에 의한 프로그래밍 구조를 적용하여 단말의 재구성이 가능하도록 하였다. 본 논문에서는 이와 같이 설계된 단말의 재구성과 동작을 검증하기 위하여 Dolby AC-3 코더를 구현하고 그 동작을 시험하여 보았다.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.66-73
• /
• 2007

SDR technology is a fundamental wireless access technology that combines and accommodates multiple wireless communication standards in one transceiver system through just modifying software using modular communication platforms without any hardware modifications for RF and IF signal processing on the basis of high performance DSP devices. Various communication systems that are designed under diverse and complex network environments require the communication platforms on the basis of SDR supporting reorganization to guarantee simple and fast communication interfaces among the respective wireless networks. This paper introduces a main idea on the implementation of platform on the basis of SDR and a communication platform is designed for experiments that is composed of a DSP board with TMS320C6713 CPU, a FPGA board processing IF signals, and a module with RF transceiver processing wireless LAN frequency bandwidth. Various modulation schemes(BPSK, QPSK, and 16QAM) used in communication systems are applied and tested on the designed platform and the test results shows that it is possible to design a reconfigurable communication terminal platform.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.39-48
• /
• 2005

This paper proposes a reconfigurable coprocessor for communication systems, which can perform high speed computations and various functions. The proposed reconfigurable coprocessor can easily implement communication operations, such as scrambling, interleaving, convolutional encoding, Viterbi decoding, FFT, etc. The proposed architecture has been modeled by VHDL and synthesized using the SEC 0.18$\mu$m standard cell library. The gate count is about 35,000 gates and the critical path is 3.84ns. The proposed coprocessor can reduced about $33\%$ for FFT operations and complex MAC, $37\%$ for Viterbi operations, and $48\%\~84\%$ for scrambling and convolutional encoding for the IEEE 802.11a WLAN standard compared with existing DSPs. The proposed coprocessor shows Performance improvements compared with existing DSP chips for communication algorithms.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.409-411
• /
• 2005

본 논문에서는 HD급 멀티미디어 streaming을 처리할 수 있는 DSP 플랫폼을 개발하였다. DSP 플랫폼은 Tl사의 C6400계열 DSP를 사용하였고 다채널의 오디오와 HD급 화질의 비디오_ 데이터를 처리할 수 있다. DSP가 decoder의 기능을 부담함으로써 하드웨어의 재구성이 용이하며 코덱을 다운로드하기 때문에 유연한 멀티미디어 컨텐츠의 재생이 가능하다. 개발한 DSP 플랫폼을 호스트 PC에 설치하여 PC로부터 DSP Configuration 파일과 멀티미디어 스트리밍 데이터를 전송받는 구조를 가진다. 소프트웨어는 실시간으로 demux를 실행하여 오디와 비디오_ 데이터를 분리하석 DSP 플랫폼의 외부메모리에 저장하고 동시에 비디오와 오디오의 디코딩을 실행한다. 오디오와 비디오 데이터의 버퍼 언더런/오버런을 극할 수 있는 buffer control 기법을 적용하였다. 호스트 PC에서 DSP 플랫폼으로의 스트리밍을 하기 위하여 Open Architecture 기반의 Windows OS에서 스트리밍 서비스 프로그램을 구현 하였다. 마지막으로 MPEG-2 video MP@ML인 비디오 코덱과 5.1ch 48kHz AC3인 오디오 코덱으 구성된 streaming 데이터를 사용하여 DSP 플랫폼을 검증하였다.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.178-178
• /
• 2001

목적： 본 연구에서는 초당 $10^{9}$ 부동점 연산이 가능한 Texas Instrument사의 TMS320C6701 DSP를 이용하여 연속적으로 변하는 경사자계를 real-time으로 계산하여 후, 4 채널의 phase array 코일을 이용하여 영상을 얻은 후 빠른 재구성을 통하여 영상을 확인할 수 있는 spectrometer를 개발하였다. 대상 및 방법： 실시간 구현을 위하여 DSP 보드에 Texas Instruments(Tl)사의 TMS320C6701을 장착하였다. Transmitter, receiver, 그리고 gradient를 담당하는 DSP 보드들과 이들과 연결되어 rf modulation, gradient waveform을 만드는 analog board와 phased array coil을 위한 4 채널까지 측정이 가능한 receiver board로 구성하였다. Gradient 보드의 경우 각 경사자계의 채널(Gx, Gy, Gz)의 sampling points를 real-time으로 각각 계산함으로써 blipped-EPI 뿐만 아니라, 경사자계 파형이 연속적으로 변화하는 spiral-EPI의 실험도 가능하게 하였다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.663-664
• /
• 2006

This paper presents a reconfigurable digital signal processing(rDSP) architecture that is effective for implementing adaptive digital signal processing in the applications of smart health care system. This rDSP architecture employs an evolution capability of FIR filters using genetic algorithm. Parallel genetic algorithm based rDSP architecture evolves FIR filters to explore optimal configuration of filter combination, associated parameters, and structure of feature space adaptively to noisy environments for an adaptive signal processing. The proposed DSP architecture is implemented using Xilinx Virtex4 FPGA device and SMIC 0.18um CMOS Technology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.186-189
• /
• 2019

The technique named CORD is an algorithm that optimizes resources of Data Service Platform(DSP) in real time, and it has been developed for enhancing operability of DSP of Korean e-Navigation Project performed by Hanwha Systems and Ministry of Oceans and Fisheries(MOF) since 2016. It plays a critical role to recognize the state of DSP in early time and handling problems immediately when it occurs logical, physical error in order to make DSP steady state condition, which has something in common with maximizing operability of DSP and seamless maritime service to various ships in the sea. Therefore, as developing a noble technique that makes DSP steady state by diagnosing resource and operation status of DSP as well as by reconfiguring service queue optimally in real time, DSP can have shorter response time and higher chance of providing proper maritime service to ships in voyage.

• Investigative Magnetic Resonance Imaging
• /
• v.7 no.1
• /
• pp.12-21
• /
• 2003

Purpose : In order to overcome limitations in the existing conventional spectrometer, a new spectrometer with advanced functionalities is designed and implemented. Materials and Methods : We designed a spectrometer using the TMS320C6701 DSP capable of 1 giga floating point operations per second (GFLOPS). The spectrometer can generate continuously varying complicate gradient waveforms by real-time calculation, and select image plane interactively. The designed spectrometer is composed of two parts: one is DSP-based digital control part, and the other is analog part generating gradient and RF waveforms, and performing demodulation of the received RF signal. Each recover board can measure 4 channel FID signals simultaneously for parallel imaging, and provides fast reconstruction using the high speed DSP. Results : The developed spectrometer was installed on a 1.5 Tesla whole body MRI system, and performance was tested by various methods. The accurate phase control required in digital modulation and demodulation was tested, and multi-channel acquisition was examined with phase-array coil imaging. Superior image quality is obtained by the developed spectrometer compared to existing commercial spectrometer especially in the fast spin echo images. Conclusion : Interactive control of the selection planes and real-time generation of gradient waveforms are important functions required for advanced imaging such as spiral scan cardiac imaging. Multi-channel acquisition is also highly demanding for parallel imaging. In this paper a spectrometer having such functionalities is designed and developed using the TMS320C6701 DSP having 1 GFLOPS computational power. Accurate phase control was achieved by the digital modulation and demodulation techniques. Superior image qualities are obtained by the developed spectrometer for various imaging techniques including FSE, GE, and angiography compared to those obtained by the existing commercial spectrometer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1147-1156
• /
• 2001

In this paper, a new design architecture of radar signal processor in real time is proposed. It has been designed and implemented under the consideration to minimize the inter-processor communication overhead and to maintain the coherence in Doppler pulse domain and in range domain. Its structure can be easily reconfigured and reprogrammed in accordance with an addition of function algorithm or a modification of operational scenario. As we designed a task configuration for parallel processing from measures of computation time for function algorithms and transmission time for results by signal processing, data exchange between processors for performing of function algorithms could be fully removed. Morocco-2 board equipped ADSP-21060 processor of Analog Devices inc. and APEX-3.2 developed for SHARC DSP were used to construct the radar signal processor.