• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.219-228
• /
• 2010

A two-dimensional mathematical model was developed to predict the temperature and moisture-content profiles of a tumble dryer during infrared drying. The model is based on the movements of liquid water and moisture in the object and on the fluid and heat transfer in the drying air. The model was solved by the finite volume analysis for the fluid, temperature, and radiation intensity fields. After deriving the governing equations and developing the two-dimensional tumble dryer models, numerical investigations were carried out to examine the effects of various parameters such as the heater temperature and the heating patterns on the drying mechanism of the tumble dryer. All the results show that the drying time can be reduced by using the IR heater.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.61-70
• /
• 2008

This paper presents the flexible MEMS transmitter based on flexible printed circuit board or FPCB, which can be transformed to arbitrary shape. The FPCB is suitable to fabricate light weight and small size modules with the help of its thin thickness. Moreover a module based on FPCB can be attached on the arbitrary curved surface due to its flexible enough to be lolled up like paper. In this paper, the flexible MEMS transmitter integrated on FPCB for a short-distance sensor network which is based on orthogonal frequency division multiplexing(OFDM) communication system is proposed. The active device of the proposed flexible MEMS transmitter is fabricated on InGaP/GaAs HBT process which has been used for power amplifier design to take advantages of high linear and high efficient characteristics. Moreover, the passive devices such as the filter and signal lines are integrated and fabricated on the FPCB board. The performance of the fabricated flexible MEMS transmitter is analyzed with EVM characteristics of the output signal.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.113-124
• /
• 2009

This paper suggests a new approach for providing information for driver safety at signalized intersections. Particularly dangerous situations at signalized intersections such as red-light violations, accelerating through yellow intervals, red-light running, and stopping abruptly due to the dilemma zone problem are considered in this study. This paper presents the development of a dangerous vehicle determination algorithm by collecting real-time vehicle speeds and times from multiple point detectors when the vehicles are traveling during phase-change. For an evaluation of this algorithm, VISSIM is used to perform a real-time multiple detection situation by changing the input data such as various inflow-volume, design speed change, driver perception, and response time. As a result the correct-classification rate is approximately 98.5% and the prediction rate of the algorithm is approximately 88.5%. This paper shows the sensitivity results by changing the input data. This result showed that the new approach can be used to improve safety for signalized intersections.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.262-262
• /
• 2017

새만금 유역의 농업비점오염원은 총수질오염원의 68%로 많은 비중을 차지하고 있다. 이는 새만금 유역의 농업비점오염원을 제어하지 못하면 새만금 담수호의 수질에 악영향을 미친다는 의미이다. 또한, 국내 논 용수 이용량은 국가수자원 총 이용량의 40.5%으로 많은 비중을 차지하고 있다. 이에 따라서 논 배출수의 수량 및 수질관리가 농촌 비점오염 물질 관리에 매우 중요하다. 현재 많은 연구자들이 농촌 비점오염 물질을 저감하기 위하여 다양한 최적관리기법에 대한 실험을 실시하였다. 그러나 대부분 시험포를 조성하고 제한된 실험조건에서 효과를 검증한 연구 결과로 실제 농민에게 최적관리기법을 보급하여 그 효과를 검증한 연구는 미흡한 실정이다. 따라서 본 연구에서는 새만금유역 내 논에서 실제 영농활동을 실시하고 있는 농민들에게 최적관리기법 중 하나인 물꼬장치를 보급하고 물꼬 높이를 조절하게 함으로써 농민 스스로 비점오염물질을 저감 할 수 있도록 장려하였다. 연구 대상지점은 전라북도 부안군 백산면 용계리 일대 논이며, 연구 기간은 5월부터 9월까지로 영농 활동기를 대상으로 모니터링을 실시하였다. 물꼬 높이 조절은 중간낙수기 이전은 7 cm, 중간낙수 이후와 비영농기에는 물꼬 높이를 12 cm로 높여서 유지하도록 하였다. 농민 스스로 물꼬 높이를 조절하여 비점오염물질을 저감할 수 있도록 물꼬 보급 이후 정기적으로 교육을 실시하였다. 이후 영농 활동기별 유출량을 비교한 결과 관행 대비 평시 14%, 써레질 및 이앙기 3%, 강우시 15%, 중간낙수 기간에는 11%, 완전 물떼기 기간에는 10%의 저감효과가 있는 것으로 나타났다. 그러나 각 필지별 농도 및 오염부하 비교 결과 배수물꼬 적용에 따라 통계적으로 유의한 결과를 나타내지는 않았다. 배수물꼬 장치를 설치할 경우 유출량을 저감에는 큰 효과가 있었으나 농도를 줄이는데 에는 한계가 있는 것으로 나타났다. 하지만 본 연구 결과는 2016년 1년간의 짧은 연구기간동안의 자료이므로 추가적인 장기모니터링 연구를 통해 더 많은 자료구축이 필요하다.

• Research in Plant Disease
• /
• v.9 no.1
• /
• pp.32-35
• /
• 2003

Pink rot of potato (Solanum tuberosum L.) occurred at Pyeongchang in Gangwon and at Bosung in Junnam province since 1999. The disease incidence in the surveyed areas was about 5% of harvested potatoes in 2002. Affected tubers showed a dull brown appearance and the lenticels and eyes on tubers turned dark brown. The cut surface of the diseased tuber colored faint pink and the entire surface of the diseased tuber becomes deep salmon pink within 30 min. The pathogen isolated from the diseased tubers was identified as Phytophthora erythroseptica based on morphological and cultural characteristics. Mycelial mat was fairly fluffy, rosette or stellate patterns and rounded or angular hyphal swellings were farmed in water, Temperature for mycelial growth was ranged from 5 to 3$0^{\circ}C$ and optimal temperature was $25^{\circ}C$. Non-papillate sporangia were persistent on stalk and ellipsoid, ovoid, obpyriform or distorted in shape, often with a constriction distal in the middle. Size of sporangia was 41.3~69.6$\times$26.8~47.4 (av, 55.5$\times$37.1) ${\mu}{\textrm}{m}$. Sexuality of Phytophthora erythroseptica was homothallic. Oogonia were 30~46 ${\mu}{\textrm}{m}$ in diameter and oospores were 28~35 ${\mu}{\textrm}{m}$ in diameter, Elongated or cyclindrical antheridia were all amphigynous. This is the first report on potato pink rot caused by Phytophthora erythroseptica in Korea.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.468-474
• /
• 2010

In this paper, a VCHO(Voltage Controlled Harmonic Oscillator) for K-band application has been designed and implemented. The proposed oscillator has a structure of two hair-pin resonators placed on input and output of active device. Using in/out common frequency tuning structure, the VCHO yields some advantages of the enhanced fundamental frequency suppression characteristic as well as the improved output power of second harmonic. According to implementation and measurement results, it was shown that a VCHO provides an output power of -2.41 dBm, a fundamental frequency suppression of -21.84 dBc, and phase noise of -101.44 dBc/Hz at 100 kHz offset. In addition, as for the bias voltage from 0 V to -10 V for the varactor diode, output frequency range of 10.58 MHz is obtained with a power variation of ${\pm}0.19\;dB$ over its frequency range.

• Composites Research
• /
• v.23 no.2
• /
• pp.24-30
• /
• 2010

Interfacial evaluation and hydrophobicity of Ni-nanopowder/epoxy composites were investigated for self-sensing and actuation. Contact resistance and resistivity were measured using gradient micro-specimens. The actuation of the composites in the electromagnetic field was studied with three wave functions, i.e., sine, triangle and square functions. Due tothe presence of hydrophobic domains on the heterogeneous surface, the static contact angle of Ni-nanopowder/epoxy nanocomposite wasabout $100^{\circ}$, which was rather lower than that for super-hydrophobicity. The dynamic contact angle showed the similar trend of static contact angle. Ni-nanopowder/epoxy composite was responded wellfor both self-sensing and actuation in electromagnetic field due to the intrinsic metal property of Ni-nanopowder. Displacement of the actuator of Ni-nanopowder/epoxy composite was evaluated to obtain the maximum and the optimum performance using laser displacement sensor as functions of the wave type, frequency, and voltage. Actuation of Ni-nanopowder/epoxy composites also increased as functions of applied frequency and voltage. Actuated strain increased more rapidly at sine wave with increasing voltage compared to those of triangle or rectangular waves.

• Journal of the Korean Arthroscopy Society
• /
• v.1 no.1
• /
• pp.128-131
• /
• 1997

전방십자인대의 일차수복술이나 재건술후에 장기간의 비체중부하가 필요한지를 결정하기 위해서 일차수복술을 시행한 96례와 재건술을 시행한 82례등 총 178례를 대상으로 술후 체중부하시기에따라 두군으로 나누어 비교분석 하였다. 모든 례에서 술후 보조기를 착용하였고 120례에서는 술후 첫6주간 점차적으로 관절운동범위를 증가를 시키고 다음 6주간은 완전운동범위 회복상태에서 유지후 술후 12주에 체중부하를 허용하였으며 나머지 58례에서 술후 완전신전상태에서 즉시 체중부하를 시켜서 정기적으로 Lachman검사, KT 2000을 이용하여 불안정성여부를 관찰하였다. 평균 추시기간은 4.2년(2년$\~$6년)이었고 불안정성에 대한 평가는 AMA 분류에 따랐다. 최종추시상 모든환자에서 1+이상의 불안정성은 발견되지 않았으며 술후 12주에 체중부하를 한군에서 1a+가 104례$(86.7\%)$, 1b+군이 16례$(13.3\%)$로 관찰되고 즉시 체중부하를 한 군에서 1a+가 51례$(87.9\%)$, 1b+가 7례$(12.1\%)$에서 보였으나 통계적으로 의미있는 차이는 없었다(P>0.05). 본연구의 결과로 전방십자인대 일차수복술이나 재건술후 신전보조기를 착용시키고 즉시 보행을 시키는 것이 술후 슬관절의 불안정성에 영향을 주지 않으며 안전한 재활방법으로 생각된다.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1843-1845
• /
• 1999

We have investigated the dielectric characteristics of palmitic acid(PA), stearic acid (SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one (alkyl chain length). In this work. fatty acid systems were used as LB films and the status of the deposited films was confirmed by evaluating the transfer ratio. the UV absorption and the capacitance. Also, the dielectric characteristics such as the frequency-capacitance characteristics and the dielectric dispersion and absorption characteristics of PA, SA and AA through-plane were measured. The relative dielectric constants of PA, SA and AA LB films were about $2.6\sim4.6$, $2.4\sim4.1$ and $2.2\sim3.8$, respectively. That is, the relative dielectric constants were decreased in proportion to the chain length of methylene group. And, the dielectric dispersion and absorption of each fatty acid LB films have arisen from spontaneous polarization of dipole polarization in the range of $10^4\sim10^5[Hz]$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.850-860
• /
• 2000

The purposes of this study was to provide the fundamental data for children's wear standardizing sizes of ready-made clothes by analyzing the elementary school girls’somatotype. The subjects for anthropometic measurements were 434 elementary school girls’by age groups < ‘(1st age(1ㆍ2 grade)’,‘2nd age(3ㆍ4 grade)’, and 3rd(5ㆍ6 grade)’ > living in Pusan. According to the analysis of upper bodies by the age groups 1. According to the analysis to draw somatometric factors by the age groups, sevenㆍseven and six actors in 1st . End and 3rd age groups are obtained from measurements of upper body. 2. The 1st & 2nd age groups: As the result of factor analysis for the factor, the first and second factors which explain more than 70% of the whole variance represent“horizontal size”and“vertical size”, which characterize more aspects of the body shape of girls at elementary school ages. 3. The 3rd age groups: As the result of factor analysis for the factor, 6 factor which explain 74.39% of variance were extracted form anthropometic data. The first factor represented the items of circumference, breadth and depth related to“sectional size the front length of the upper body”, The second factor described the items of "heights & the back length of the upper body”.