• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.853-860
• /
• 2017

To evaluate the effects of mode II on the crack initiation and propagation stages, the effects in the fatigue threshold region under a mixed-mode I+II loading state was experimentally investigated. In the case of mixed-mode I + II, during the crack initiation stage, as the loading application angle (${\theta}$) increased, cracks occurred in the lower load owing to the effects of mode II, while the crack propagation rate decreased. The effects of mode II were experimentally investigated in the crack propagation stage by means of multilevel loading direction variation. Following mixed-mode I+II ($0^{\circ}{\rightarrow}{\theta}{\rightarrow}60^{\circ}$), as the load application angle increased, the fatigue crack propagation rate decreased, as did the fatigue crack propagation rate, which occurred later. Following mixed-mode I + II in case of(${\theta}{\geq}75^{\circ}$), the fatigue crack propagation rate was found to increase, while the fatigue life decreased.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.777-784
• /
• 2016

In this study, regulation of the performance test load of a vibration-proof fastening system used in urban railways was established through evaluation of the loads that it bears in the field. In order to investigate the range of the dynamic stiffness of the vibration-proof fastening system, dynamic stiffness tests were carried out for three types of vibration-proof fastening system that can be domestically supplied. Train and track interaction analyses in the frequency domain were carried out to evaluate the dynamic wheel loads. The track irregularity, which is a very important input factor in train and track interaction analysis, was considered as a PSD (Power Spectral Density) function, which was derived based on the measured data. The loads on the vibration-proof rail fastening system were evaluated considering various operating conditions in the urban railway. Regulation of the performance test load of the vibration-proof rail fastening system was established based on the evaluated loads.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.881-884
• /
• 2009

태양열을 이용한 발전은 신재생에너지 사업으로 현재 각광을 받고 있는 분야 중의 하나이다. 본 논문에서는 3kv급 태양열 집전기를 유한요소법을 이용하여 돌풍이 불 때 풍하중에 의한 안전성을 평가하였다. 태양열 집전기는 옥외에 설치가 되므로 바람에 대한 영향을 가장 많이 받게 되는데 풍하중은 특히 강한 태풍이 불 때에 가장 높은 설계변수로 자중이나 프레임이 태양을 트레킹 할 때 생기는 동역학적인 변수보다도 크게 된다. 기존에 풍압력에 대한 산술식이 있지만 구조에 따라 적용하는 방법이 다르므로 돌풍이 불 때의 풍속을 적용, 유한요소법을 이용하여 우선 플레이트 프레임 표면에 발생하는 표면 압력을 계산하였다. 구한 표면 압력으로부터 플레이트 부분에 작용하는 하중으로 환산을 구조물에 대입하였고, 구조물이 크고 Mesh수에 문제로 인해 프레임을 두 부문으로 나누어서 포스트 부문과 플레이트 부분에 적용하여 해석하였다. 포스트의 경우에는 플레이트에서 받은 풍하중을 벡터로 나누어서 적용하였고 플레이트 부분에서 작용하는 자중을 고려하여 적용하였다. 플레이트의 경우 돌풍에 안정적이라 하더라도 변형량이 높을 경우를 적용하였다. 포스트 부분과 플레이트 연결부에서도 보강을 통하여 적정범위의 응력이 집전기에 문제가 발생할 수 있으므로 적정한 범위의 변형량을 유지하기 위해 설계변경 하여 안전한 구조물이 되도록 하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.244-244
• /
• 2003

나노인덴테이션은 시편에 압자를 침투시켜 재료의 기계적 특성을 파악할 수 있는 경도시험법이다. 압입범위를 나노미터범위로 조절할 수 있어 기존에 접근할 수 없었던 극 미소부분에로 응용이 넓어지고 있다. 경도시험시 재료의 탄성 및 소성 작용에 의해 재료는 변형되고, 표면변화 관찰을 통해 표면아래 부분에서 이루어지고 있는 거동을 예측할 수 있다. 이러한 관점에서 나노인덴테이션 시험시에도 발생하는 파일업과 싱크인 현상에서 재료가 나노미터 범위에서 어떠한 양상으로 변형을 하는지를 고찰하는 것은 의미가 있을 것이다. 본 연구에서 파일업과 싱크인의 양상을 파악하고 그 양을 정량화하기 위하여 가공경화양에 따른 표면변화와 압입하중 변화에 따른 표면변화를 관찰하였다. 어닐링한 봉상 알루미늄을 압축변형을 0%, 5%, 20%, 40%, 50% 로 변형시켜 가공경화를 일으켰고, 표면은 전해연마하여 나노압입시험이 가능하도록 하였다. 각각의 시편을 나노인덴테이션 압입하중을 변화시켜 재료에서 하중 변화에 따라 나타나는 표면변화를 관찰하였고, 위의 각 조건에서 파일업양을 정량화 하였다. 연구결과에 대해 ANSYS 유한요소분석 프로그램을 사용하여 재료의 변형양상을 시뮬레이션 하였고, 실제 실험데이터와 비교 분석하였다.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.373-385
• /
• 2022

The drum cutter, which is used in the form of an attachment of a excavator, is very useful in that it can be used in connection with a excavator that can perform various tasks in the field. This study estimated the load and torque acting on the drum cutter attachment by measuring the hydraulic pressure and strain that appear during excavation on the exposed rock slope using the drum cutter installed in the excavator. Working conditions such as the operation angle between the boom and arm of the excavator were divided into eight working modes. And as a result of analyzing the variations in hydraulic pressure and action force according to the working mode, it was confirmed that the hydraulic pressure and flow rate can be driven without any problems within the range considered in the manufacturing specifications of the drum cutter. The average load and torque acting on the drum cutter were within the range of the manufacturing specifications, but the maximum load was up to four times the specification. Because sumping was not properly performed due to the high ground strength and the ground included discontinuous surfaces in some locations, no trend of load and torque was found depending on the angle between the boom and arm of the excavator. However, it is believed that this result can be used to determine the range of loads and torques that appear on the drum cutter when excavating a high-intensity rock.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3052-3060
• /
• 2013

When planning to construct adjacent structure by the side tunnel, the criteria of safety zone of tunnel have been proposed. There are no specific theoretical basis regarding load conditions and the distance of structure and the geological strata and the conditions of adjacent structure's location, and the conditions applied load. Two and three dimensional numerical analysis preformed to prove the deformation of the ground and structures caused by the tunnel excavation and evaluated the correlation and the suitability of the tunnel's safety zone regarding the location of adjacent structures and the changes in the modulus of deformation. This paper proposed the safety zone's range is getting bigger as the modulus of deformation is higher. Also, it seems that the possible range of construction under constraints in the diagram of revalued safety zone significantly expands as shear failure line appears on the invert extension line below the spring line.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.45-56
• /
• 2021

As the utilization of the underground space is activated, deep excavation of ground has been conducted for the installation of underground structures, the earth retaining wall has widely used to minimize deformation of the excavated ground. In particular, as deep excavation is actively progressing in an urban area where structures are concentrated, methods to minimize the deformation of wall have been devised to prevent damage to the structure adjacent to the wall, and one of these methods is the pre-loading method. This method is a method of suppressing the deformation of wall by actively applying a load on the strut to be installed in wall, and research on this method has been conducted recently. However, although related studies have been actively conducted, the management standard for the pre-loading of bracing has not been clearly presented until now. In addition, since the working force in the strut may increase depending on the depth of excavation or the soil condition of the backfill, the magnitude of the pre-loading that can be applied to the brace may decrease. Nevertheless, the magnitude of the pre-loading (more than 50% of the working load) proposed by the previous research results has been uniformly applied to the strut. In this study, 3D finite element analysis was performed to evaluate the application range of the pre-loading of H-beam strut according to the soil conditions of backfill. As a result of the analysis, it was found that there is a very high possibility that a problem may occur in the stability of the structure of strut due to the earth pressure and the pre-loading when the soil condition is weak and deep excavation proceeds. And it was found that the application range of the pre-loading was 5%~70% of the working load in strut.

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.5-6
• /
• 2006

본 시험의 목적은 수직주 및 $80^{\circ}$경사주에 대한 강도시험을 통하여 보통지선이 없는 수평지선주의 시설가능 범위를 파악하고, 전선장력에 대한 지선장력과 전주저항모멘트간의 상관관계를 실증시험을 통하여 지선 강도계산시 전주저항모멘트 적용의 타당성 여부를 조사하는 것이다. 시험결과 $2^{\circ}$이상 휘어진 전주는 지선 보강이 필요하며, 설계시 하중 작용점에 따른 전주저항모멘트는 일정한 값을 적용하여도 됨을 확인하였다. 그리고 지선강도계산식에서 전주의 저항모멘트를 고려하지 않는 것이, Y지선보다는 각 하중 작용점에 해당 불평균장력에 견디는 1조 지선을 시설하는 것이 바람직하다. 또한 보통지선이 없는 수평지선주는 지선에 작용하는 하중, 전주의 설계하중, 전주길이 및 지선의 설치위치를 고려하여 선정하여야 하여야 함을 도출하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.133-141
• /
• 1996

The mode of fatigue failure is depended on the characteristics of the fatigue crack initiated and propagated from the weld toe and the weld root in the load-carrying fillet welded joints. The characteristics of fatigue crack are deeply affected by the geometry of fillet and the stress range. The purpose of this study is to investigate critical weld size and stress range in order to occur toe failure under pulsating tension loading in the load-carrying fillet welded cruciform joints.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1994.05a
• /
• pp.111-114
• /
• 1994

상대적으로 사하중에 비해서 활하중 영향이 민감하게 작용하는 농업시설의 경우, 경제성 및 안정성에 근거한 구조설계를 위해서는 활하중의 결정요인의 정확한 분석을 통한 합리적인 설계하중의 산정이 필요하다. 단위적설 중량은 적설심에 따른 구분을 사용한다면 대부분 적설심 50cm 이하의 범위에 속하기 때문에 일률적으로 1.0kg/cm/$m^2$ 을 적용해야 하지만, 정확한 적설하중 산정을 위해서 기온에 따른 단위 적설중량의 변화를 분석할 필요가 있다. (중략)