• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.99-103
• /
• 1995

소음저감 설계기술은 제품의 경쟁력 향상을 위해 자동차, 항공기, 건설 장비, 선박, 심지어 가전 제품에 있어서도 소음 문제에 대한 관심이 크게 대두되고 있다. 특히 수출을 하기 위해서는 그 지역의 소음 규제법을 만족시켜야 하며 제품의 경쟁력을 위해서는 그 이상의 것이 요구되고 있다. 또한, 소음 문제는 소비자의 제품구매 선택에 영향을 주기도 한다. 일본의 경우 JIS 규격으로 건설 장비의 소음을 규제하고 있으며, 소음수준에 따라 일반 장비, 저 소음 장비, 초 저소음 장비로 구분하여 장비에 따라 건설 작업을 제한하기도 하며, 특히 초 저소음 장비 인증을 받은 것은 장비 사용 단가 및 사용에 있어 차등을 두어 혜택을 주고 있다. 본 논문에서는 현재 구미지역에서 소음규제로 사용되는 BITA 방식에 따라 지게차의 소음원 규명 및 소음 저감 대책을 논하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.236-239
• /
• 2005

본 연구에서는 정밀 측정/검사장비의 운영상 발생하는 에러의 원인을 규명하기 위함이다. C/R에 사용되어지는 정밀측정/검사장비는 장비 기초에 대하여 진동허용규제치를 장비 제작업체 제공한다. 이에 C/R 구조 및 장비 기초에 대하여 진동원 차단 방안등을 수행하게된다. 이러한 진동허용규제치를 만족시키기 위한 방안을 수행함에도 공조 소음등과 같은 요인에 의한 장비의 운영상 발생하는 진동과 관련된 에러를 규명하고 이를 제어하기 위한 연구를 수행하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.25-28
• /
• 2011

본 연구는 반도체 산업에서 반도체장비유지보수에 사용되어지는 반도체장비 유지보수 분야의 전문기술인력을 효과적으로 양성할 수 있는 반도체장비 유지보수의 자격종목을 개발하고자 하는데 그 목적이 있다. 연구의 목적을 달성하기 위하여 반도체장비 유지보수 분야의 국내외 실태 조사, 문헌조사를 통하여 반도체장비 유지보수 관련 교육훈련기관 및 검정 수요 예상 인력을 파악했으며, 유사자격제도(전자부품장착기능사, 전자부품장착산업기사, 생산자동화기능사, 생산자동화산업기사 등)를 분석하였고, 직무분석을 통하여 반도체장비유지보수기능사의 직무 및 교육내용을 분석하였다. 또한 반도체장비 유지보수 자격종목 신설에 대한 설문조사를 실시했으며, 반도체장비유지보수기능사 자격종목의 출제기준 및 채점 방법을 제시했고, 필기시험과 실기시험에 대한 모의 검정시험도 실시하였다. 이러한 결과를 토대로 반도체장비유지보수기능사에 대한 교육프로그램을 만들었으며, 자격검정을 실시할 수 있는 출제기준을 제시하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.489-492
• /
• 2007

전자의무기록(EMR)[1]을 도입한 이후 현재 의료장비의 EMR 연동상황이 극히 미비한 상태로 대두되고 있다. 종합병원 의료장비의 약 30%정도는 검사 결과물이 출력이 안되고 보여지기만 하는 구조로 되어 있어 직접 수기로 EMR 에 연동할 수 있는 소프트웨어에 입력하여 EMR 에 연동하고 있으며, 약 60%는 의료장비에서 프린터 혹은 시리얼통신으로 데이터를 출력할 수 있는 구조로 되어있다. 하지만 의료장비의 노후화 및 검사결과물의 인터페이스 특성이 다양하기 때문에 쉽게 연동하지 못하고 있으며, 대부분 종이 출력 결과물을 스캔을 통해 이미지를 저장하거나 받아서 EMR 에 연동하고 있다. 그 외 나머지 10%는 의료장비 자체의 저장장치 또는 네트워크를 통해 검사결과 데이터를 EMR 에 전송하는 구조로[2] 되어있다. 본 논문에서는 의료장비의 프린터를 통한 결과물을 EMR 에 연동하기 위한 인터페이스 솔루션을 구현하고, 검사결과의 출력 데이터를 이미지 복원 및 관리하는 방법을 통해 많은 수의 의료장비의 출력 데이터를 EMR 연동을 하여 인력 및 기타 사무용품의 소모를 줄이며, 검사결과를 실시간 진단할 수 있는 방법을 제시한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.322-333
• /
• 2019

The purpose of the current study was to investigate the level of market size and market share of domestic research equipments for analyzing the difference of the number and amount of construction by the manufacturing countries in the basic and analytical science fields based on the information of the research equipment invested by the Korean government for the past 14 years. As of January 1 2019, from 2005 to 2018, 20,687 research facilities & equipments (main equipment with a construction cost of 30 million won or more) built in the basic and analytical science fields were selected for this study and their components, standard classification, number of construction, and amount of construction by country of manufacture were analyzed. Differences of the number and amount of construction among manufacturing countries were tested using a single sample chi-square test and one-way analysis of variance, followed by Bonferroni's post-hoc test. As a result of this study, the number of construction (p<.001) and construction amount (p<.05) were statistically different for each manufacturing country. The level of market size and market share was significantly different according to the equipment standard classification (p<.05). Therefore, differentiated strategies of the government and policy research projects will be required for each type of equipment and amount in order to support the policy for the localization of research equipment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.139-147
• /
• 2016

This study described the design scheme for each step of the production test for the Fire Control System(FCS) of the K-55A1 PIP business of Hanwha Thales since 2011. From the time of receipt of the product It is necessary to improve the FCS's reliability by using the Unit Test, burn-In test, System Test. FCS of K-55A1 acts as a 'head' that control the self-propelled howitzer, and connected with the electrical and physical connection of self-propelled howitzer's multiple unit (Inertial navigation systems(IN), Muzzle Velocity Radar (MVR)) for the normal operation without an inch of error in operating. We designed the production testing equipment automatically as much as possible and designed with the environment similar to the self-propelled howitzer. by using this production testing equipment, It should help for the strengthen national defense of the Republic of Korea.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.891-897
• /
• 2004

This paper provided a simulation model for transport vehicles that carry container from the ship to yard block and vice versa at automated container terminal with a perpendicular yard layout. Usually, the efficiency of container terminal is evaluated by the productivity of container cranes at apron, and the stevedoring system for transport vehicles and yard cranes should be supported enough to improve productivity of container cranes. Especially, transport vehicle is very important factor in the productivity of container cranes and the performance of transport vehicles are changed according to the number and traveling type of vehicles. For these reason, a method that can estimate productivity of transport vehicle is required Finally, we developed the simulation model to analyze the productivity of transport vehicle and presented the productivity of container cranes for a varying operation of transport vehicles.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.1
• /
• pp.60-68
• /
• 2003

Now the development of using a internet and security equipment is Processed actively. But It is presented problems about compatability and availability between variable equipment as several protocol. It is able to occur the Problem which is not considered efficiency as monopoly security equipment for the standardization of some vendor As a using of VPN gateway equipment. the same equipments have been actually used only for sale a communication equipment which are not confirmed(authenticate) between of mutual equipments. These problem is remain which are not considered suitable network environment and Position by mutual authentication Processing. Because it is considered for only sale a equipment of several vendor. And You will be remain where is unable to protect from attack of using the same equipment, and You will need a actually Protected method. By authentication system of base on Pn , although there is an intended attack from the third intruder, users can be protected with safe from the physical attacks since he is not a Permitted user by employing CA-VPN gateway that is more viable than the previous VPN connection in its security and certification.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.310-317
• /
• 2009

Vertical wet equipment for the BGA develop process was newly developed substituted for conventional horizontal wet equipment. The benefits of vertical equipment are that the pattern damages generated by the collision between the patterns and transferring rollers can be eliminated because the direct contact between the equipment's transferring units and the soft dry film patterns does not occurs. Taguchi experiment was conducted to optimize the process characteristics for the vertical equipment. The experiment was organized as the smaller the better problem which includes adequate uncontrollable factor and controllable factors. The uncontrollable factors are the 4 sides of two panels which are loaded to the equipment at the same time. By the analysis of the experiment, temperature of the develop chemicals and develop spraying time are analyzed as the main controllable factors. Finally, line pattern's minimum width which is not damaged for the develop process was improved from $13.8{\mu}m$ for the horizontal equipment to $10.4{\mu}m$ for the vertical equipment. And dot pattern's minimum width is improved from $22.1{\mu}m$ to $16.3{\mu}m$.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.307-317
• /
• 2013

This study aims to investigate the research equipment establishing relationship by looking at research equipment information transfer that follows the network's structural and positional characteristics and the research institute's responsibilities to increase the possibility of research equipment usage by using the SNA(Social Network Analysis) method. Consequently, with the given structural characteristics of research institute, it can be concluded that because of its low density, it appears to be difficult to transfer research equipment information within the network. Government-funded research institutes that can effectively deliver research equipment information within the network system through comparison positional characteristics are ETRI, KITECH, KRICT, Sungkyungwan University, and Kyungbook National University. In addition, a virtualization node not only invigorates the network system but also acts as an intermediary factor to effectively deliver research equipment information. As results, there can be three conceivable alternatives to increase the possibility of research equipment usage. Those includes: 1. policy to encourage relationship building among research institutes 2. utilizing suitable institutes for effective delivery of research equipment information and lastly, 3. establishing a virtual intermediary institute for information sharing and utilization of isolated institutes' research equipments.