• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.1-9
• /
• 2005

The interaction between hypersonic free stream and side jet flow at high altitudes is investigated by using the direct simulation Monte Carlo (DSMC) method. In order to alleviate the difficulty associated with the large density difference between the free stream and the side jet flow and to simulate the two flows simultaneously, a weighting factor technique is applied. For validation, the corner flow over a pair of plates perpendicularly attached is calculated with and without a side jet, and the results are compared with experiment. For a more realistic configuration, the flow past a blunted cone cylinder shape is solved. The leeward or windward jet is injected into the free stream and the effect on the aerodynamic force and moment is observed at various flow angles. The lambda shock effect and the wake structure are studied in terms of the surface pressure differential. A higher interaction between the free stream and the side jet flow is observed when the side jet is injected in the windward direction.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.501-511
• /
• 2019

Messages to help people far away, such as International relief campaign, are heavily influenced by situational factors. In this light, the study examined whether the message characteristics (gain/loss framing) and the individual characteristics (previous attitude to helping activity) interact to affect the message attitude and behavioral intention. The study was conducted by an experiment involving 220 subjects. The analysis resulted in the significant interactions between gain/loss framing and pre-attitude by the same direction for message attitudes and behavioral intention. It was shown that gain framing worked more effectively for the relatively more friendly group towards helping activities than for the less friendly one. The same direction was shown in the loss framing, but its difference was smaller. The process of the interactions appeared as mediated by anticipated satisfaction. The practical and theoretical implications were discussed for proper planning of messages to help others.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.189-200
• /
• 2017

Nonplanar structural walls with C-shaped and H-shaped sections have been used as an efficient lateral force-resisting system for building structures. Since the nonplanar walls are subjected to axial load and bending moments about two orthogonal axes, complicated section analysis is required for flexure-compression design. In the present study, a straightforward design method for biaxially loaded C- and H-shaped walls was proposed by modifying the existing load contour method for columns with symmetric solid sections. For this, a strain compatibility section analysis program that can calculate biaxial moment strengths of arbitrary wall section was developed and its validity was verified by comparing with existing test results. Then, through parametric study, the interaction of biaxial moments at constant axial loads in prototype C- and H-shaped walls was investigated. The results showed that, due to unsymmetrical geometry of the wall sections, the biaxial interaction was significantly affected by the moment directions and axial loads. From those investigations, non-dimensional contour equations of the biaxial moments at constant axial loads for C- and H-shaped walls were suggested. Further, design examples using the proposed contour equations were given for engineering practice.

• Economic and Environmental Geology
• /
• v.25 no.1
• /
• pp.61-72
• /
• 1992

The Danyang area consists of the thrust and folded sedimentary rocks of Paleozoic and Mesozoic Era. The area is bounded by major tectonic units which are the Gagdong Thrust to the west and the Okdong Fault to the east. According to the structural analyses, the area is affected by polyphase deformation. This study establishes deformational sequence in the area. Mylonite zone along the Okdong Fault corresponds to the first generation of structures ($D_1$). $D_1$-structures are discrete shear zone in the Jangsan Formation and bedding parallel extensional deformation in the Cambro-Ordovician sequences. $D_2$-structures were formed prior to the sedimentation of the Jurassic Bansong Group, which are the NW-trending fold and linear structures. After sedimentation of the Bansong Group, the area is strongly affected by the Daebo Orogeny which produces NE-trending thrusts, folds and linear structures. Earlier structures were tightened and rotated toward NE. Some thrust faults did not propagate into the Bansong Group. It is suggested either the Bansong Group acted as a decoupling horizon or rest on unconformably on the thrust faults. The area is weakly affected by $D_4$-event of which structures are E-W trending folds and faults. The Jugryeong Fault clearly cut the earlier folds and thrust faults. The rocks within the fault zone were sliced and rotated during the strike-slip movements. Block rotation and transpressional features can be commonly observed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.153-160
• /
• 2015

The objective of this study is to construct the TPU aerodynamic database with wind tunnel test data of overall wind loads and responses on tall buildings. In this study, wind tunnel tests were conducted to investigate characteristics of wind forces and the effect of wind load combination by cross-correlation analysis among along-wind overturning moment, across-wind overturning moment and torsional moment on a tall building with various side ratios(D/B=0.33, 0.50, 0.77, 0.83, 0.91, 1.0, 1.1, 1.2, 1.3, 2.0 and 3.0) for different terrain roughnesses. The results of wind tunnel tests were compared with those of past literatures. As a result, there was no significant effects of changing of terrain roughnesses on moment coefficients and power spectral densities of across-wind overturning moment coefficients and torsional moment coefficients with various side ratios. Further, these results were good agreement with those of past literatures. From cross-correlation analysis, the across-wind overturning moment coefficients were highly correlated with the torsional moment coefficients. The results of this study will be helpful for practical designers in preliminary design stage.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.317-318
• /
• 2016

본 논문에서는 증강현실이나 혼합현실을 구현하기 위한 가장 현실적인 대안으로 주목받고 있는 프로젝션 매핑 기법을 활용하여 상호작용이 가능한 콘텐츠를 제작하기 위한 방법론을 제시하고 구체적인 구현의 방향성을 제시한다. 프로젝션 매핑은 구현의 측면에서 기술 문턱이 높지 않고 하드웨어의 수급이 용이하다는 점과 콘텐츠의 만족도가 매우 높다는 장점을 가지고 있어서 홀로그램과 같은 궁극의 증강현실 기술이 완성되기 이전까지 매우 현실적인 대안 기술로 인식되어 지고 있다. 본 논문에서는 이러한 프로젝션 매핑 기반의 증강현실 프레임워크를 완성하고 기본적인 상호작용이 가능한 콘텐츠를 제작하여 프로젝션 매핑 기반의 콘텐츠의 우수성과 가능성을 실증해 보이고자 한다. 향후 본 논문에서 실증한 상호작용 프로젝션 매핑 분야의 기술들은 전산업계에서 매우 파격적인 변화를 이끌어 낼 것이라고 판단된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.310-312
• /
• 2004

이 논문에서는, 단백질의 상호작용을 다양한 아미노산의 속성과 Support Vector Machine(SVM)을 사용하여 예측하였다. SVM을 사용한 단백질 상호작용의 예측 시스템에 단백질 상호작용에 중요한 작용을 하는 아미노산의 속성을 사용하고 있다. 이번 실험은 9가지의 아미노산의 속성의 조합 즉, 511(2$^{9}$ -1)가지의 아미노산 속성을 SVM 학습데이터로 사용하여 예측시스템의 결과를 비교한다. 실험에는 Database of Interacting Proteins(DIP)를 사용하였다. 실험을 위하여 DIP의 H.pylori를 학습용데이터로 사용하고, E.coli를 예측데이터(검증데이터)로 사용하였다. 실험에 따르면 H.pylori의 학습데이터와 E.coli를 예측데이터의 가공에 '소수성'을 사용한 방법보다 '방향성'을 사용한 방법이 더 높은 수치를 나타냈다.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.7-19
• /
• 1985

The genetic variances and combinding ability of some useful characters were analyzd on sixty four combinations in the 8$\times$8 diallel cross using the four Japanese races(Jam 107, Jam 113, Jam 117 and Jam 119) and the four Chinese races(Jam 108, Jam 114, Jam 118 and Jam 120). The eight quantitative characters were the total larval stage period(TP), the fifth larval instar period(FP), the female cocoon total weight(FW), the male cocoon total weight(MW), the female cocoon layer weight(FL), the male cocoon layer weight(ML), the female cocoon layer ratio(FR), and the male cocoon layer ratio(MR). The results were as follows: The analysis of the genetic variance and the combining ability in the TP and the FP. In TP and FP, h2N was less than h2B. The GCA, SCA and RCA were at a high significant level. Hl/D and (Hl/D)1/2 ere large. The heterosis were small minus. E and D were large. The r was in the positive direction, because the recessive genes were mainly expressed as a short rearing periods. The regressions of the characters were passed below 0 point, because the characters in the TP and the FP were appeared overdominant. The order of the dominance in the TP of the parents were in the order of Jam 119>Jam 113>Jam 117>Jam 108>Jam 120>Jam 114>Jam 107>Jam 118, and that in the FP of the parents were followed in the orders of Jam 117>Jam 113>Jam 108>Jam 114>Jam 119>Jam 107>Jam 120>Jam 118. The analysis of the genetic variance and the combining ability of the FW and the MW. In the FW and the Mw, h2N was less the h2B. The GCA and SCA were large but RCA was little. Hl/D and (Hl/D)1/2 in the parents were large. Heterosis was large. E was appeared large in the FW, and small in the MW. D was small. The r was of the minus direction, because the dominance genes were less expressed. The regression of the these characters were padded below 0 point, because the characters in FW and MW were appeared overdominant. The orders of the dominance in the FW of the parents were as the order of Jam 107>Jam 108>Jam 119>Jam 113>Jam 114>Jam 120>Jam 117>Jam 118, and in the MW of them in the order of Jam 114>Jam 120>Jam 108>Jam 113>Jam 107>Jam 119>Jam 117>Jam 118. The analysis of the genetic variance and the combining ability of the FL and ML. In the FL and the ML, h2N was less than h2B. GCA and SCA were large. RCA was little. Hl/D and (Hl/D)1/2 ere large. Heterosis was large. The r was in the negative direction, because the dominance genes were less expressed. The regression of the characters of FL and ML were appeared overdominant. The dominance in the FL of parents ere in the order of Jam 120>Jam 114>Jam 119>Jam 119>Jam 118>Jam 107>Jam 117>Jam 113, and the ML of them in the order of Jam 114>Jam 108>Jam 120>Jam 117>Jam 118>Jam 107>Jam 119>Jam 113. The analysis of the genetic variance and combining ability of the FR and the MR. In the FR and the Mr, h2N was less than h2B. GCA was large. The SCA and RCA were little. In the FW, Hl/D was large but (Hl/D)1/2 was a little. In MR, Hl/D and (Hl/D)1/2 both were a littel. Heterosis was a little. E in the FR was in the negative direction, because the dominance genes were less expressed but that in the MR was the positive direction because the recessive genes were mainly expressed. The order of the dominance in the FR of the parents were in the order of Jam 117>Jam 114>Jam 108>Jam 120>Jam 118>Jam 119>Jam 107>Jam 113 and that in the MR these were in the order of Jam 114>Jam 117>Jam 108>Jam 118>Jam 107>Jam 119>Jam 120.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.06a
• /
• pp.63-69
• /
• 1991

프로팅링저어널베어링은 저어널과 슬리브 사이에 자유롭게 움직일 수 있는 링을 삽입하여 이중의 유막이 형성되도록 한 것이다. 프로팅링저어널베어링은 이중의 유막을 가짐으로 인해 유량이 많이 필요하여 열적 특성이 좋고 마찰손실이 작으며 외축유막의 진동감쇠작용을 기대할 수 있으나, 링에 의해 내외축유막이 분리되어 있으므로 내축유막에 윤활제를 공급하는 것이 쉽지 않은 문제점이 있다. 동베어링에 대한 윤활제의 공급방법으로는 축을 통한 공급을 고려하지 않을 경우 다음과 같은 두가지를 생각할 수 있다. 첫째, 링에 내외축유막을 연결하는 급유구를 뚫어 외축유막으로 공급된 윤활제의 일부가 급유구를 통해 내축유막으로도 공급되도록 하는 방법 둘째, 축방향의 일단에서 내외축유막에 직접 가압급유하는 방법 이 가운데 둘째 방법은 축방향의 일단이 윤활제에 완전히 잠겨 있도록 밀봉하여야 하는 번거로움이 있으므로 잘 사용되지 않고 첫째 방법을 사용하는 것이 일반적이다. 첫째 방법에서도 링내외면에 원주방향급유홈을 파면 내외축유막으로의 윤활제공급이 보다 더 원활히 이루어 질 수 있을 것으로 기대되는데, 본논문에서는 이와 같이 원주방향급유홈이 있는 베어링을 원주방향급유홈 프로팅링저어널베어링이라 부르기도 하고, 이에 대하여 해석하고자 한다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.672-677
• /
• 1996

Volatile flavour components rates from aromatic rices were analyzed by Electronic nose systems. In functional group, polar compounds and aldehyde compounds showed much of volatile flavour components than apolar compounds, sulphur compounds and aminated compounds. The profiles of volatile flavour components rates were markedly differents of sen-sing times, amylose content.