• Journal of Practical Engineering Education
• /
• v.16 no.2
• /
• pp.179-184
• /
• 2024

Printed circuit boards (PCBs) are a key component widely used in the production of electronic products, and not only quantitative growth but also qualitative developments such as integration cannot be ignored. Wave soldering equipment is commonly used equipment at manufacturing sites, but it is impossible to configure a dedicated equipment environment suitable for each PCB specification during the preliminary research and prototype development stage. It is neither suitable for development within limited time line nor manufacturing various product groups because only equipment setting conditions can be changed within a given time. In this study, we introduce a case of introducing a PCB pallet to enable selection of optimal process conditions within the limited environment described above. In addition, by presenting a discriminant that can determine in advance whether production is possible with current general-purpose equipment, it is expected that problems that may arise due to limitations in the general-purpose wave soldering equipment environment can be identified and resolved in advance. Ultimately, this palette makes it possible to shorten the development period and improve productivity.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.381-388
• /
• 2015

Global Maritime Distress and Safety System (GMDSS) equipment and Electronic Chart Display & Information System (ECDIS) are typical equipment which help seafarers to obtain information for ship's safe navigation. In this study, a survey on using of GMDSS equipment and ECDIS was conducted on a total of 260 ship masters and crew who have been working on ocean-going vessels. The subjects were asked about the usage, and level and reason of satisfaction or dissatisfaction of GMDSS equipment and ECDIS, the leading navigational system from which they receive information. The survey showed that the third- and fourth-most frequently used equipment, MF/HF and INMARSAT (telex), were deemed to be the second- and third-most useless equipment. It means that the frequency of device usage is not proportionate to the level of navigational safety. Especially, 'ease of device use (42.3%)' and 'necessity of the provided information (50%)' were highlighted as factors increasing the level of satisfaction with the system. The survey result shows that ship safety cannot be realized by only adopting advanced systems, technology and services. It emphasizes the need to consider the level of 'accessibility and appropriateness of the information' and 'ease of device use'. Discussions implemented by the IMO on various policies and regulations are aimed at securing ship safety. In order to achieve the goal, such institutions should be validated by end-users and relevant studies should be conducted.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.271-277
• /
• 2013

The subjects of this study were the patients of H Dental Hospital in Busan, who visited for the purpose of treatment in patients over 18 years of age and 151 patients, analyzed the data of the results of the selection criteria of the dental health care consumer. The gender of the subjects by cross-analysis, importance order of selection criteria for dental hospital were cleanness and hygiene(78.1%), equipment and facilities(60.9%), career and word-of-mouth(57.6%), staff kindness(57.6%), ease of use(32.5%) and scale of dental hospital(22.5%), it was appeared similar in comparison of cross-analysis and average-analysis. Major consideration of the study subjects to select criteria for dental hospital was pain control(31.8%), infection control(30.5%), cost(29.8%), time(7.9%) respectively. Gender as a primary consideration to the part of a man in pain control(39.2%), women cost(39.1%) was most common (p<0.001). In dental health care consumer to select criteria, clean hygiene and infection control at the heavily appeared to affect the direction of change in the consciousness of consumers seeking and it is necessary to improve hospital services for the dental care of their qualitative changes.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.605-613
• /
• 2014

The purpose of this study is studying the relationship among experience choice, experience effect and experience satisfaction of marine leisure sports for the vitalization of marine leisure tourism. After preparing a questionnaire, investigation and analysis were done by visiting Boryeong area. The result of the study is as following. First, it was found that the major cause of choice in marine leisure sports has positive impact on choice satisfaction. Second, it was found that the major cause of choice has positive impact on experience effect. Third, it was found that the choice satisfaction in marine leisure sports has positive impact on experience effect. Fourth, it wa s found that the marine leisure sports visitors like motor boat, banana boat and yacht experience. Fifth, it is suggested that an equipment rental desk, safety facilities and marine leisure experience facility included in a marine leisure experience center to be built.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.251-260
• /
• 2020

Unlike manned aerial vehicles, because an unmanned aerial vehicle (UAV) has a limitation which allows only remote test during flights, it is very important to maintain the high reliability of the vehicle through pre- and post-flight tests. To this end, this paper designed an air vehicle test equipment (AVTE) for UAV which meets the derived hardware and software requirements. Based on this design, the AVTE was implemented in accordance with the actual test scenario. The implemented AVTE has the advantage of reducing the time and cost required for the test of UAV by allowing the operator to perform automatic or manual tests for necessary parts in various situations such as before and after starting engine and pre- and post-flight tests. Furthermore, this study is expected to help with the design and implementation of AVTE for other UAVs.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.157-163
• /
• 2002

The aim of this study is to establish an evaluation function that can be used in comparison of alternative layouts by quantification of particularities of arrangements. The machinery arrangement is a design phase that decides the location of various equipment in a compartment to make the most of the function of every components and to meet the limit of ship space at the same time. In case of the ship, Only one of the several alternative layouts is selected. This process depends on the experience, knowledge, and judgement of an expert and, as a result of it, it's hard to get an objective evaluation. Therefore, according to quantification by using the fuzzy theory, we suggest a standard that can objectively evaluate alternative layouts.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.430-433
• /
• 2011

산불 진화에 사용되는 지상 주력 장비를 대상으로 수원으로부터 호스 거리 및 고도에 따른 성능을 정량화하기 위한 현장 적용 실험을 실시하였다. 대조군으로는 담수지 형태의 수원을 사용하고 수원으로부터 고도차가 40m 수준인 예비실험을 대상으로 성능값을 비교하였다. 본 현장 적용 실험에서는 산림 내 계곡지를 수원으로 하였으며, 고도차가 150m 로 예비실험의 3.75배인 지형을 선택하였다. 고도에 따른 영향이 크지 않은 예비 실험과 비교하였을 때 고도가 높아질수록 동일 거리에서 측정한 성능값은 평균 50% 이상의 감소를 나타내었다. 그러나 수평 및 수직 거리는 20% 이내 수준의 감소를 나타내어 진화에 큰 장애 요소로는 작용하지 않았으며, 펌프압력은 소형펌프의 압력 상승이 가장 큰 상승률을 나타내었다. 이와 같은 결과는 수원의 형태에 따라 용수 공급차에 기인한 것으로 안정적 용수공급 저하, 펌핑압 부하 증가, 이물질 삽입 등이 원인인 것으로 사료되며, 고도에 따른 영향 인자도 반영된 것으로 해석된다. 또한 실험을 통해 진화장비별 실제 진화대원의 적정 사용거리와 거리별 적정 소요인원을 산출할 수 있었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.167-175
• /
• 2007

The relations between data from test methods and conditions in structural elements are considered. NDE(Nondestructive Evaluation) methods are joint application of a test and a basis for interpretation of data obtained in the test. Correct assessments of conditions of elements depend on the inaccuracy and variability in the test data and on the uncertainty of correlations between attributes(what is measured) and conditions(what is sought in the inspection). A full description of the performance of NDE methods considers the relation of test data to condition of elements. The quality of the test data itself is important, but equally important is the interpretation that occurs after the test. To make the decision of the performance of NDE methods, this paper presents mathematical basis to measure the reliability of NDE methods.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.93-98
• /
• 2010

본 연구에서는, 반도체, LCD 공정에서 금속막을 증착하기 위하여 PECVD장비에 화재, 폭발 위험성과 독성을 가진 Silane가스를 사용하게 되는 장비인 gas cabinet, pipeline, VMB(Valve manifold box), MFC(mass flow controller)장비 등, 전반적인 시스템에 대하여 영국 HES의 ALARP개념을 도입하여 위험성 평가를 실시하여 문제점을 도출하고 대책을 강구 하는데 목적이 있고, 여러 가지 문제점중 절대적으로 수용 할 수 없는 Critical Risk로는 Gas Cylinder를 사용하여 Silane을 공급하고자 할 때에는 필히 Gas Cabinet을 사용하여 공급하여야 하고, Tube Trailer를 사용하여 공급하고자 할 때에는 필수적으로 Purge System을 갖추어 공급하여야 한다. 선택적으로 수용할 수 있는 High, Medium Risk로는 Gas Cylinder 또는 Tube Trailer를 사용하여 Silane을 공급하고자 할 때는 Inlet 부분에 RFO(Resticted Flow Orifice)를 설치하여 사용하고 Gas Supply Room에는 CO2소화설비를 적용하지 말고 Water Mist등 물 분무설비를 적용하여야한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.256-258
• /
• 2014

현재 우리나라 무대조명 업계내의 시장은 시간이 흐르면서, 조명개발이 더욱 화려하고 실용적인 장비들로 개발되고 있다. 다양한 개발에 앞서 무대조명 등기구의 광학적, 상용적 그리고 구체적인 테스트 방법의 기준이 전무한 상태이다. 업체별로 많은 기준들을 선보이고 있지만, 선택하는 이용자에게 혼란만 야기되므로 통일되고 규범화 시킬 필요성이 있다고 생각한다. 그래서 무대 등기구 가운데 무빙라이트에 대하여 국내외적인 등기구 측정방법과 시스템 구조기술에 대한 내용 중 광학적 성능, 소음제어, 온도제한의 조건 등 대하여 간략하게 제시하고자 하며, 이를 바탕으로 무대조명 장비의 표준화 형성에 도움이 될 수 있도록 제안하였다.