• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.7-14
• /
• 2012

This paper is to develop analytical techniques of flammable liquids which have been used for accelerating fire in accidental fires and arsons. We tested the temperature distribution of ceiling, fire patterns on the floor, and existence of flammable liquids and a check with GC/MS about flammable liquids comparing with papers, newspapers, and clothing. Research findings are as follows. The temperature of ceiling is influenced by flame. So gasoline and thinner was observed that combustible materials would be burned by flame. The fire patten on the floor was observed that flammable liquids had specialized pattern comparing combustible materials. When combustible materials on the PVC (Polyvinyl chloride) floor was burned, they didn't react to the gas detector. But flammable liquids had opposite results. After 7 days, we identified components of fire residues with the GC/MS (Gas Chromatography/Mass Spectrometry) about existence of flammable liquids and got components of flammable liquids. Fire investigation is a complicated processes. But we understand characteristics of materials, need detail investigations, and use the GC/MS to analyse flammable materials.

• Korean Journal of Optics and Photonics
• /
• v.23 no.6
• /
• pp.241-245
• /
• 2012

Measurements of the optical activity become very important issues in fields related to polymers, optical communications, astronomy, physics and many more. Hence it need to introduce this subject in our regular curriculum. In this experiment, an inexpensive, reliable, motorized polarimeter system which is suitable for undergraduate courses is constructed with PASCO's well-known Science Workshop 750 and a rotational motion sensor and light sensor, and the system is presented along with its experimental formulas. After responsivity of this system was checked by a half wave plate, and some repetitive experiments with 30% sucrose solution at 543.8 nm were performed. Comparing the experimental result with two calculated values from CRC data[1] showed that the specific rotation of the sucrose sample could be strongly suggested to be around +76 deg.cc/g.dm and it was an amply acceptable result for most undergraduate level courses.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.26-31
• /
• 1997

Bee venom (Apis mellifera) phospholipase $A_2$ solubilized in reversed micelles containing small amount of water stabilized by surfactant could catalyze the hydrolysis of dipalmitoyl phosphatidylcholine (DPPC). A sensitive and simple high performance liquid chromatographic (HPLC) methodology of phospholipase $A_2$ assay for the hydrolysis of DPPC was developed. Kinetic analysis of the phospholipase $A_2$-catalyzed reaction was found to be possible in reversed micelles. Among the surfactants and organic solvents tested, aerosol-OT and isooctane were most effective for the hydrolysis of DPPC in reversed micelles. Optimal temperature, optimal pH, $K_{m,app.},\;V_{max.,app.}$ and activation energy were determined to be $35{\sim}40^{\circ}C$, 7.0, 8.73 mM, 2.83 units/㎎ protein and 12.31 kcal/mole, respectively. The hydrolysis activity was dependent on water content and maximum activity was obtained at R value (=[water]/[aerosol-OT]) of 10.0.

• Archives of Reconstructive Microsurgery
• /
• v.5 no.1
• /
• pp.106-111
• /
• 1996

Purpose : Propose a surgical technique in donor harvesting method in free vascularized proximal fibular epiphysis. Methodology : Concerned about growth potentials of the transplanted epiphysis in our long term results of the epiphyseal transplanted 13 cases more than 4 years follow-up, anterior tibial artery which contains anterior tibial recurrent artery is most reliable vessel to proximal fibular epiphysis which is the best donor of the free vascularized epiphyseal transplantation. In vascular anatomical aspect proximal fibular epiphysis norished by latearl inferior genicular artery from popliteal, posterior tibial recurrent artery and anterior tibial recurrent artery from anterior tibial artery and peroneal artery through metaphysis. The lateral inferior genicular artery is very small and difficult to isolate, peroneal artery from metaphysis through epiphyseal plate can not give enough blood supply to epiphysis itself. The anterior tibial artery which include anterior tibial recurrent and posterior tibial recurrent artery is the best choice in this procedure. But anterior tibial recurrent artery merge from within one inch from bifucating point of the anterior and posterior tibial arteries from popliteal artery. So it is very difficult to get enough vascular pedicle length to anastomose in recipient vessel without vein graft even harvested from bifucating point from popliteal artery. Authors took recipient artery from distal direction of anterior tibial artery after ligation of the proximal popliteal side vessel, which can get unlimited pedicle length and safer dissection of the harvesting proximal fibular epiphysis. Results : This harvesting procedure can performed supine position, direct anterolateral approach to proximal tibiofibular joint. Dissect and isolate the biceps muscle insertion from fibular head, micro-dissection is needed to identify the anterior tibial recurrent arteries to proximal epiphysis, soft tissue release down to distal and deeper plane to find main anterior tibial artery which overlying on interosseous membrane. Special care is needed to protect peroneal nerve damage which across the surgical field. Conclusions : Proximal fibular epiphyseal transplantation with distally directed anterior tibial artery harvesting technique is effective and easier dissect and versatile application with much longer arterial pedicle.

• Korean Journal of Food Science and Technology
• /
• v.39 no.3
• /
• pp.231-236
• /
• 2007

The isoflavone distributions of soy samples treated with soaking, oven-drying, and almond additions were determined by high performance liquid chromatography (HPLC). Oven-drying was performed to increase the amount of ${\beta}-glucoside$ isoflavones, and almonds were added to convert the ${\beta}-glucosides$ into their corresponding aglycones. Oven-drying at $100^{\circ}C$ for 4 hr significantly increased ${\beta}-glucoside$ levels and decreased $malonyl-{\beta}-glucosides$, while almond additions of 2.5% and 5.0% (w/w) significantly increased aglycone contents (p<0.05) for samples with 12 hr of drying. The rate of increase for genistein from genistin was faster than that of daidzein from daidzin with almond additions. The ${\beta}-glucosidase$ activity in the 5.0% added almond soybean samples was significantly higher than in the samples without added almond (p<0.05). The aglycone content increased from 1.62% in the raw soybeans to 61.55% in the 2.5% added almond soybean samples for 12 hr of incubation. The information from this study could be used to increase the isoflavone aglycone contents of soybeans by using natural products such as almonds, without organic solvent additions or microorganism fermentation.

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.465-469
• /
• 1992

An analytical procedure is presented for the quantitative determination of lactose, glucose, and galactose in the hydrolyzate of lactose by ${\beta}$-galactosidase with high-performance liquid chromatography. An Aminex HPX-87C column at $85^{\circ}C$ and refractive index detector were used to resolve lactose, glucose, and galactose in only 12 minutes with distilled and deionized water as a mobile phase. The validity of high-performance liquid chromatography as a method for the assay of ${\beta}$-galactosidase was supported by recovery experiments and comparision of results with those by ONPG method, a spectrophotometric assay. The procedure was appropriate for determination of sugars in the enzyme reaction mixture and could by applied to analysis of ${\beta}$-galactosidase activity.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.185-194
• /
• 2016

This paper presents the finite element method results for HSS(Hollow Square Section) steel columns strengthened with Carbon Fiber Reinforced Polymer Plastic(CFRP) sheets. 6 specimens were fabricated and the specimen groups were non-compact short columns, slender short columns, and non-compact long columns. Test parameter was the number of CFRP ply. The finite element analysis was performed by using ANSYS Workbench V.14.0 and the results of FEM were compared with those of Test for failure mode, load-displacement curve, maximum load, and initial stiffness. The comparisons between experimental observations and computed results show that the analyses provided good correlation to actual behavior. Finally, the buckling stress were calculated according to the AISC cold-formed structure provision and the retrofitting effect were verified for each section type.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.453-461
• /
• 2014

In this study, the stub columns of built-up H-section and square hollow section subjected to eccentrical loads are tested to evaluate the applicability of the structural members with 800MPa high-strength steel (HSA800) on current design specification. Analytical studies of FE model are conducted to validate the test results and then the verified FE models are used for extensive parametric studies for checking up the applicability of current design code. The parameters are width-to-thickness ratios and axial load ratios. From P-M correlations on parameter models, all stub columns with non-compact sections exceed the current design requirements about axial force and flexural strength ratios are sufficiently secured as the axial load ratios are decreased. The built-up hollow sections with slender section model do not satisfy the current design specification about axial force.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.707-712
• /
• 1999

We have produced new-structured oligosaccharides using mixed-enzyme reactor of dextransucrase from Leuconostoc mesenterides B-512FMCM and ${\alpha}$-amylase. When the concentrations of sucrose and starch were 10%(w/v) and 5%(w/v), respectively, the maximum yield of oligosaccharides with both dextransucrase(100U) and ${\alpha}$-amylase(1000U) was 66.4%. The activity of dextransucrase in mixed-enzyme reactor was increased about 2.5 times by acceptor reaction with starch hydrolyzates. As the activities of dextransucrase:${\alpha}$-amylase were increased from 20U:200U to 500U:5000U, the amount of polymer was increased and the yield of oligosaccharides was decreased. By the addition of sucrose into mixed-enzyme reactor following the prehydrolysis of starch with ${\alpha}$-amylase, the yield was increased up to 12% compared with that of mixed-enzyme reactor without the addition of starch hydrolyzate. New structured-oligosaccharides showed heat resistance up to 140$^{\circ}C$ and was stable in acidic condition at pH 3~6.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.1-8
• /
• 2019

The international standard for FT-IR gas analysis of fire effluents in ISO 5660-1 cone calorimeter has been being developed in ISO TC 92. A comparison of the round-robin test of WD 21397 was conducted with six participating laboratories in 2018. The test specimens were PMMA, rigid PU foam board, and PVC flooring. The measurement quantities were the time-to-ignition, peak heat release rate, total heat release, and effective heat of combustion for a cone calorimeter test and peak gas concentration, gas generation, and gas yield for FT-IR gas analysis. No outliers were identified. For the cone calorimeter quantities, the repeatability and reproducibility were 1.5% and 9.8%, respectively. For FT-IR gas analysis, the repeatability and reproducibility was 12.9% and 27.9%, respectively.