• Journal of the KSME
• /
• v.23 no.6
• /
• pp.434-439
• /
• 1983

본 해설에서는 열.유체실험의 기본을 이루는 온도, 압력 및 속도등을 측정하고자 할 때 필요한 측정기기, 측정방법의 여러종류와 각 측정법간의 차이 및 장단점등을 설명하였다. 열.유체 분야에서 연구 및 교육에 종사하는 회원들이 기존 도입시설을 사용하거나 혹은 부속기기를 보충하고 새로운 장비를 선정, 도입코저 할 때 조금이나마 도움이 되었으면 하는 생각에서 어느 특정 기기보다는 온도, 압력 및 속도등 기본 측정에 대하여 총괄적으로 실제적인 면을 생각하며 설명하고자 노력하였다.

• Defense and Technology
• /
• no.4 s.158
• /
• pp.50-58
• /
• 1992

분산/병렬처리기법은 중앙집중식 또는 순차적 처리기법에 비해 장비의 신뢰성 및 신속성이 매우 증대되기 때문에, 군사적으로 사용되고있는 각종 통신.전자무기체계에서의 적용 필요성은 두말할 필요도 없다. 따라서 이러한 요구에 대비해서 분산/병럴처리기법의 중요성을 이해하고 각종 군사용 시스템을 선정 및 설계할 때에 이 글의 제안이 참조가 되기를 기대한다

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.223-230
• /
• 2017

BIM(building information modeling) has been actively applied to construction industries and to maximize its application through the life cycle of structure, various relevant technologies have been proposed. In particular, 4D sequencing management and 5D cost-related management were introduced as an improved version of the design review and interface control by 3D information design. On the other hand, the virtual construction using virtual construction equipment can sophisticatedly handle capacity, dynamic movement, collision boundaries of actual construction machines but it still stays at a low level in a technical sense. In this study, simulation systems based on BIM involving virtual construction equipment have been developed; then it is applied to the actual construction project to evaluate the safety and efficiency of construction equipments. It was confirmed that the simulation systems can be utilized to construct virtual construction site by using an effective 3D library of construction equipment and can plays a key role to secure construction safety and economic feasibility. Specifically, the simulation system are very useful for decision making by construction managers to select the optimum equipment and construction method with a better understanding for safety and cost-saving.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.561-564
• /
• 2014

The Rare Isotope Science Project (RISP) at the Institute for Basic Science (IBS) constructs the rare isotope accelerator facility in South Korea. Since the accelerator control system uses various Ethernet-based devices and equipment, it is essential to build a unified Network-based control system. Because of the complexity of the accelerator facility, it will be a challenge to install a device in a proper location where the device could react quickly and exactly with respect to network security. In this report, we will present early study on Simple Network Management Protocol (SNMP) that tests various Ethernet-based devices out on an ideal network configuration in order to find an optimal location for each Ethernet-based device. Moreover, we will discuss future plan to integrate SNMP into Experimental Physics and Industrial Control System (EPICS) that is distributed soft real-time control systems for scientific instruments such as a particle accelerators, telescopes and other large scientific experiments.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.48-58
• /
• 2022

This study tried to assess the applicability of a hand-held LiDAR for measuring the geometric structures of forest trees including diameters at a breast height(DBH) and tree height(H). A traditional method using tapelines was conducted to analyze the accuracy of the LiDAR instrument in the Taebaeksan national park in South Korea. Four statistical indices which are bias, root mean square error, mean absolute error, and correlation coefficient were employed to compare the measurements by the LiDAR instrument and traditional method. The DBHs from the LiDAR were very similar to those from the traditional method. And it indicated that the LiDAR is sufficient to be a alternative of a traditional method. However, there was a limitation in assessing the accuracy of LiDAR for measuring tree height by comparing the measurements by observer's eyes since they included different error sources. Further study is needed to assess the accuracy of LiDAR instrument for tree height through more reliable measurements.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.142-150
• /
• 2008

In order to ensure the individual and mutual performances among the telemetry system, tracking system, flight termination system, GPS, and inertial navigation & guidance system which are installed in the KSLV-I 2nd stage and ground equipment of the Naro space center, flight test using a light airplane is required. Since the high degree of test efficiency is fulfilled through the minute plan and analysis about selection of the equipment which are applicable to the test, harness, operation strategy, and antenna installation. KSLV-I communication environment and flight profile should be precisely taken into account during the flight test. In this document, overall aspect of the KSLV-I 2nd stage equipment specification, a rack for the installation, harness, the airplane specification, and flight route which are required for the effective flight test are presented.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.201-206
• /
• 2019

The purpose of this study is to identify and manage the problem of components discontinuity in the future based on the implementation of information systems to solve the problem of discontinuance of militaries parts, so as to solve the problem of discontinuance of components in the operation of the weapon systems and reduce excessive expenditure due to aging of the weapon system. The purpose is to prevent the discontinuance of components in the future by up-dating the production phenomena of parts manufactures periodically. Defense industries and R&D perood can expand users convenience by supporting selection of more efficient parts in weapon systems development and information of vast components information systems.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.53-59
• /
• 2019

LIBS plug, a simplified laser-induced breakdown spectroscopy(LIBS) device with the purpose of measuring the fuel distribution inside the combustion chamber, was developed and manufactured. The LIBS plug receives only two wavelengths (H:656.3 nm, O: 777 nm) that are closely related to the equivalence ratio in the overall spectrum. The calibration curve between the signal of the LIBS plug and the equivalence ratio was constructed, and the fuel distribution of gasoline-air and LPG-air mixtures was measured using the LIBS plug.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.28-36
• /
• 2020

To enhance the recycling rate of wasted glass bottles toward recycled aggregates, the study would decide optimal comminution equipment based on the particle size distribution, aspect ratio and equipment energy analysis. The impact, compress and abrasion is type of generated force by comminution. So, hammer crusher, shredder, roll crusher and ball mill have been selected because they have characteristic which is each type of force. As a result of the particle size analysis of each product, only the shredder product satisfied concrete and asphalt aggregate quality standard condition. Also, as a result of aspect ratio analysis using Imaging software program (Image J, National institute of health), most of size fraction is confirmed under 1.6 value. It was confirmed that the product has low dangerousness and satisfying to shpage index. Also, the particle reduction ratio against input energy of shredder product was the most high. Therefore, we can decide that the optimal equipment which applicable for comminuting waste glass bottle in certain particle size under 10mm is shredder. The result of study will make contribution to increasing energy efficiency of comminution processing and competitiveness of product.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.75-94
• /
• 2011

This paper is concerned about applying the AHP(Analytic Hierarchy Process) for a priority analysis of equipment operation plan to improve productivity of the container terminal in Gwangyang port. In this study, main elements of container terminal are assumed as into yard equipment area, transport equipment area, berth equipment area and C/Center area. A questionnaire is used to collect the opinions of equipment operating department and operational planning department. On the whole, the result of the analyses reveals that the most important area is yard equipment area. Examining each department is responses, equipment operating department preferred the C/Center area to other areas, on the other hand, operational planning department preferred yard equipment area. The result of this study suggests some guidelines for deciding priority of operation plan in the container terminal.