• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2001년도 제18차 정기총회 및 학술발표 PROCEEDINGS
• /
• pp.104-106
• /
• 2001

계란의 판매전략에는 $\ulcorner$제품개발$\lrcorner$ 과 $\ulcorner$판로개척$\lrcorner$ 의 두 가지 길이 있으며 이러한 전략적 대응이 필연적으로 성공하고 있다고는 할 수 없다. 판매 노력에 관한 평가는 앞으로 경영진단의 과제가 될 것이며 어느 것을 선택하느냐에 따라서 경영별 유리성은 격차가 더욱더 커질 것이다. 최근 시장개방화와 만성적인 생산과잉에 의한 수익성의 악화로 농가부채 증가 등 채란 양계 경영에 많은 어려움을 겪고 있는 실정이다. 한편 이러한 가운데서도 저 난가의 대응책으로 고부가가치, 상품차별화에 의한 신제품 개발, 판로개척 등 수익성 확보로 맞서고 있는 경영을 볼 수 있다. 앞에서 말한바와 같이 경영구조를 비교 분석한 것을 종합해보면 저 난가 구조하에서 살아남을 수 있는 길은 생산비절감도 중요한 비중을 차지하겠지만 무엇보다도 가격에 대하여 어떻게 대응할 것인가라는 전제하에 도매보다는 소매의 비율을 높인다든지 제품개발(상품차별화)을 통한 고 부가가치의 방향으로 나아가야 할 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.497-498
• /
• 2006

Tribological properties of a Magneto-Rheological(MR) fluid in a polishing process are studied. For this polishing process, abrasive wear model is proposed as a function of shear force, normal force and actual mean velocity of MR particles at workpiece surface. Experimental conditions are changed by varying the gap distance between workpiece and tool and the rotational speed of tool. From the experimental results, a modified Stribeck curve is obtained, and the friction coefficient turns out to have linear relationship with a modified Sommerfeld number. The validity of the wear model is supported by additional experiments performed for measuring material removal rates.

• 정보저장시스템학회논문집
• /
• 제3권2호
• /
• pp.66-72
• /
• 2007

Surface finishing using magnetorheological (MR) fluid is useful to finish small but not too small workpieces such as those in a few millimeter scale. However, due to the high surface hardness, this finishing process does not seem to be suit for applying to a hard disk slider. In this work, a preliminary study is performed on the finishing of the hard disk slider surface with a mixture of an MR fluid and diamond powder. During a wheel type MR finishing process, centrifugal force is found to be a major factor to cause a reduction in material remove rate (MRR), which is supported by a theoretical model. To facilitate this founding, the rotational speed of tool is confined to 500rpm while a rectilinear alternating motion with the mean speed, which is equivalent to the rotational speed, is additionally applied to the workpieces. As a consequence, MRR of about 2 times of the sole rotational case is obtained. This paper shows that MR finishing process can be used to polish a hard material in millimeter scale efficiently by controlling the speeds of the tool and the workpiece.

• 대한두경부종양학회지
• /
• 제10권2호
• /
• pp.157-162
• /
• 1994

It is the purpose of this paper to determine the relative frequency of the neoplastic vs. non-neoplastic disease in a series of surgically removed parotid and submandibular masses. The study was conducted a retrospective review of 249 consecutive, operated patients' records seen over a 9-year period from 1985 through 1993 at Department of Otolaryngology-Head and Neck Surgery, Korea Cancer Center Hospital. One hundred and fifteen patients had parotid mass and 134 patients had submandibular mass. All the specimen surgically removed were studied histopathologically. The numbers and percentages of patients are reported along with a pathological classification of the lesions encountered: neoplastic(benign, malignant) and non-neoplastic (inflammatory, non-inflammatory). There were 59 benign, 46 malignant, 6 inflammatory, 4 non-inflammatory in 115 parotid mass, and 33 benign, 48 malgnant, 47 inflammatory, 6 non-inflammatory in 134 submandibular mass. One-hundred-eighty-six of entire 249 patients had tumor involvement, for a 74.7% incidence of neoplasia. There was a neoplastic predominance in parotid mass(91.3%) and a relative inflammatory predominance in submandibular mass(35.1%).

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.181-192
• /
• 2015

The health care markets are rapidly expanded due to population aging, increasing incomes, strengthening assurance of health insurance and so on, and the competition in the markets is getting serious. In the industry, hospitals have played more important role than any others, where doctors, nurses, medical technicians, administrative staff, etc cooperatively works hard. Among them, nurses capture 40 percents of specialized hospital workers and their role for patients as customers is essential. Therefore, it could be one of the most important keys to increase the productivity and wellbeing of nurses with respect to enhancing efficiency and competitiveness of operating hospitals. In this paper the impact of nurses' job satisfaction, job stress, burnout, and organizational citizenship behavior on their productivity is studied. The subjects were 576 nurses in 20 different hospitals in Seoul, Kyounggi, etc. We held hypotheses and statistically tested and analysed them, using SPSS 20.0 software. Thus, we found various significant results(p<0.05), and they will give useful suggestions for managing nurse manpower and enhancing their productivity.

• Ocean and Polar Research
• /
• 제32권3호
• /
• pp.267-268
• /
• 2010

Many countries has been interested in studying the East Sea to look ahead into the world oceans' future, since the East Sea has been known as a miniature ocean. In this respect, PICES decided the East Asian Seas Time-series (EAST) studies, and the East Sea as the first subject (EAST-I). Since 2006 Ministry of Land, Transport & Maritime Affairs, Korea has supported the Korean EAST-I program. Through the Korean EAST-I program, 44 research papers were published in various scientific journals. This special issue contains 6 research articles including results from the interdisciplinary observation in the summer, 2008. Those articles cover the entire East Sea from the Korea Strait to the Japan Basin, and also cover the studies of the euphotic layer to the bottom sediment. MLTM and KIMST have provided full support to EAST-I program. KHOA carried out the joint cruises in the Ulleung Basin. Those are deeply appreciated. Finally, we would like to express our gratitude to the editorial board of Ocean & Polar Research.

• 치과방사선
• /
• 제25권2호
• /
• pp.281-286
• /
• 1995

Tooth length determination is a crucial step in endodontic treatment. Traditionally, radiographs are used to confirm working length of the root length. This study was performed to evaluate the radiographic distortion(magnification) and calculate correction coefficients for the object-film distance. Ninty-six radiographs were made of eight extracted teeth(two upper first premolars, two lower first premolars, two upper first molars, and two lower first molars) by using the 16 inch long cone paralelling techniques with 1mm interval from 5 to 16mm tooth-film distance. The results were as follows. 1. The least mean radiographic distortion from 5 to 16mm tooth-film distance was 2.42±0.68％(the length of mesiobuccal cusp-mesial root of lower first molars), the greatest distortion was 4.74±1.36％(the length of mesiobuccal cusp-mesiobuccal root of upper first molars). 2. The greatest correction coefficient was 0.986(the mesiobuccal cusp-mesial root of lower first molars, the lowest one was 0.937(the mesiobuccal cusp-mesiobuccal root of upper first molars).

• 산업경영시스템학회지
• /
• 제25권3호
• /
• pp.16-27
• /
• 2002

This paper is mainly interested in customer's(fan's) royalty to professional sports in sports industry. The royalty is studied with the royalty to several products and a service, so that we can obtain the comparison between both the former and the latter royalty. Interested professional sports, products and service are baseball, basketball, soccer, beer, cu, cola/cider, etc, and we will call each of them 'item'. The seven related hypotheses are considered. In hypotheses the dependent variable is royalty to nine items, and the independent variables are rune items, and customer's sex and major. For testing hypotheses, a questionaire is used, and reliability is checked with Cronbach's Alpha and correlation coefficients. For some items the royalty is significantly strong. Rather, even if some item has bad quality, it is found that customers can be royal to that item. We can identify some of those items through the results of this study. The strong significant results will be useful for the customer management. Additional studies are required for nonsignificant results which seems to be useful, and they are noted in the final part of the paper.

• 산업경영시스템학회지
• /
• 제30권1호
• /
• pp.25-32
• /
• 2007

Automobile manufacturing companies should provide the products and service that can satisfy consumers who usually want various kinds of automobiles. This paper studied the relations among several demographic characteristics(gender, age, occupation, income) of consumers and automobile's attributes(engine performance, engine displacement, price, maintenance expenses, color, etc.) and preferred automobile(kind, size, company, price). For the relation research we established a model and related hypotheses and used a questionnaire survey, where 350 subjects were questioned. After the analysis, many statistically significant results are obtained : consumer's gender has relations with the preference for engine performance, engine displacement, price, color, and design; age has relations with the preference for engine displacement, maintenance expenses, free checking during A/S period, etc., occupation has relations with the preference for engine performance, engine displacement, price, maintenance expenses, fuel efficiency, etc. : income has relations with the preference for engine performance, engine displacement, price, maintenance expenses, mileage, reputation of car manufacturing companies, etc.; price and fuel efficiency has relations with the preference for car manufacturing companies. These results suggest the consumer-oriented sales of automobiles and are expected to be helpful for the effective strategy development of automobile marketing.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 동계 학술대회 논문집
• /
• pp.79-85
• /
• 2002

본 연구는 대추 수확기개발을 위한 기초연구로써 대추의 열매, 잎, 잎줄기의 물리적 역학적 특성을 조사.분석하였으며, 그 결과를 요약하면 다음과 같다. .대추 열매의 평균 장경, 경, 부피, 무게, 탈과력은 각각 32.02 mm, 23.9 mm, 10.0$\times$$10^{-6}$m$^3$, 5.2~12.8g, 5.7 N으로 나타났다. .대추무게가 증가하면 탈과력은 증가하고, F/W는 감소하는 경향을 나타났다. .대추나무가지의 평균 탄성계수는 7.01$\times$$10^{8}$ N/m$^2$였고, 가지의 굵기가 증가하면서 감소하였다. .대추나무가지의 평균 비틀림 강성은 5.2$\times$$10^{7}$ N/m$^2$으로 나타났으며, 가지의 굵기가 증가하면서 음의 지수 함수적으로 감소하는 경향을 나타냈으나, 데이터가 일정한 범위에 산재해 있어 가지의 굵기에 따른 강성계수변화 특성은 일정한 경향으로는 나타나지 않았다. .대추 잎줄기의 평균 무게, 잎수, 길이가 각각 0.7g, 6.6개, 12.2 cm로 나타났다. .대추 잎의 평균 잎면적, 무게, 탈리력은 각각 13 $cm^2$, 0.2g, 4.4 N으로 나타났다. .종말속도는 대추 열매의 무게가 증가하면서 증가하고, 대추잎의 무게, 면적이 증가할수록 감소하는 경향을 나타냈으며, 잎줄기의 종말속도는 잎줄기 무게 혹은 잎줄기에 매달린 잎의 수와는 거의 영향을 받지 않는 것으로 나타났으며, 잎줄기의 길이가 증가할수록 약간씩 증가하는 경향을 나타냈다.