• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.3
• /
• pp.255-265
• /
• 2009

Recently many studies have been published on application of immediate loaded implants. However, the immediate loading protocol has not been well documented. The purpose of the present study was to evaluate the stress distribution between bone-implant interfaces and the effect of implant length in the anterior maxilla using 3 dimensional finite element analyses. The diameter 4.0 mm threaded type implants with different length(8.5 mm, 10.0 mm, 11.5 mm, 13.0 mm, 15.0 mm) were used in this study. The bone quality of anterior maxillary bone block was assumed to D3 bone. Bone-implant interfaces of immediately loaded implant were constructed using a contact element for simulating the non osseointegration status. For simplification of all the processing procedures, all of the material assumed to be homogenous, isotropic, and linearly elastic. The 178 N of static force was applied on the middle of the palatoincisal line angle of the abutment with $120^{\circ}$ angle to the long axis of abutment. Maximum von Mises stress were concentrated on the labial cortical bone of the implant neck area, especially at the cortical-cancellous bone interfaces. Compared the different length, highest peak stress value was observed at the 8.5 mm implants and the results indicated a tendency towards favorable stress distribution on the bone, when the length was increased. Presence of cortical bone was very important to immediate loading, and it appears that implants of a length more than 13 mm are preferable for immediate loading at the anterior maxilla.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.2
• /
• pp.176-186
• /
• 2016

This study was performed to compare the shape and dimension of anterior zirconia crowns to other pediatric crowns using a three-dimensional scanner to investigate adequate amount of tooth preparation. Primary central and lateral anterior zirconia crowns, stainless steel crowns and celluloid strip crowns were scanned by a three-dimensional scanner. Outer and inner surfaces of zirconia and stainless steel crowns, and outer surface of celluloid strip crowns were analyzed. In outer scanned images, all sizes of central and lateral size 1 zirconia crown had the largest labiolingual diameter among the three crowns. In inner scanned images, zirconia crown's mesiodistal diameter was 0.7-1.0 mm smaller and crown length was approximately 1 mm shorter than those of stainless steel crowns. Zirconia crown's labiolingual diameter was larger in central crowns whereas it was smaller in lateral crowns than that of stainless steel crowns. Recommended preparation required for zirconia crown is incisal 2.5-3.0 mm, mesiodistal 1.5-2.0 mm, labial 0.5-1.0 mm. Cingulum should be trimmed parallel to the long axis. No more lingual reduction is needed in central incisors whereas additional 0.5 mm reduction is suggested in lateral incisors.

• Korean Journal of Plant Resources
• /
• v.29 no.5
• /
• pp.564-573
• /
• 2016

This research was performed to develop mass propagation method of round-leaved sundew (Drosera rotundifolia L.) for improving horticultural usefulness. Seeds were collected around Hwaseong-si, Gyeonggi-do in October of 2011 and experimented upon while being dry-stored at 4 ± 1.0℃ (darkness). Seed length of a major and minor axis were 1.58 ± 0.060 and 0.21 ± 0.016 ㎜, respecrively, and weight of 1,000 seeds was 6.24 ± 0.172 ㎎. Seeds were thus classified as ‘dwarf seeds’. Regarding the dormancy type, since round-leaved sundew seeds were dormancy broken and germinated at 20~30℃ under the light condition after wet-chilling treatment for 12 weeks, seeds were estimated to have physiological dormancy. Germination conditions of dormancy broken seeds were found to be 20℃ and light condition (54.7%), but germination decreased at higher temperature. Percent germination (PG), germination energy (GE), mean germination time (MGT) and T₅₀ were effectively improved by chemical treatment such as GA₃ 200 ㎎/L + kinetin 20 ㎎/L and wet-chilling treatment for 14 weeks. In conclusion these optimal conditions were thought to be a useful method for raising seedling uniformly.

• Archives of Reconstructive Microsurgery
• /
• v.7 no.2
• /
• pp.146-156
• /
• 1998

Microvascular surgery has been widely used clinically for over 30 years. Although many types of free skin and myocutaneous flap are being used at present, surgeons are still looking for new flaps to suit the specific requirements of different recipient sites, to reduce the deformity at the donor site, to ease the management of the flap and to increase the success rate of those operations. The lateral thigh free flap was designed and reported simultaneously with the medial thigh free flap by Baek in 1983. The flap, based on the third perforator of the profunda femoris artery. is designed on the posterolateral aspect of the distal thigh. Clinically, the vascular variations and the locations of perforators of this system can be determined preoperatively with simple angiograms and Dopper audiometry. The lateral thigh free flap is suitable for reconstruction of defects in an oral floor with tongue and esophageal deficits, scalp defects with dural defects, and large full thickness defects of the lip. The advantages of this flap are safe elevation, a long vascular pedicles with a large lumen, skin that is generally thin, and good pliability. Furthermore, the skin territory is very wide and long. The donor site is hidden and therefore more acceptable to the patient. The disadvantage of this flap is that the anatomy of the pedicle vessels has irregular derivation from the main vessel. We had reconstructed lateral thigh free flap to the nine patients from January, 1997 to July, 1998 and got satisfactory results. In this paper we illustrate the arterial anatomy of the thigh and usefulness of this flap for the reconstruction of the head and neck.

• Journal of the Korean earth science society
• /
• v.33 no.4
• /
• pp.337-349
• /
• 2012

In this study, we classify the 1000 hPa geopotential height fields around the Korean peninsula through the Kmeans cluster analysis and investigate the occurrence characteristics of each cluster pattern. The 11 clusters are identified as the typical pressure patterns, applying the pattern correlation as a similarity among clusters and the criterion of cluster similarity 0.8, of which three pressure patterns are associated with the extension of Siberia air mass, other three with the latitudes of the longest symmetry axis of North Pacific highs, two with the trough largely under the air mass of Siberia or North Pacific, and the remaining three, the migratory high patterns generally occurring in spring and autumn, are disjointed according to the direction of the longest symmetry axis of highs. The occurrence rate of air masses affecting the Korean peninsula, estimated from the number of occurrence days of 11 pressure patterns, is 55.4% Siberian, 29.3% North Pacific, 12.8% Yangtze-River, 2.5% Okhotsk sea and 68.2% of all these is the continental air masses. The wintertime pressure patterns around the Korean peninsula are nearly contrary to those in summertime, each dominated by the highs extended from the stationary air masses over the Central Siberia and the North Pacific ocean. The migratory highs occur largely in spring and autumn while transferring from the wintertime patterns to summertime patterns, or vice versa. Recently, the occurrence frequency of the highs extended from the North Pacific is on the decrease and while the wintertime pressure patterns occur frequently in spring and autumn, the occurrence frequency of the pressure patterns with trough is on the increase and the migratory highs occur in nearly all seasons.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.391-401
• /
• 2009

The successful outcome of dental implants is mainly the result of intial implant stability following placement. The aim of this study was to investigate the effect of a self-tapping blades and implant design on initial stability of two tapered implant systems in poor bone quality. The two different implant systems included one with self-tapping blades and one without self-tapping blades. D4 bone model using Solid Rigid Polyurethane Form was used to simulate poor bone densities. The insertion torque during implant placement was recorded. Resonance frequency Analysis (RFA), measured as the implant stability quotient (ISQ), was assessed immediately after insertion. Finally, the implant-bone specimen was transferred to an Universal Testing Machine to measure the axial pull-out force. Insertion torque values and maximum pull-out torque value of the non self-tapping implants were significantly higher than those in the self-tapping group (P = 0.008). No statistically differences were noted between the two implant designs in RFA. Within the each implant system, no correlation among insertion torque, maximum pull-out torque and RFA value could be determined. Higher insertion torque of the non-self-tapping implants appeared to confirm higher clinical initial stability. In conclusion, implants without self-tapping blades have higher initial stability than implants with self-tapping blades in poor bone quality.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.389-403
• /
• 2010

Titanium and gold-alloy abutments have been used for a long-time in the clinical situations, but the use of zirconia abutments also increased. This study was designed to compare and evaluate the microgap differences according to types of abutment and dynamic loading. Titanium abutment, zirconia abutment and gold-alloy abutment (UCLA plastic) were connected into titanium implants of external hexagonal structure US II ${\phi}$ $3.75{\times}11.5$ mm (Osstem Co., Seoul, Korea) with the tightening torque of 30 Ncm. A sine type dynamic loading of 25-250 N and $30^{\circ}$ inclination from long axis was applied for $10^5$ times. Using the SEM both before and after the loadings, implant-abutment interfaces were analyzed on the labial, palatal, mesial and distal surface. The microgaps before and after the loading were compared, no statistically significant difference was observed caused by the dynamic loading on the labial, palatal, mesial or distal surface. Statistically significant difference was observed between UCLA and titanium group and between UCLA and zirconia group on both before and after the loading(p<0.05). No statistically significant difference was found between titanium and zirconia group. Loadings for $10^5$ times did not show significant effect to the microgaps between implants and abutments.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.5
• /
• pp.787-807
• /
• 2018

When conducting the underground safety impact assessment under the special law in Korea, it is essential to investigate the occurrence of underground cavities. When underground cavities were discovered, the underground safety was assessed through numerical analysis. The previous study has suggested the stability evaluation based on the factor of safety by changing the 2D shape of the small underground cavity. In this study, the effects of small underground cavities considering 3D shapes were examined using a continuum analysis program and compared with the 2D results presented in previous study. If the 3-Dimensional shape of the underground cavity is found close to the sphere type, it would be reasonable to evaluate the factor of safety by the shear strength reduction method regardless of the size and position of the cavity. If a high-aspect ratio underground cavity with a depth of 2 m or more from the ground surface and an aspect ratio (a/b) of 2.0 or more is in the vertical direction, not only the factor of safety but the failure mode shape should be cautions in the stability evaluation using the shear strength reduction method. The results of this study are expected to be basic data on underground safety impact assessment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.354-360
• /
• 2020

This study examined the factors for sorting miscellaneous cereal crops using a rice-sorting device by analyzing the physical characteristics according to the moisture content. The initial moisture contents of miscellaneous cereal were 16.3, 19.8, and 16.5%, respectively. The samples were used in the experiment after drying to five levels. The width, length, and area of the samples increased with increasing moisture content except for the roundness, and all the prediction models were developed with a first-order linear equation. The bulk density of Italian millet and sorghum increased with increasing moisture content, whereas the bulk density of common millet was unaffected by the change in moisture content. The terminal velocity of the samples increased with increasing moisture content, and a first-order linear equation was used to develop the prediction models. The measured physical properties of the miscellaneous cereal crops based on the changes in the moisture content could be expressed using a first-order experimental model equation. Therefore, the rice-sorting device could be applied to the terminal velocity, but the other device applying the geometrical characteristics and bulk density was required to change the design of the process depending on the type of grain.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.543-549
• /
• 2000

Gutta-percha와 근관sealer를 사용한 근관 충전은 가장 많이 이용되고 성공률이 높은 방법이지만, 현재 사용되는 모든 근관sealer는 미세누출을 나타낸다. 따라서 더 효과적인 근관 폐쇄를 이루기 위한 재료 및 방법들이 연구되어왔다. 이중 상아질 접착제는 근관 충전재와 함께 사용되어 미세누출을 감소시키지만, 근관 내에 사용하기에 술식이 복잡하고 기술이 요구된다. 본 연구의 목적은 gutta-percha와 레진계 근관 sealer로 충전한 근관에서 self-etching primer를 미리 도포한 경우와 도포하지 않은 경우의 치근단 미세누출을 비교하고, self-etching primer를 도포함에 있어 근관 내에 적용하는 방법에 따른 미세누출을 비교하는 것이다. 또한 근관sealer와 상아질 계면을 주사전자현미경으로 관찰하여, 이 결과를 미세누출과 관련시켜보고자 하였다. 36개의 발거된 사람의 단근치에서 치관부를 절단, 제거하고 ProFile로 근관 형성한 후, 무작위로 선택하여 4개의 군으로 분류하였다. 1군에서는 주사기와 30게이지 주사 바늘로 self-etching primer를 근관 내에 적용하였고, 2군에서는 self-etching primer를 paper point에 적셔 근관 내에 적용하였다. 3군에서는 self-etching primer를 적용하지 않았다. 1, 2, 3군의 치아를 gutta-percha와 AH26 sealer를 사용하여 continuous wave 충전법으로 충전한 후 치근단공 주위 3mm를 제외한 치근변에 nail polish를 2회 도포하였고, 4군(음성 대조군)은 치근면 전체에 도포하였다. 1군과 2군에서 각각 2개의 치아는 주사전자현미경적 관찰을 위해 준비하였다. 모든 치아를 Methylene Blue 수용액에 48시간동안 침적, 수세한 후 치아 장축에 평행하게 양분하여 10배의 실물확대현미경 하에서 치근단 색소 침투를 관찰하였다. Self-etching primer를 도포한 군과 도포하지 않은 군 사이에는 평균 미세누출량에 유의한 차이가 없었다. 주사 바늘로 적용한 군과 paper point로 적용한 군 사이에도 평균 미세누출량에 유의한 차이가 없었다. 상아질과 근관 sealer계면의 주사전자현미경 관찰 결과 일부분에서 긴밀한 접착 관계를 나타내었고, 다른 부분에서는 간극을 나타내었다.