• Communications of the Korean Mathematical Society
• /
• v.16 no.4
• /
• pp.543-566
• /
• 2001

이차원 선형 탄성방정식을 소개하고 약한 형식 타원성을 보여준다(P-1)순응 유한요소를 사용할 때 나타나는 잠김현상을 설명하고 그 해결책으로서 비순응 유한요소법과 penalty 항을 가진 혼합문제, 일계 최소자승법 등을 소개한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.711-711
• /
• 2012

이 연구에서는 수심적분된 이차원 비정상 수치모형인 KU-RLMS 모형의 잠김/드러남 기법을 개선하고, 기존의 WAD 기법과 새로 도입한 기법의 정확도 평가를 수행하였다. 기존의 WAD 기법은 수학적으로는 다소 불완전하지만 수치적으로는 손쉬운 방법으로써, 각 시간 단계에서 잠긴 격자 또는 드러난 격자를 시험하고, 각 격자의 경계에서 플럭스에 대한 개폐 조건을 적용하는 방법을 사용하였다. 개선된 기법은 WAD 경계에서의 질량보존을 고려하는 방법이다. 두 가지 잠김/드러남 처리 과정의 정확도 비교는 포물형 수조에 대한 해석해와 수치모형의 결과를 비교하는 방법을 사용하였다. 기존에 WAD 기법은 수치해와 해석해의 위상차가 발생하는 것을 확인할 수 있으며, 진폭은 조금씩 감소하는 현상이 나타났지만, 개선된 기법을 사용할 경우 위상차와 진폭감소 현상이 현저히 개선됨을 확인할 수 있었다.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.143-149
• /
• 2008

Purpose: The purpose of this study is to compare the results of using a locking compression plate and an unlocked plate for treating proximal humeral fractures. Materials and Methods: This study was based on 20 patients who underwent plate fixation for proximal humeral fractures out of the 87 patients with proximal humeral fractures and who were admitted from 2003 to 2007 in our hospital. Of the 20 patients, 10 were treated with a locking compression plate and the other 10 were treated with an unlocked plate. Each group was evaluated according to the humeral neck shaft angle, the period until bony union, the complications and the Constant score. The humeral neck shaft angle was based on plain x-rays taken immediately after the operation and at 6 months postoperatively. The Constant score was evaluated on the last visit to our clinic. Results: There was no significant statistical difference between the two groups in terms of the neck shaft angle, the period until bony union and the Constant score. Yet, there were three cases of screw migration in the unlocked plate group. Conclusion: There was no significant difference between the two groups in terms of the neck shaft angle, the period until bony union and the Constant score. The locking compression plate is considered to achieve more effective fixation for proximal humerus fractures because there were less complications such as screw migration.

• Composites Research
• /
• v.17 no.1
• /
• pp.38-46
• /
• 2004

This paper aims to correlate the micro-mechanical behaviour of tow geometry with applied in-plane forces during deformation of dry woven carbon-fibre fabric. These in-plane forces lead to differences in tow reorganisation during deformation and so changes in the way in which 'lock-up' occurs. In this paper, deformation of micro-mechanical parameters such as tow interval, crimp angle, change in tow amplitude and wavelength are investigated. To observe the micro-deformation of the fabric structure, appropriate specimens from bias extension and biaxial tests are sectioned and observed under the microscope. It was found that different loading conditions cause geometric deferences in the tow architecture. The variation in deformed tow geometry with shear angle is fitted using a simple parametric model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.25-34
• /
• 2003

In the present paper, formulation of a nine-node assumed strain shell element is modified and extended for analysis of actuator embedded/attached structures. The shell element can alleviate locking and has sic DOFs per node by discarding assumption of no thickness change. In modeling of the physicalquantities, we have assumed linear strain field through the whole thickness direction. The electric and mechanical quantities have been coupled through the constitutive equations. Unlike typical shell element, the present shell element allows thickness change. Thus, three-dimensional piezoelasticity can be accurately simulated. Base on the formulation, a finite element program is generated and the code is validated by solving numerical examples. The results from the present work are well agreed with those from other references.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.448-457
• /
• 2011

A wetting and drying(WAD) scheme was introduced in KU-RLMS which is a two-dimensional depth-averaged unsteady model, and applicability tests for wetting and drying were performed in this study. WAD scheme in the model uses a mathematically less elegant but numerically easier method to test for dry or wet cells at each time step, then to apply blocking conditions for fluxes at cells' interfaces. WAD scheme introduced in the model was verified against an analytical solution in a frictionless parabolic basin. It was found that there occurs a little phase difference between analytical and numerical solution and little decrease of amplitude of numerical result. I used three test channels having a linear sloping bottom topography, a stepwise bottom topography, and a stepwise, a bumpy and bowl-shaped bottom topography. It could be found that numerical simulation results in test channels have similar shapes of Balzano[4] and Oey[15].

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1889-1893
• /
• 2008

본 연구에서는 완경사 계단형 낙차공에서 하류수심 변화에 따른 도수 형태의 변화와 WTF 흐름 특성에 대한 분석을 수행하였다. 일정한 유량에서 하류수위를 증가시키면 도수 형태가 달라지는데 특히 계단 끝단에서 완전도수, 잠김도수(B점프), downward curved jet, upward curved jet, wave type flow(WTF)가 차례로 나타났다. 잠김도수에서는 표면 롤러 현상이 관찰되었고 curved jet에서는 큰 유속 감세 없이 파가 하류까지 전달되었다. WTF에서는 사류흐름이 바닥 recirculation 구역의 영향으로 변형되면서 wave 형태의 도수를 발생시켰다. 하류수위를 점점 증가 시키면 도수의 발생 위치가 계단 위쪽으로 이동하며 잠김도수와 WTF가 번갈아가며 발생하였다. 하류수위가 높아질수록 도수의 규모는 작아졌으며 표면 롤러도 미약해지는 경향을 보였다. 세 가지 유량조건에 따른 WTF의 규모를 비교한 결과 유량이 증가할수록 WTF의 크기가 증가하였으며 무차원화한 WTF의 형상은 거의 비슷한 것으로 나타났다. 계단형 낙차공은 기존낙차공에서 발생하는 도수와 달리 WTF가 발생되므로 이에 대한 분석이 필요하다. WTF가 발생하는 구간의 수위는 하류수위보다 높아지기 때문에 하천 설계 시 하천 접합부의 조건(구수부지설치, 제방설치 등)에 따라 wave의 높이가 설계의 중요 인자로 고려되어야 할 것이다. WTF는 지금까지의 계단형 낙차공 설계 시 고려되지 못한 부분으로서 차후에 계단형 구조물 또는 계단식 변형 구조물 설계 시 주요 자료로 활용 될 것이다.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.5
• /
• pp.20-26
• /
• 2007

Some gate valves are susceptible to pressure locking and thermal binding which prevent the safety function. The safety related gate valves susceptible to pressure locking and thermal binding shall be identified and taken preventive actions to ensure the safety function. The identification of the gate valves susceptible to pressure locking and thermal binding needs the evaluation of system design, valve and piping arrangement, test requirements, and operating conditions. Application of preventive methods should consider the system safety function, applicability, effectiveness, interface with system design, and cost. The selection procedure of valves susceptible to pressure locking and thermal binding can be effectively used in industry including nuclear power plants. In order to prevent the pressure locking, the hole can be drilled through the one disc of upstream side or down stream and the external equalizing line can be installed from bonnet to downstream or upstream. The double disc parallel seat valve type can be used instead of flexible wedge gate valve to prevent the thermal binding. The identification of gate valves susceptible to pressure locking and thermal binding, and preventive actions will meet the regulatory requirements and enhance the availability and safety of plants.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.630-635
• /
• 2001

The stem thrust required to unwedging a gate valve is influenced by the pressure and temperature when the valve is closed and by the changes in these conditions between closure and opening. "Pressure Locking" and "Thennal Binding" refer to situations where pressure and temperature effects cause the unwedging load to be much higher than normal. A model of these phenomena has been developed. The effects of pressure and temperature are analyzed to determine the change in this disk-to-seat "interference". Flexibilities or Stiffness of the disk and body strongly influence the unwedging thrust. Calculation and limited comparison to data have been performed for the RHR motor operated valve designs and scenario. Pressure changes can increase the unwedging thrust when bonnet pressure exceeds the pressure in the adjacent piping and temperature changes can increase the unwedging thrust when a temperature change after closure produces an increase in the disk-to-seat interference.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.235-236
• /
• 2009

파장이 길고 에너지가 낮은 근적외선 영역 광자 두 개를 동시에 여기했다가 형광으로 방출하는 비선형 현상을 이용한 이광자 현미경은 살아있는 세포를 넘어 생체조직 깊은 곳에서 일어나는 생물학적 변화 관찰 및 3차원 이미지 해석이 가능한 매우 효과적인 장비이다. 그러나 상용화된 이광자 현미경은 매우 고가이고 응용의 다양성을 위한 구조적 변형이 매우 힘들다. 본 논문에서는 모드잠김 이터븀 광섬유 레이저를 이용하여 비용 효율이 높고 다루기 쉬운 이광자 현미경을 구현 하고자 한다.