• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.279-288
• /
• 2011

This paper will discuss the alignment techniques and measurement results of geostationary satellite communication antennas for correct antenna pointing and also the fixtures. To get the best performance in terms of antenna pointing and fixtures, zero G condition have been simulated and laser tracker and theodolite system have been applied. As a result, alignment stability was verified within the tolerance, ${\pm}\;0.25mm$ and ${\pm}\;0.013^{\circ}$ and finally Ka-band deployable antenna alignment has been accomplished within the tolerance, ${\pm}\;0.5mm$ and ${\pm}\;0.015^{\circ}$.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.514-516
• /
• 2003

고배율 렌즈를 장착한 3차원 비접촉 측정 장비에서 컴퓨터 비전을 이용한 정밀도 높은 형상의 측정을 위해서는 선명한 영상 획득을 위한 정확한 초점 위치 결정이 선행되어야 한다. 본 논문에서는 정초점 위치를 찾기 위하여 수동형 초점 조절 방법을 사용한다. 각각의 렌즈 위치에서의 입력 영상에 대해 초점 위치 추적의 척도가 되는 초점값을 변형된 LoG 방법을 이용하여 측정하고, 측정된 초점값들의 렌즈 위치에 따른 분포 곡선에 대한 가우시안 정합을 적용한 정초점 위치 검색을 통해 최적의 초점 위치를 결정하는 기법을 제안한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.5
• /
• pp.725-731
• /
• 2013

In This paper, through simulation, proposes a system which makes it possible for freely moving multiple agents with ultrasonic receivers to estimate their own position by themselves using the ultrasonic signals sequentially emitted from multiple ultrasonic transmitters. This system possesses an advantage that there is no limit in the number of agents existing in the space covered by more than three transmitters fixed at proper locations. Hence, the proposed system can be utilized effectively in position tracking control of multiple robotic agents system and motion capturing system.

• Journal of Korea Multimedia Society
• /
• v.13 no.3
• /
• pp.400-409
• /
• 2010

This paper presents a position error recognition system when the wafer is mounted in cleaning equipment among the wafer manufacturing processes. The proposed system is to enhance the performance in cost and reliability by preventing the wafer cleaning system from damaging by alerting it when it is put in correct position. The key algorithms are the calibration method between image acquired from camera and physical wafer, a infrared lighting and the design of the filter, and the extraction of wafer boundary and the position error recognition resulting from generation of circle based on least square method. The system is to install in-line process using high reliable and high accurate position recognition. The experimental results show that the performance is good in detecting errors within tolerance.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.188-190
• /
• 2008

본 논문에서는 초음파 센서를 이용하여 이동하는 표적의 위치를 실시간으로 추적하는 위치추적 시스템을 개발하였다. 위치 추적 시스템은 4 개의 초음파 센서를 이용해서 각 센서에서 탐지되는 표적까지의 거리 정보를 이용하여 이동하는 표적의 위치좌표(x,y)를 구하였다. 특히 초음파 센서가 가지고 있는 빔폭 특성을 고려하여 4 개 센서 중 2개 센서에만 표적이 탐지될 경우 표적의 위치를 최적화하는 방안을 제시하였으며 개발된 알고리즘을 하드웨어에 장착하어 감시시스템이 실시간 양호하게 구동하는것을 확인하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.502-504
• /
• 2004

지능형 교통 정보 시스템을 구축할 때 반드시 요구되는 것이 바로 위치 정보이다. 대부분 GPS (Global Positioning System)와 같은 장치를 이용하여 위치 정보를 얻게 된다. 그러나 GPS수신기와 같은 장치는 상대적으로 비용이 크기 때문에 차량마다 장착하여 지능형 교통 정보 시스템에 활용하기에는 부담이 된다. 따라서 본 논문에서는 기존의 무선랜으로 위치를 추적하는 방법을 버스 지능형 교통 정보 시스템에 적용한 시스템 구조를 제안한다. 버스는 노선의 자유도가 택시 같은 다른 교통편에 비해서 작으므로 무선랜으로 위치 추적하는 방법은 다른 위치 추적 방법에 비해 경제적으로 보다 적합하다.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.316-320
• /
• 2013

본 논문은 일반 항공기와 카나드를 장착한 항공기의 차이점을 알아보기 위해 카나드와 주익의 수평위치에 따른 공력특성을 비교하였다. 카나드를 장착한 비행기는 비행 안정성에 이점을 얻을 수 있고 주익(Main wing)에서의 실속 현상을 미연에 방지 할 수 있는 장점이 있다. 이러한 현상을 알아보기 위해 카나드와 주익간의 위치를 변화시켜 그에 따른 공력특성을 EDISON 프로그램을 통해 해석하여 보았고 이를 ANSYS의 FLUENT를 이용하여 해석한 결과와 비교분석하여 신뢰성을 확보 할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.982-989
• /
• 2013

Omni-directional antennas of UHF-Band are located on the top and bottom side of the Smart UAV in order to connect a link always. Therefore one of each antennas should be connected to a ground antenna. Because the communication link of the omni-directional antennas is influenced by the objectives around aircraft, the clearance of LOS(Line of Sight) should be achieved in order to avoid a loss of link. In this paper, the analysis results on the influence of the complex objectives placed around the antenna on the communication link are presented according to the change of attitude angles. The best positions of antennas are selected based on the electromagnetic analysis using XGTD tool which supports the modeling of antenna pattern. The flight tests of the Smart UAV were successfully performed with the selected antenna position.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.126-133
• /
• 2021

Axial displacement of an implant-supported prosthesis is frequently reported in clinical and laboratory studies. However, limited information is available about the behavior of the axial displacement of implant-supported prostheses functioning in intraoral situations. The present case report evaluated the three-dimensional displacement of posterior single implant-supported prostheses in 2 different patients. Internal connection type implants were placed, and screw and cement-retained prosthesis (SCRP) type prosthesis were delivered after an appropriate healing period. Intraoral digital scans were performed using an intraoral scanner (Cerec Omnicam, Dentsply Sirona, USA) on the day of crown delivery and one week, one month, and one year after delivery. The amount of 3-dimensional displacement of the prosthesis was evaluated by using a digital inspection software (Geomagic Control X, 3D systems, USA). The axial displacement of implant-supported prosthesis occurred in both patients. Furthermore, the amount of displacement increased over time.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.45-51
• /
• 2005

This paper presents a comparison of rotor position estimation of a switched reluctance motor(SRM) with built-in search coils by three methods. The search coil EMFs are not generated in the SRM with built-in search coils at standstill. So an initial rotor position estimation method is needed. In this paper squared euclidean distance, fuzzy logic and neural network methods we proposed for the estimation of initial rotor position. The simulated results of the three methods are compared. The simulated result of the squared euclidean distance method, which has the best performance, is supported by the experimental result.