• Journal of Sericultural and Entomological Science
• /
• v.35 no.2
• /
• pp.105-113
• /
• 1993

To produce F1 hybrid of silkworm sex discrimination has to be followed at the pupal stage by sexual organ. However it requires a lot of labour and may bring about a wrong classification. In these regards, this study has been implemented to find out an effective measure for the pupal sex discrimination by use of variation of cocoon weight and image analysis of cocoon. As a result, it was found that in case of the pupal weight the percentage of a wrong classification fell on 0.3% and in case of single cocoon weight 0.4%. The discrimination rate was 99% in the weight variables of cocoon but analysis by single cocoon weight and cocoon shape variables, it was 98.7%. Efficiency of discrimination was increased by 2.7% as compared to variable of single cocoon weight. The minimum cocoon sampling size may be 15 cocoons sexual-wise.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.67-77
• /
• 2011

To classify the relationship between riparian vegetation type and bird habitat, we studied the vegetation and avian species in the three streams(Anyang Stream, Gap Stream, Seom River), located in middle province. Five different vegetation types - Woodland type, Shrub type, Tall and wet grassland type, Low and dry grassland type and Cropland - were identified. The habitats of avian species were highly correlated with vegetation type. Streptopelia orientalis and Hypsipetes amaurotis were found in woodland. Both Paradoxornis webbiana and Phoenicurus auroreus were mainly found in shrub. Tall and wet grassland were preference habitats of Ixobrychus sinensis, Acrocephalus arundinaceus, while, low and dry grassland were occupied by Phasianus colchicus, Falco tinnunculus. Cropland were used as breeding and feeding sites for Egretta alba modesta, Anas poecilorhyncha, Anthus spinoletta. Distribution patterns of avian species were clearly divided by vegetation type and site characteristics in the stream.

• Applied Biological Chemistry
• /
• v.26 no.1
• /
• pp.47-52
• /
• 1983

The size distribution and changes of volume and grain hardness of ‘Sedohadaka', waked barley of various polishing yields during hydration process at various temperatures were investigated, and were analyzed kinetically, Both major and minor diameter of barley grain decreased linearly during polishing, and the decreasing rate of major diameter was greater than that of minor diameter. The volume change of barley grain could be expressed as a power of hydration time, and a break point was found in case of non-polished barley. The changing rate of grain hardness followed the equation of a first-order reaction, and the reaction rate constant increased with decreasing polishing yields and at higher temperature in the range of $20{\sim}60^{\circ}C$. The activation energy of hardness change reaction of polished barley during hydration were ranged $5.1{\sim}7.8Kcal/mole$, and 13.3Kcal/mole of non-polished barley.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.577-585
• /
• 1995

This study has been performed to determine whether significant differences in the maxillary basal bone pattern exist between skeletal class II malocclusion and normal occlusion. Materials for the skeletal Class III sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 29 adult individuals, 15 males and 14 females. The average age was 19.75 years with a range from 16.4 to 29.1 years. A normal control sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 24 adult individuals, 13 males and 11 females. The average age was 24.25 years with a range from 20.8 to 29.4 years. The results of this study can be summarized and concluded as like follows. 1. In comparing sexual difference of maxillary basal bone morphology in skeletal Class III malocclusion, the following Parameters of males were found to be significally larger than those of females : inter first premolar width, inter molar width, oblique canine height, oblique molar height and maxillary basal bone perimeter. 2. In comparing sexual difference of maxillary basal bone morphology in normal occlusion, the following parameters of males were found to be significally larger than those of females : inter canine width, inter first and second premolar width, inter molar width, oblique canine height and oblique molar height. 3. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion md normal occlusion in males, the following parameters were found to be significally larger in normal occlusion : inter canine width, inter canine height, inter molar height, oblique canine height and oblique molar height. 4. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion and normal occlusion in females, the following parameters were found to be significally larger in normal occlusion : inter canine height, inter molar height, oblique canine height, oblique molar height and maxillary basal bone perimeter.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.105-117
• /
• 1997

This investigation examined the effect of lateral shift of mandible from functional occlusal interference on the growth of mandible and the growth pattern of mandible shown after the removal of occlusal interference. The followings were performed with the results below : the changes in mandible and condylar cartilage were studied in the experimental group with upper right, lower left incisors cut for 2 and 4 weeks- an 4-week-old rats and the experimental group which had cut for 4 weeks and suspended for 2 weeks. 1. In the 2-week experimental group, the left mandibular length, condylar length, mandibular height and condylar area seemed smaller than those on the right and the normal group ; the right mandibular length and condylar area were smaller than the normal group. 2. In the 4-week experimental group, left condylar area was smaller than the right, but due to the quick changes in adaptability of left mandible, right and left mandibular lengths were similar. compared with the normal group, however, mandibular length and condylar area still remained small. 3. In the 6-week experimental group, the left and the right appeared similar with the mandibular length remaining still shorter than the normal group. 4. In the sagittal plane, the proliferation of the cartilage layers of the left condylar cartilage of the 2-week group appeared to have general repression compared with the right and the normal group. The right side also showed repressed growth compared with the normal group. In the 4 and 6-week groups, however, it was similar to the normal group. 5. In condylar cartilage volume, no significant difference was noted in the comparisions of left and right of the experimental group, nor in the comparison of the same sides of experimental wand normal groups. Based on the above, in case of contralateral incisal cutting in rats, it was observed that the growth of mandible and condyle of the cutting side was repressed, at the same time, the quick adaptability led to similar changes of growth in left and right mandibles. But judging from the similar phenomena throughout the whole experimental period in the changes of condylar cartilage volume in the experimental, right and left, and normal groups, the general overall growth of condylar cartilage was found unrepressed. It was also recognized that the growth of condylar cartilage can take in various directions.

• Journal of Aquaculture
• /
• v.10 no.4
• /
• pp.449-456
• /
• 1997

This study was concuted to determine the optimal conditions for raising the freshwater rotifer, Brachinus calyciflorus. The authors presented some biological informatin obtained from incubation experiment under the various controlled temperatures. Lorica size of the rotifer was divided into two groups : the length and the width for the S-type was $141.0\pm16.7\mu m$($110.1-182.5\;\mu m, n=44$)and $107.0\pm20.3\mu m\;(75.3-152.3\mu m, n=44)$, and those for the L-type was $262.8\pm15.2\mu m\;(234.4-288.6\mu m,\;n=20)\;and\;182.6\pm13.4\mu m (159.8-207.0\mu m,\;n=20$), respectively. The number of eggs being attached on the female varied from 1 to 11 at various culture conditions. Egg type was divided into two groups, large and small. Large and small egg was measured in its major axis as 85a.7-107.8$\mu$m and 55.1-65.2$\mu$m for S-type, and 104.9-121.8 $\mu$m and 62.8-89.1$\mu$m for L-type respectively. The maximum density was reached at 4th day after incubation. The density was 583.9 rotifers/$m\ell$ for $25^{\circ}C$-experimental. group and 421.3 rotifers/$m\ell$ for $22^{\circ}C$-experimental. group respectively. In the case of $28^{\circ}C$-experimental. group, it suddenly decreased into 4.7 rotifers/$m\ell$ at 1st day after incubations and did not recover to its initial density. The maximum rate of increase of populatin per day was reached 0.802 for $22^{\circ}C$-experimental. group at day 2 and fluctuated thereafter. For $25^{\circ}C$-experimental. group it increased to 0.964 at day 3 of incubation and then declined. And the egg ratio of female was reached the maximum of 0.614 for 22$^{\circ}C$- at 3rd day and 0.772 for $25^{\circ}C$-experimental. group at 4th day of incubation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.69-79
• /
• 1997

We investigate both of central and dispersion tendencies of the observed test statistics in control charts in order to judge whether a production process is abnormal or not. In order to do it, first, we study about detection of changes of the population mean as a central tendency The $\bar{x}$ and x control charts are used for detecting the change of the population mean $\mu$. We shows the probability detecting the change of population mean using the $\bar{x}$ and x control charts. Secondly, we study about detection of changes of the population standard deviation as a dispersion tendency in the s control chart. In our studies, for the given several parameters the detection probabilities of changes of central and dispersion tendencies are calculated, the necessary sample size values n are suggested for detecting the changes, and their informations are given as various tables.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.199-202
• /
• 2000

Speaking Rate has variety depends on the situation and habit of speakers. It has been many studied about speaking rate In speaker recognition. The study of speaking rate in speech recognition is one of considerable matter when It is recognized the speakers and it is measured by many speech data base and complicate estimation for accuracy. In this paper, conventional vocoder process the speech signal when encoding and transmitting without regard to speaking rate so in order to apply the speaking rate for vocoder It should be considered the simpler algorithm and less computation amount than the conventional method of speaking rate used In speech recognition. We proposed the speaking rate algorithm which is used the simple parameter with Line Spectrum Pair (LSP). The proposed peaking rate method is measured by the information of LSP in speech. We measured the variety rate of phenomenon about utterances which have different velocity, respectively. As a result, It has distinct variation rate of phenomenon between utterances uttered fast and slow and the rate is 42.8% higher in case of uttered fast than in case of uttered slow.

• Journal of Korean Society for Quality Management
• /
• v.11 no.1
• /
• pp.18-23
• /
• 1983

Continuous sampling plans CSP-1(i,f)'s with which AOQL is guaranteed, can be applied to the cases in need of effective sampling without stopping the process or dividing batches during production. But the plans that can guarantee the same AOQL value are too many. Therefore we have to select one plan among them. There may be a lot of ways to choose it. This paper connects with various sampling costs, the concept to try to detect the shift of process average under fractional inspection in CSP-1,to find a minimum cost sampling plan among several CSP-1 sampling plan alternatives (i, f)'s with the same AOQL value.

• Journal of Korean Institute of Industrial Engineers
• /
• v.5 no.2
• /
• pp.57-69
• /
• 1979

This review focuses on the individual performance and productivity of researchers in the area of science and technology. The researchers in the paper are classified into individual inventors without organizational affiliation and researchers in the organization, which are distinguished by cosmopolitanic professionals and local institutionalists. The productivity of researchers is in general measured by different indicators or measurement scales such as: i) subjective evaluation of overall research performance, (ii) the number of published papers, reports and books, iii) the quality of research output (e.g. citation frequency), iv) originality of research ouput (e,g, patents), v) multiple measurement scales, etc. According to the literature based on empirical study, the productivity of individual reseachers is positively related to the degree of freedom, communication, diversity, dedication, and motivation and negatively related to the degree of similarity, and satisfaction. However, other factors such as creativity, age, supervisory behavior and group characteristics have shown irregular direction of correlation.