• Title/Summary/Keyword: 잔차스펙트럼

Search Result 16, Processing Time 0.023 seconds

Vibration Identification of Gasoline Direct Injection Engine Based on Partial Coherence Function (부분기여도 함수를 이용한 직접분사 가솔린 엔진 부품의 진동원 분석)

  • Chang, Ji-Uk;Lee, Sang-Kwon;Park, Jong-Ho;Kim, Byung-Hyun
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.36 no.11
    • /
    • pp.1371-1379
    • /
    • 2012
  • This paper presents a method for estimating the contribution of vibration sources in gasoline direct injection engine parts with a multiple-input system. A partial coherence function was used to identify the cause of the linear dependence indicated by an ordinary coherence function. To apply the partial coherence function to vibration source identification in the powertrain system of a gasoline direct injection engine, a virtual model of a two-input and single-output system is simulated. For the validation of this model, the vibration of the powertrain parts was measured by using triaxial accelerometers attached to the selected vibration sources-a high-pressure pump, fuel rail, injector, and pressure sensor. After calculating the partial coherence between each source based on the virtual model, the vibration contribution of the powertrain system is calculated. This virtual model based on the partial coherence function is implemented to determine the quantitative vibration contribution of each powertrain part.

Noise-source Analysis of Tactical Vehicle Using Partial Coherence Function (부분기여도함수를 이용한 전술차량 소음원 분석)

  • Park, Sungho;Lee, Kyunghyun;Han, HyungSuk;Jeon, Soohong
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.26 no.7
    • /
    • pp.774-780
    • /
    • 2016
  • In this paper noise source and transfer path of tactical vehicle are analyzed with partial coherence function and spectrum analysis. Engine, transmission, structure panel and aerodynamic are main source of cabin noise. To reduce cabin noise, identifying transfer path of sources and analyzing their contribution is important. With modeling of transfer path and partial coherence function, transfer path and principal noise source can be identified. Engine/transmission and structural resonance are principal source of low frequency noise and by adding stiffener and sound absorbing material, resonance of vibration and inflow air problem can be solved.

Research on audio bandwidth extension using residual signal replication (잔차 신호 복제 기반 오디오 대역 확장 방법)

  • Lim, Wootaek;Beack, Seungkwon;Lee, Taejin
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2021.06a
    • /
    • pp.57-60
    • /
    • 2021
  • 오디오 대역 확장 기술은 저 해상도의 오디오 신호를 고 해상도의 오디오 신호로 복원 또는 생성해 내는 기술이다. 이와 관련하여 오디오 코덱에서는 고 대역 오디오 신호의 저 비트 부호화를 위해 사람이 청각이 둔감하게 인지하는 고 대역의 오디오 신호에 대해 실제 신호에 대한 양자화를 수행하지 않고, 코딩 되어 전송된 저 대역 신호와 고 대역의 파라미터를 이용하여 신호를 합성하는 스펙트럼 대역 복제 기술이 널리 사용된다. 본 연구에서는 선형 예측 기반의 주파수 대역 복제 방법을 통해 추가 정보를 활용한 오디오 대역 확장을 수행하고 신경망 기반의 오디오 신호 개선을 통해 복제된 신호의 개선 가능성을 검토하였다. 실험 평가는 MPEG 에서 코덱 평가용으로 사용되는 테스트 시퀀스를 사용하였으며, 실험 결과 제안하는 방법을 적용하여 기존 오디오 대역 확장 기술 대비 성능이 향상됨을 확인하였다.

  • PDF

Remote Sensing을 이용한 태화강 하구 수심정보 획득 - Landsat 7 ETM 다중분광영상을 사용

  • Oh, Chang-Seok;Cho, Hong-Je;Song, Yeong-Min
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1530-1534
    • /
    • 2006
  • 원격탐사 기법을 이용한 수심측정은 하나 혹은 그 이상의 파장대에서 수심과 반사되는 에너지 사이의 관계를 찾아내는데 달려 있다. 수심 정보를 획득하기 위한 스펙트럼의 최적 파장길이는 다중분광영상(Landsat 7 ETM)의 blue band에 해당하는 약 $0.48{\mu}m$이며, 이 band를 이용하여 연안의 수심을 측량하기도 한다. 하지만 단일밴드에 의해서 측정된 값을 이용한 수심측정은 해저표면에 의한 반사에 심각한 영향을 받을 수 있기 때문에 신뢰할 만한 결과를 얻을 수 없다. 따라서 본 연구에서는 해수와 관련한 여러 가지 변수들을 결정하기 위하여 다량의 실측 데이터를 필요로 하지 않는 선형다중밴드방식을 이용하여 2개의 Landsat 영상으로 태화강 하구의 수심정보를 추출하고 태화강 본류에 대한 수심정보획득과 하상변동에 대한 분석 가능성을 파악하였다. 그 결과 임의로 선정한 표본 50개 지점에 대한 영상분석에 의한 수심값과 해도의 수심값의 잔차 평균이 각각 2.29m, 2.43m로 비교적 큰 잔차를 보였다. 하지만 20m 미만의 수심대의 표본만을 확인한 결과 각각 1.73m, 1.88m로 잔차 평균이 크게 감소하였다. 2000년, 2003년 영상을 비교한 결과, 1번 2번 3번 지역에서 평균적으로 약 1.838m정도 2003년 수심이 감소한 것으로 나타났다. 본 연구에서 20m 미만의 수심 측량은 낮은 해상도의 위성영상이라도 실제 수심과 근접하고 있는 것으로 판단 할 수 있었다. 이것으로 넓은 지역을 경제적으로 수심자료를 획득할 수 있는 위성영상분석을 이용한 수심측정은 활용성이 있는 것으로 나타났다. 하지만 해저표면의 형태와 해수면의 상태 등 수심측정에 미치는 영향에 관한 실측데이터에 대한 자료수집과 분석이 선행된다면 더욱 좋은 결과를 도출할 수 있을 것으로 판단된다.A}$는 최대암모니아 섭취률을 이용하여 구한 결과 $0.65d^{-1}$로 나타났다.EX>$60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수

  • PDF

한일공동VLBI상관기의 지연 보상 및 프린지 멈춤 알고리즘

  • No, Deok-Gyu;O, Se-Jin;Yeom, Jae-Hwan;Park, Seon-Yeop;Gang, Yong-U
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.35 no.1
    • /
    • pp.45.1-45.1
    • /
    • 2010
  • 한국천문연구원과 일본 국립천문대는 공동으로 한일공동VLBI상관기(Korea-Japan VLBI Correlator, KJJVC)를 개발하였다. 이 상관기는 최대 16 관측국에 대하여 16 세트의 자기상관 및 120 세트의 상호상관을 계산할 수 있다. 각 관측국당 최대 8,192 Mbits/sec의 입력 데이터를 처리할 수 있으며, 8,192개의 주파수채널을 갖는 상관 스펙트럼을 약 25.4 밀리초~수초의 적분 시간으로 출력할 수 있는데, 최대 상관 출력 속도는 1.4GB/sec이다. 한편, 이 상관기는 한국우주전파관측망(KVN) 뿐만 아니라 동아시아VLBI관측망 및 우주공간VLBI관측망의 관측 데이터도 처리할 수 있도록 설계 제작되었으며, 최대 지연 추적 범위는 ${\pm}35,000km$이며, 보상 가능한 최대 기선 속도는 7.5km/sec이다. 현재 다른 VLBI관측망에서 사용하고 있는 타 상관기의 경우 지연은 2차 미분까지 보상하고, 프린지 위상은 3 단계로 보상하고 있는 것에 비하여, 한일공동VLBI상관기에서는 지연은 3차 미분까지 보상하여 지연 잔차를 최소화하고 프린지 위상은 16 단계로 세분하여 보상 수준의 정밀도를 최대화하였다. 이러한 지연 보상 및 프린지 멈춤 알고리즘을 상세히 소개하고 그 특성 및 장점을 보고한다.

  • PDF

Quantitative Analysis of Carbohydrate, Protein, and Oil Contents of Korean Foods Using Near-Infrared Reflectance Spectroscopy (근적외 분광분석법을 이용한 국내 유통 식품 함유 탄수화물, 단백질 및 지방의 정량 분석)

  • Song, Lee-Seul;Kim, Young-Hak;Kim, Gi-Ppeum;Ahn, Kyung-Geun;Hwang, Young-Sun;Kang, In-Kyu;Yoon, Sung-Won;Lee, Junsoo;Shin, Ki-Yong;Lee, Woo-Young;Cho, Young Sook;Choung, Myoung-Gun
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.3
    • /
    • pp.425-430
    • /
    • 2014
  • Foods contain various nutrients such as carbohydrates, protein, oil, vitamins, and minerals. Among them, carbohydrates, protein, and oil are the main constituents of foods. Usually, these constituents are analyzed by the Kjeldahl and Soxhlet method and so on. However, these analytical methods are complex, costly, and time-consuming. Thus, this study aimed to rapidly and effectively analyze carbohydrate, protein, and oil contents with near-infrared reflectance spectroscopy (NIRS). A total of 517 food samples were measured within the wavelength range of 400 to 2,500 nm. Exactly 412 food calibration samples and 162 validation samples were used for NIRS equation development and validation, respectively. In the NIRS equation of carbohydrates, the most accurate equation was obtained under 1, 4, 5, 1 (1st derivative, 4 nm gap, 5 points smoothing, and 1 point second smoothing) math treatment conditions using the weighted MSC (multiplicative scatter correction) scatter correction method with MPLS (modified partial least square) regression. In the case of protein and oil, the best equation were obtained under 2, 5, 5, 3 and 1, 1, 1, 1 conditions, respectively, using standard MSC and standard normal variate only scatter correction methods with MPLS regression. Calibrations of these NIRS equations showed a very high coefficient of determination in calibration ($R^2$: carbohydrates, 0.971; protein, 0.974; oil, 0.937) and low standard error of calibration (carbohydrates, 4.066; protein, 1.080; oil, 1.890). Optimal equation conditions were applied to a validation set of 162 samples. Validation results of these NIRS equations showed a very high coefficient of determination in prediction ($r^2$: carbohydrates, 0.987; protein, 0.970; oil, 0.947) and low standard error of prediction (carbohydrates, 2.515; protein, 1.144; oil, 1.370). Therefore, these NIRS equations can be applicable for determination of carbohydrates, proteins, and oil contents in various foods.