• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.210-216
• /
• 2007

A study was conducted to find mechanism and spray characteristics of a mini-sprinkler with downward spray to develop a new design type to be able to prevent drop water. The experiments were executed in a plastic greenhouse to minimize the effect of the wind. Data was collected at five different operation pressures and at 4 different raiser heights. Spray characteristics of the sprinkler such as effective radius, effective area, mean application depth, absolute maximum application depth, effective maximum application depth and coefficient of variation were determined. In order to analyze the mechanism and packing supporter of sprinkler, the numerical simulation using ABAQUS was performed. The optimum pressure for preventing drop water was determined.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.69-80
• /
• 2002

차로변경이 발생하는 두 가지 상황 즉, 강제 차로 변경과 선택적 차로 변경 중, 선택적 차로변경 상황에서 운전자가 수락 가능한 간격을 발견했을 때, 차로별 속도 차가 차로 변경 의사결정에 미치는 영향을 모사할 수 있는 모형식을 추정하였다. 즉, 선택적 차로 변경은 운전자의 차로 변경 여부에 대한 상황판단과 함께 목적 차로의 간격 수락여부에 대한 의사결정으로 이루어지는데, 본 논문에서는 목적 차로에 수락 가능한 간격이 존재할 경우 차로별 속도차가 운전자의 의사결정에 어떤 영향을 미치는지에 대해 분석하였다. 이를 위해, 운전자 의 의사결정에 영향을 미칠 수 있는 다른 요소 즉, 중차량, 기하구조, 및 합·분류의 영향을 최소화하는 지점을 선택하여 표본조사를 실시하였으며, 보다 설명력 있는 모형식을 얻기 위해 상관분석 등을 수행하여 불필요하다고 생각되는 변수는 제외시켰다. 또한, 운전자의 희망속도와 주행 속도 차에 의한 영향을 반영하기 위해 현 차로 속도를 부가적인 변수로 추가하였으며, 계수추정은 통계패키지인 SAS를 이용하였는데, 자료분석에 있어, 속도차 구간에 따라 다른 간격수락 특성을 보여 차로별 속도차를 0∼2.0m/s구간과 2∼11.52m/s구간으로 나누어 분석을 수행하였다. 분석결과 속도차 0∼2.0m/s구간에서는 속도차가 증가할수록 차로 변경률이 높아졌으나, 2∼11.52m/s구간에서는 오히려 차로 변경률이 낮아지는 것으로 나타났는데, 이는 속도 차의 증감에 대해 운전자로 하여금 차로 변경을 유도하는 요소와 함께 저항하게 하는 요소가 있다는 것을 알 수 있었다. 분석결과. 2.0m/s 이상의 속도차에서 차로변경에 대한 저항이 상대적으로 크게 작용한다는 것을 알 수 있었으며, 도로 설계시 이를 반영하여 도로기하구조 및 안전성 등을 향상시킬 수 있을 것으로 보인다.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.383-389
• /
• 2015

The purpose of this study was to investigate the anti-apoptosis-related protein expression in skeletal muscle of rats with different amount of mountain ginseng (MG) added high-fat diet fed. Twenty-four Sprague Dawley male rats were divided into the high-fat diet control group (CON), 0.5% of MG added diet group (MG1), and 1.0% of MG added diet group (MG2) with eight rats each. The P53, anti-apoptotic protein, was significantly lower in MG2 than CON and MG1. The bcl-2 and bcl-xl, however, were not significantly different from MG1 but from CON. The caspase-9 and -3, were significantly lower in MG groups than CON. In addition, it was dramatically lower in MG2. These results suggested that MG addition to the high-fat diet suppressed p53 protein expression and enhanced anti-apoptototic protein expression. MG may be a positive effects on health as a medicinal plant.

• Korean Journal of Environment and Ecology
• /
• v.15 no.3
• /
• pp.257-266
• /
• 2001

Trail might be the primary recreational space to appear the use impact by visitors on ecological space in National park. On the basis of this concept, the carrying capacity was estimated on the trail. Impact rating class and pattern of passersby were surveyed on the 22 valid trails in Bukhansan National Park. Using two variables, the width of trail and amount of passersby, the correlation coefficient was analysed and the regression model was derived by raising x to a higher power. And carrying capacity estimation equation was devised by considering the pay fee visitors and average passersby in a trail section. With carrying capacity estimation equation to apply Bukansan National Park, it is desired that maximum carrying capacity is about 3 million persons a year under conditions of trail width 2.2m when National Park Authority wants to keep the existing management level. If they strengthen the management goal far resource conservation like that they want to keep the trail width 2.0m, the number of visitors might be decreased to about 2 million persons a year.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.427-434
• /
• 2009

Indigenous bacterium which shows a tolerance to high metal toxicity was isolated from soil concomitantly contaminated with oil and heavy metals. The characteristics of the bacterium for Pb and Cd biosorption was investigated under the various experimental conditions such as bacterial growth phase, the initial metal concentration, the input biomass amount, temperature and pH. The Langmuir adsorption isotherm modeling was described to know the capacity and intensity of biosorption. The low initial concentration of heavy metals and high biomass has a maximum heavy metal removal efficiency, but biosorption capacity of Pb and Cd has different values. Biosorption efficiency was highest in the end of the microbial growth stage and under pH 5~9 condition, but was less affected by temperature variation of 25~$35^{\circ}C$. The maximum biosorption capacity for Pb and Cd was 62.11 and 192.31 mg/g, respectively and each $R^2$ was calculated as 0.71 and 0.98 by applying Langmuir isothermal adsorption equation. Biosorption for Cd was considered as monomolecular adsorption to single layer on the surface of cells, whereas biosorption for Pb was considered as accumulation process into the cell by the microbial metabolism and precipitation reaction with anion of bacteria.

• Journal of Wetlands Research
• /
• v.12 no.1
• /
• pp.95-103
• /
• 2010

Discharge data examine the process of hydrologic cycle and used significantly in water resource planning and irrigation and flood control planning. However, it needs lots of time and money to get the discharge data. So discharge rating curve is usually used in converting discharge data. Therefore reliability of discharge rating curve absolutely depends on quality of discharge data. Many engineers who study hydrologic engineering make high quality discharge data to develop reliable discharge rating curve. And they carry out research on standard and method of discharge measurement, and equipment improvement. Now various flow meters are utilized to make discharge data in Korea. However, accuracy of equipment and experimental research data from measurement are not enough. In this paper, constant discharge flowed through standard concrete channel, and the velocity is measured using various flow meters. Also Discharge is calculated by measured data to compare and analyze. The equipment for the experiment is Price AA(USGS Type AA Current meter), flow meter, ADC, C2 small current meter, flow tracker, Electromagnetic current meter. The discharge got form various flow meters which are widely used for discharge measurement. The various depths of water were examined and compared such as 0.30 m, 0.35 m, 0.40 m, 0.45 m, 0.50 m, 0.55 m. The experiment progresses a round-measurement on 6-case. Wading measurement(one point method : the 60 % height in surface of the water) was applied to improve creditability and accuracy among measurement methods. USGS Type AA current Meter, Flow Meter, ADC, C2 Small Current meter got the certificate of quality guaranteed. So the results of experiment were used to compare discharge. The Results showed the difference based on USGS Type AA current Meter at average discharge and velocity. Electromagnetic current meter made differences over $\pm$ 10 % and Flow Meter made differences under $\pm$ 10 %. Also ADC, Flow Meter, C2 Small Current meter made differences under $\pm$ 5 %.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.2
• /
• pp.146-150
• /
• 1990

This study was conducted to investigate the genetic analysis of esterase isozymes in maize with tillers. The materials used for the study were stele tissue for five day old seedlings of IK inbred line with tiller and A-type inbred line with no tiller, their Fl and F,. The methods employed for the study were same as previous report by Lee and Choe. A total of thirteen isoesterase enzyme bands were identified and five zones were distinguised according to both migration distance and genetic segregation patterns. The E$\sub$0.3/, E$\sub$0.4/ and E$\sub$0.5/ loci appeared from orgin to 0.5cm migration distance were controlled by the two alleles in (IK/A-type)F$_2$ and the E$\sub$0.3/+E$\sub$0.4/ of variants was controlled by codominant alleles. The E$\sub$1.0/, E$\sub$1.2/, E$\sub$1.5/ and E$\sub$1.8/ loci appeared from 1.0cm to 1.8cm were also controlled by the two alleles. However, the null band was functioned alleles. The E$\sub$2.8/, E$\sub$3.0/ and E$\sub$3.5/ loci appeared from 2.8cm to 3.5cm migration distance were very active and near location. A total of individuals with two paried bands of these loci were more than those of three paired bands(x$^2$=0.327$\^$**/). The activity of bands appeared over 3.8cm were very low and these were controlled by the two alleles. In above results, genetic segregations of stele tissue of maize with tillers were suggested to be controlled by Mendelian genetic laws.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.514-521
• /
• 2009

The aim of this study was to evaluate the bonding ability of two self etch systems to human primary and permanent enamel and the effect of additional acid etching time. Exfoliated, caries free human primary molar(n=65) and permanent molar extracted (n=65) were used. prepared enamel specimens were randomly divided into 2 test groups and a control group. The control group(n=10) were treated with 35% phosphoric acid gel and Scotchbond Multi-purpose adhesive. Experimental groups(self-etching systems) were subdivided into 6 groups(each n=10) according to additional etching time(0s, 5s, 10s, 15s, 20s, 30s). The result were as follows : 1) The shear bond strengths of the self-etching adhesives(Clearfil SE Bond, Adper Prompt L-pop) without additional etching were lower than control group(Scotch Bond Multipurpose). 2) Between the same self-etch adhesive groups, additional etched groups showed higher shear bond strength 3) There was no significant difference between primary and permanent enamel. In conclusion, bond strength of self-etch adhesives to enamel could be increased with additional etching.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.360-366
• /
• 2004

This paper presents a method analyzing the motion of cylindrical buoy moored at 2 points and tensions action on each mooring line under the action of periodic waves. It was found that submersible buoy was more effective than floating one in the severe conditions considering its dynamic motions, wave forces, and mooring line tensions. The wave induced its dynamic responses and mooring line tensions peak when the ratio d/${\lambda}$ of the buoy length d to the waves length ${\lambda}$ was 0.66 due to its natural frequency. The results of this study were in agreement with the existing measurement ones, however, further verifications are needed considering resonance of cylindrical buoy and its displacements to wave height by a series of model tests.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.89-96
• /
• 1987

The denaturation mechanism of the protein during heating of myosin and paramyosin extracted from the ordinary muscle of yellowtail (Seriola qrinqueradits) and the adductor muscle of whelk (Neptunea arthritica cuming) were investigated by analyzing the hydrophobicity, solubility, SH group and protein-protein interaction. The free hydrophobic residue of the two proteins were increased by increase of heating temperature up to $65^{\circ}C$ and then decreased for further temperature raise. The protein-protein interaction was proportional to the increment of the free hydrophobic residue. The aggregation of protein was begun from $65^{\circ}C$ with the decrease of the free hydrophobic residues. The results of Arrhenius equation for the data on proteinprotein interaction showed that the denaturation course was made up with multi-steps in the myosin and two-steps in the paramyosin. The number of free hydrophobic residue and SH group, solubility and protein-protein interaction were significantly differed with the denaturation temperature (p<0.01).