• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.149-157
• /
• 2016

In this paper, we propose a new clutter reduction algorithm, which rejects heavy clutter density in shallow water environments, based on a clustering method. At first, it applies the density-based clustering to active sonar measurements by considering speed of targets, pulse repetition intervals, etc. We assume clustered measurements as target candidates and remove noise, which is a set of unclustered measurements. After clustering, we classify target and clutter measurements by the validation check method. We evaluate the performance of the proposed algorithm on synthetic data and sea-trial data. The results demonstrate that the proposed algorithm provides significantly better performances to reduce clutter than the conventional algorithm.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2149-2151
• /
• 2003

본 논문에서는 마이컴(PIC16C74)과 Tabu 탐색법 및 지능기법(퍼지 및 신경회로망)을 이용하여 고정밀 제어 및 강인한 제어 성능을 가지는 초소형 DC 모터용 지능형 제어기를 개발하였다. 이를 위해 마이컴(PIC16C74)를 이용한 지능형 제어 알고리즘을 개발하고, 초소형 DC 모터용 드라이브 회로 설계 및 제작하였다. 개발한 초소형 DC 모터 지능형 제어기는 디지털 자동 용접캐리지에 적용할 예정이며, 다른 응용 분야로써는 자동배수장치, 반도체 분야, 산업용 로봇 분야 및 조립자동화 시스템 분야 등에 사용되는 구동모터에 적용함으로서 정밀도와 외부의 잡음에 대한 영향을 경감시켜 안정성과 효율향상 및 에너지절약이 가능할 것이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.797-798
• /
• 2009

군집화는 대용량의 데이터로부터 유용한 정보를 추출하는 데에 적합한 데이터마이닝 기법들 중 하나이다. 군집화 기법은 주어진 데이터그룹 내에서 사전정보 없이 의미있는 지식을 발견할 수 있으므로 큰 어려움이 없이 실제 응용분야에 적용할 수 있다. 또한, 대용량 데이터를 다룰 때에 개별적인 데이터에 대한 접근 횟수를 줄이고, 알고리즘이 다루어야 할 데이터 구조의 크기를 줄일 수 있다. 본 논문에서는 밀도-기반 군집화 기법을 기반으로 하는 새로운 군집화 기법을 제안한다. 우리가 제안하는 군집화 기법은 반복적인 군집화 과정을 통하여 군집 내 주변 잡음을 제거하고 더 세밀하게 집단을 세분화하는 것이 가능하다. 또한, 군집을 표현하는 데에 계층구조로 나타내어 각 군집의 상관관계를 파악하는 데에 유리하다. 본 논문에서 제안하는 군집화 기법을 통하여 다양한 밀도를 가진 군집들을 효과적으로 분류할 수 있을 거라고 기대된다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.22-26
• /
• 2012

This paper introduces a 2.5-Gb/s optical receiver implemented in a standard 1P4M 0.18um CMOS technology for the applications of active optical HDMI cables. The optical receiver consists of a differential transimpedance amplifier(TIA), a five-stage differential limiting amplifier(LA), and an output buffer. The TIA exploits the inverter input configuration with a resistive feedback for low noise and power consumption. It is cascaded by an additional differential amplifier and a DC-balanced buffer to facilitate the following LA design. The LA consists of five gain cells, an output buffer, and an offset cancellation circuit. The proposed optical receiver demonstrates $91dB{\Omega}$ transimpedance gain, 1.55 GHz bandwidth even with the large photodiode capacitance of 320 fF, 16 pA/sqrt(Hz) average noise current spectral density within the bandwidth (corresponding to the optical sensitivity of -21.6 dBm for $10^{-12}$ BER), and 40 mW power dissipation from a single 1.8-V supply. Test chips occupy the area of $1.35{\times}2.46mm^2$ including pads. The optically measured eye-diagrams confirms wide and clear eye-openings for 2.5-Gb/s operations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.139-147
• /
• 2015

Steady state visual evoked potential (SSVEP) has been actively studied because of its short training time, relatively higher signal-to-noise ratio, and higher information transfer rate. There are two popular analysis methods for SSVEP signals: power spectral density analysis (PSDA) and canonical correlation analysis (CCA). However, the PSDA is known to be vulnerable to noise due to the use of a single channel. Although conventional CCA is more accurate than PSDA, it may not be appropriate for the real-time SSVEP-based BCI system when it has short time window length because it uses sinusoidal signals as references. Therefore, the two methods are not efficient for the real-time BCI system that requires a short TW and a high recognition accuracy. To overcome this limitation of the conventional methods, this paper proposes a frequency recognition method with a combination of CCA and PSDA using the difference between powers of canonical variables obtained from the results of CCA. Experimental results show that the performance of the combination of CCA and PSDA is better than that of CCA for the case of a short TW.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.95-102
• /
• 2006

In this paper, we model a traffic of multiple tags operated in 2.45GHz band RTLS environment and analyze the multi-tag interference. Also, we propose a high precision location estimation algorithm of RTLS and then analyze its performance. From the results, the BER performance of RTLS degrades as the number of multi-tags increase in Gaussian noise and fading(m=15) environment. To meet the BER specification of RTLS, $10^{-5}$, we have to limit the multi-tag number to below 40. We also estimate the tag's location in $250m{\times}250m$ searching-area with enhanced TDOA scheme. It is confirmed that the 3m radius within accuracy of RTLS specification is satisfied, if the number of sub-blink receives more than 2 when available reader is 3 to 8.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.8
• /
• pp.1-6
• /
• 2011

In this paper, another analytical approach for dual-hop amplify-and-forward(AF) relay systems is proposed over Rayleigh fading channels. Previous approaches derived the moment generating function(MGF) by using the cumulative distribution function(CDF) or probability density function(PDF) of the received signal-to-noise ratio(SNR) for source-relay-destination(S-R-D) link. Then, the average symbol error rate is expressed based on derived MGFs. In this paper, another new approach is proposed. It means that the MGF is directly derived by utilizing PDFs of both source-relay(S-R) and relay-destination(R-D) links. Additionary, the newly derived MGF is compared and analyzed with previous ones. Furthermore, simulation results are presented to validate the accuracy of proposed analytical expression. Based on this, it is confirmed that the proposed analytical approach can be a another solution for dual-hop AF relay systems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.9-17
• /
• 2011

As semiconductor process rapidly developed, the density of chips becomes higher and the space between adjacent lines narrows smaller. This trend increases the capacitance and inductance in interconnects and the coupling-capacitance of adjacent lines grows even bigger than the self-capacitance of themselves, especially in global interconnects. Inductive and capacitive coupling observed in these phenomena may cause serious problems in signal integrity. This paper proposes a codeword generation technique using extra interconnect lines to reduce the crosstalk caused by inductive and capacitive coupling and to reduce dynamic power consumption considering probability of input data. To estimate the performance of the proposed technique, the experimental results have been obtained using FastCap, FastHenry and HSPICE, and it has been shown that the power consumption using the proposed technique has yielded approximately 15% less than the results of the previous technique.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.188-193
• /
• 2011

In this letter, we have derived another exact performance analysis for the OADF(opportunistic adaptive decode-and-forward) relay systems over Rayleigh fading channels. Based on error-events at relay nodes, the received instantaneous SNR(signal-to-noise ratio) is presented and its PDF(probability density function) is expressed as a more tractable form in which the number of summations and the length of each summation are specified. Then, exact average error rate, outage probability, and average channel capacity are obtained as general forms. Simulation results are finally presented to validate that the proposed analytical expressions can be a unified frame work covering all Rayleigh fading channel conditions. Furthermore, it is confirmed that OADF schemes can outperform the other schemes on the average error rate, outage probability, and average channel capacity.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1692-1700
• /
• 2009

This paper proposes the direction distribution of surface normal vectors as a feature descriptor of three-dimensional models. Proposed the feature descriptor handles rotation invariance using a principal component analysis(PCA) method, and performs mesh simplification to make it robust and nonsensitive against noise addition. Our method picks samples for the distribution of normal vectors to be proportional to the area of each polygon, applies weight to the normal vectors, and applies interpolation to enhance discrimination so that the information on the surface with less area may be less reflected on composing a feature descriptor. This research measures similarity between models with a L1-norm in the probability density histogram where the distances of feature descriptors are normalized. Experimental results have shown that the proposed method has improved the retrieval performance described in an average normalized modified retrieval rank(ANMRR) by about 17.2% and the retrieval performance described in a quantitative discrimination scale by 9.6%~17.5% as compared to the existing method.