• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.302-308
• /
• 2010

In MRI, the Ferromagnetic artifact is generated by the metalization within in which the before inspection removal is impossible and the distortion of an image is brought. The distortion measure according to the steel for each sequence of T1 image and magnetic field intensity are analyzed and minimized method is looked into. We used SIEMENS 1.5T and 3.0T MRI for experiment equipment. First, it places within the Phantom making a metalization(Ti+Al, Stainless, Nitinol) on 1.5T, 3.0T MRI and the T1 weighted image for each Sequence is acquired. The distortion of an image and about adjacent portion change of the metal material were compared through the obtained image, we analyzed. In all metalizations, a distortion was generated and a distortion was few in particularly, and Titanium-Aluminium alloy. And the extent of a distortion was worse image in the Turbo spin Echo. The use of the Titanium-Aluminium alloy the inserted in an internal material of the metalization is recommend. and, equipment of 1.5T the patient inserting a metal in an internal is used in an inspection than equipment of 3.0T. Also, the sequence is suitable when it obtains the optimum T1 weighted image of an impersonate to use the Turbo spin Echo.

• Clinics in Shoulder and Elbow
• /
• v.15 no.2
• /
• pp.109-116
• /
• 2012

Purpose: The aim of this study was to evaluate preoperative ultrasonographic findings and usefulness in ulnar neuropathy around elbow. Materials and Methods: Twenty-two patients with ulnar neuropathy were performed preoperative ultrasonogram. The route, location, thickness of the ulnar nerve and space occupying lesion through longitudinal scan were evaluated. Cross-sectional areas of the ulnar nerve were measured at the level of medial epicondyle and 3 cm proximal and distal to the medial epicondyle through axial scan. Correlations between swelling ratio of ulnar nerve and eletrophysiologic study and preoperative Dellon's assessment were checked. Results: In 21 cases (95.6%) of total 22 cases, diffuse swelling of the ulnar nerve around elbow were identified. 4 cases had space occupying lesions including 3 ganglionic cysts and 1 heterotopic ossification. Cross sectional areas at the level of medial epicondyle were significantly larger than at the level of 3 cm proximal and distal to the medial epicondyle (p<0.05). There were no statistically significant correlations between swelling ratio of ulnar nerve and eletrophysiologic study and preoperative clinical assessment (p>0.05). Conclusion: This study showed that ultrasonography was helpful to detect etiology of ulnar neuropathy around elbow such as space occupying lesion, morphological change or dislocation of ulnar nerve. It could be useful tool for diagnosis and treatment in patients with ulnar neuropathy at elbow.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.97-106
• /
• 2011

Purpose: This review article was written to theoretically compare the depressing force (pressure, adhesion) to the cornea between when the spherical lenses were being tightly and flat fitted. Methods: Mathematical equations and their numerical solution programs (model) were formulated to calculate the depressing (adhesion) force to the cornea by both the tightly and flat fitted contact lenses. Based on this proposed model the effects of parameters characterizing a contact lens such as BCs, diameters, edge shape and corneal shape (ratio of long and short corneal axis, p) on the depressing force to the cornea were predicted/analyzed in both tightly and flat fitting regimes. Results: Corneal adhesion increased as the corneal p-value increased. Adhesion increase caused by the increased p-value was much larger in flat fitted case than in tight fitted one. Corneal adhesion reduced abruptly as the BC increased in flat fitting regimes while the adhesion rise was insignificant in tight fitting ones. Reduction in corneal adhesion due to lens-size increase was predicted to be insignificant in both tight and flat fitting regimes. Both the lens edge shape (edge angle) and thickness were relevant only in tight fitting regime. Corneal adhesion increased as the increased with tight-fitted lenses. As the thickness of tight fitted lenses increased, corneal adhesion inversely decreased. Conclusions: The two most significantly affecting the depressing force to cornea were found to be the degree of corneal bending toward the periphery and the BCs of lenses.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.262-267
• /
• 2013

Gravitational field-flow fractionation (GrFFF) is a separation technique that utilizes earth's gravity as the external field. GrFFF is a convenient tool for the size and/or density-based separation of micron-sized particles of various origins. In this study, GrFFF was employed for size-based separation of oyster mushroom spores. Oyster mushroom spores have smooth surface and are of cylindrical to narrow kidney-shapes with 5 to 12 im in longer dimension and 3 to 4 im in shorter dimension, as was confirmed by optical microscope (OM). GrFFF conditions were optimized for separation and characterization of spores by varying the channel flow rate from 0.5 to 1 mL/min. During the GrFFF elution of the spores, 3 fractions were collected to confirm the growth of oyster mushroom spore. The collected fractions were incubated for 30 days in water to examine the influence of the size on the growth of the spores. Results suggested that the oyster mushroom spores collected at the middle part of the GrFFF fractogram grew faster than those collected at the beginning or at the end of the fractogram.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.62-70
• /
• 2003

Purpose: We examined the kinematics and kinetics of the shoulder in youth baseball pitchers in light of the mechanisms of development of little league shoulder and humeral retrotorsion. Materials and Methods: The joint kinematics and the net force and torque acting on the humerus were calculated in fourteen youth pitchers throwing in a simulated game. Results: The major force component acting on the humerus was a tensile force of 378$\pm$81 N that peaked just after ball release. The predominant torque on the humerus was an external rotation torque about the long axis of the humerus. This torque reached a peak value of 35.3$\pm$6.7 Nm about 73$\%$through the pitching motion. This torque is approximately 66$\%$ of the torque required to fracture of the adult humerus. Conclusions: The direction of the humeral torque was consistent with the development of increased humeral retrotorsion in the throwing arm. Shear stress arising from the high torque during the late cocking phase likely leads to deformation the relatively weak proximal humeral epiphysis. The external rotation torque applied to the humerus during the pitch also agrees with the proposed mechanism for development little league shoulder, which has been hypothesized to be due to rotational stresses acting on the epiphysis during the throwing motion.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.287-292
• /
• 1998

The perfect state of Bipolaris coicis, causing leaf blight of Job's tears, was in duced under in vitro conditions. Eighty nine isolates of the fungus were collected from 17 locations in Korea from 1994 to 1996. They were crossed on Sach's nutrient agar, on which a piece of rice straw was placed, and incubated at $25^{\circ}C$. Pseudothecia were produced only by certain combinations of compatible isolates. Although pseudothecia were usually produced on rice straw two weeks after incubation, asci and ascospores were observed only in a few pseudothecia examined. The pseudothecia were black and globose with protruding ostiolar beaks. The locules were filled with a mass of hyaline and filamentous pseudoparaphyses. Asci were cylindrical to clavate and straight or slightly curved. The ascus wall was bitunicate with short stipes. Ascospores were filiform, hyaline, and arranged parallel to slightly coiled in the asci, measuring $143-166.4{\times}2.6-3.8\;{\mu}m$. Perfect state of the fungus was identified as Cochliobolus nisikadoi (Tsuda, Ueyama & Nishihara Alcorn), based on the morphological characteristics.

• The Korean Journal of Mycology
• /
• v.25 no.4 s.83
• /
• pp.291-296
• /
• 1997

Diseased leaves of Job's tears were collected at six locations in Korea to isolate and identify the pathogen causing leaf blight. Conidia were brown, fusoid, and slightly curved. They were $25{\sim}46{\times}10{\sim}15\;{\mu}m$ in size, and had mostly 4 septa which were characteristic of pseudosepta. A few conidia had slightly protruding hila, whereas most had no hilum. Conidial germ tubes were produced mostly from both polar end cells (bipolar), and progressed in semiaxial direction. When seedlings of Job's tears were inoculated with conidia, long, spindle-shaped, and brown lesions were produced on leaves, and entire leaves became blighted 15 days later. Based on the aggressiveness in pathogenicity, the isolates could be divided into two groups. Considering the mycological characteristics and pathogenicity of the fungus, the pathogen causing leaf blight of Job's tears was determined to be Bipolaris coicis (Nisikado) Shoemaker.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.3
• /
• pp.284-291
• /
• 2016

In order to provide a diagnostic basis for predicting the possibility of the self-correction of ectopic first permanent molars, differences among normal eruption, reversible and irreversible ectopic eruption of maxillary first permanent molars were retrospectively analyzed. The angles of the long axes and the occlusal lines between the maxillary first permanent molar and the adjacent tooth were measured by panoramic radiographs. The occlusal relationship of second primary molars was also investigated. There is a statistically significant difference between the ectopic eruption group and normal group (p < 0.05), but not between the reversible and irreversible ectopic eruption groups (p > 0.05). The angles between the second primary molar and the first permanent molar, the second primary molar and the second permanent molar in ectopic groups showed a smaller degree than those of the control group. Mesial step was found more frequently in the ectopic eruption group than the normal group. In conclusion, the angulation of the first permanent molar and tooth germ of the maxillary second permanent molar showed close relation with ectopic eruption of the maxillary first permanent molar and ectopic first permanent molar is likely to occur in class III patients with maxillary deficiency.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.607-618
• /
• 2008

This study three-dimensionally and histologically assessed the effect of Emdogain$^{(R)}$ on periodontal healing in replanted teeth in three beagle dogs which were 1 to 2 years old, weighing from 10 to 13 ㎏. Twelve maxillary and mandibular incisors were intentionally extracted and replanted after 15(Group I), 30(Group II) and 60(Group III) minutes of air dry storage with and without the application of Emdogain$^{(R)}$. The following conclusions could be drawn from the present investigation. 1. Increased incidence of inflammatory healing response in periodontal tissue was proportional to air dry time in Both control and experimental group(P<0.001). 2. Treatment Group showed lower inflammatory root resorption, especially there were statically significant in Group I, III(P<0.001, Group II : P=0.093). 3. Inflammatory root resorption were mainly occurred in apical third(14, 15-16 section)(P<0.05, 0.001), and cervical third(1 section)(P<0.05). 4. In view of horizontal section of long tooth axis, Main root resorption area were 1, 4, 5 line area(bucco-lingual area)(p<0.01).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.4
• /
• pp.371-392
• /
• 2011

The purpose of this study was to comparatively analyze the stress distribution according to the inclinations of abutments and angulations of the implant fixtures under occlusal loading force. Three study models with straight and $15^{\circ}$ and $25^{\circ}$-angled abutments were prepared following the insertion of Implants parallel to the long axis of the tooth. Additional two experimental models were fabricated with $15^{\circ}$ and $25^{\circ}$ fixture inclinations. Using ANSYS 11, a finite element analysis program, the magnitudes of stress distribution were analyzed. The magnitude of stress under loading was lowest when the load was applied vertically onto the axis of implant. And the magnitude of stress under compound(vertical+oblique) loading was increased as the inclination of implant abutment and fixture was increase. But, the distribution of stress was different as the loading conditions, because of the horizontal offset. As the offset between the axis of loading and the central axis of the implant increased, the stress was increased.