• KSCI Review
• /
• v.14 no.2
• /
• pp.159-164
• /
• 2006

MES(Manufacturing Execution System) is a control system which supports basic activities(scheduling, working process and qualify management, etc) to execute working on the shop floor. As especially MES is a system to decrease the gap between production planning and operating, it executes functions that make decision between management and labor using real-time data. MES for real-time information processing requires certain conditions such as data modeling of RFID, which has recently attracted attentions, and monitoring of each product unit from manufacture to sales. However, in the middle of processing the unit with a RFID tag, transponders(readers) can't often read the tag due to reader's malfunctions, intentional damages, loss and the circumstantial effects; for that reason, users are unable to confirm the location of the product unit. In this case, users cannot avoid tracing the path of units with uncertain clues. In this paper, we suggest that the unique MES based on RFID and Bayesian Network can immediately track the product unit, and show how to evaluate it.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.290-291
• /
• 2015

병행하는 가공송전선로에서 휴전된 선로에 유도되는 전압은 수백에서 수만 볼트에 이른다. 이 때문에 휴전된 선로의 작업을 위해 선로의 양단 발 변전소에서 접지개폐기를 통하여 선로 접지를 하는 것은 물론 잔류 유도전압 제거를 위해 선로작업구간 근처 양단 철탑에도 접지를 시공하고 선로작업을 시행한다. 선로작업 완료 후 가압 시 발 변전소의 접지개폐기 개폐상태는 근무자가 감시제어시스템을 이용하여 확인 가능하다. 개폐기간 인터록시스템으로 접지상태에서 선로가압은 불가하지만, 선로에 작업자가 설치해 놓은 접지선이나 접지설비 등은 발 변전소 운전자가 접지제거 상태를 작업자에게 인위적으로 확인한 후 가압하는 방법으로 인하여 인적 실수에 의한 접지 중 가압되는 선로고장이 종종 발생되고 있다. 이러한 고장을 방지하기 위한 선로 상 접지 모니터링 시스템의 필요성이 있다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.165-173
• /
• 2014

Open-pit mining method, is safe relatively work as compared with underground mining. And high yield, low production cost, has the advantage that it can provide a lot of production. But deforestation, tailings and slag deposition, mineral debris, dust, water, noise, land subsidence, sediment runoff discharge, I have internalized environmental disaster predisposing factors, such as landslides. Thus, it may be noted, also by typical environmental regulations. We try to deal with the changes in open pit terrain and environment related issues. Then, use the recovery period and the open pit mine and ecology off the gun, environment-friendly development of accurate monitoring methods, systems of this development is required. The use of open platforms and open source GIS tools have been developed during this period, it needs to develop spatial information environment monitoring system open pit mine construction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.888-888
• /
• 2012

본 연구는 3년(2008~2011년)간의 연구기간동안 저탄장에서 발생하는 유량과 수질농도를 분석하여 저탄장의 비점오염 유출특성을 파악하고자 하였다. 연구지점은 강원도 태백시에 위치한 가행 광산으로써 광산작업으로 인해 생산되는 비축탄(석탄과 광재)을 저장하는 대규모 저탄시설이다. 저탄장에는 강우로 인해 발생하는 강우유출수의 오염물질 배출량을 줄이기 위해 콘크리트 배수로와 침사지 시설이 설치되어 있다. 침사지를 거쳐 하천으로 유입되기 전에 강우유출수의 모니터링을 위해 모니터링 시설(유량계, 자동수질시료채취기, 강우량계)을 설치하여 유량과 농도를 측정하였다. 또한 정확한 강우량 측정을 위해 자기우량계를 설치하였다. 연구결과 강우에 의해 유출이 발생한 최저 강우량은 6.0 mm 인 것으로 나타났으며, 강우사상의 강우량은 6.0~248.4 mm의 범위로 나타났다. 이때 평균 강우강도는 0.6~13.1 mm/hr 인 것으로 나타났으며, 강우에 발생한 강우유출수의 유출률은 0.02~0.40으로 나타났다. 저탄장의 경우 저탄장의 표면을 비닐 캔버스로 덮어두기 때문에 불투수층이 많아 6.0 mm 정도의 적은양의 강우가 발생해도 유출이 발생하는 것으로 나타났다. 각 강우사상의 EMC 농도는 SS 6.5~712.3 mg/L, $COD_{Cr}$ 11.6~263.9 mg/L, $COD_{Mn}$ 3.4~106.8 mg/L, $BOD_5$ 1.0~56.0 mg/L, TN 0.145~5.600 mg/L, TP 0.101~2.526 mg/L, DOC 0.6~22.0 mg/L로 나타났다. 저탄장에서 측정된 수질농도는 기존 가행 광산에 관한 연구에 비해 SS 농도가 낮게 산정 되었으며, 이는 저탄장에 설치되어 있는 침사지 시설의 영향인 것으로 판단된다. 본 연구의 결과는 저탄장에서 발생하는 비점오염원의 유출특성을 파악하고, 모델링이나 환경정책에 필요한 기초자료로 활용할 수 있을 것으로 판단된다. 그러나 강우량, 면적, 피복율 또는 침사지 시설 등의 영향에 대한 추가적인 모니터링을 통한 다각적인 분석의 연구가 진행되어야 할 것으로 판단된다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.3
• /
• pp.133-141
• /
• 2020

In this paper, the communication method of data information accepted by underwater drones and the implementation method to console display of data information were described, and the function of integrated monitoring system interface and the design and implementation of sonar interface were explained. The operation and posture of underwater drones can be controlled using a controller connected to the console, and the distance information between underwater drones and obstacles is obtained from sonar so that they can be visually displayed on the console screen along with camera images. The integrated monitoring navigation console is implemented to suit improvements, making it convenient and easy for workers to use. In addition, by upgrading integrated monitoring and control software functions, the company added user-specific project management functions and the output of reports for hull inspection to make them different and competitive from other underwater drones.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.41-46
• /
• 2015

This study was conducted to evaluate the use of biological monitoring to determine the factors that influence the effects of exposure to pyrethroid pesticides among highland cabbage farmers. Urine was collected from farmers who was cultivating Chinese cabbage in the relatively highground in Gangwon-do the morning following pesticide application and was analyzed for cis- and trans-3-(2,2-dichlorovinyl)-2,2-dimethylcy-clopropane carboxylic acid (DCCA) and 3-(2,2-dibromovinyl)-2,2-dimethyl cyclopropane carboxylic acid (DBCA). Factors affecting exposure to pesticides, such as wind speed, spraying location, and the use of protective gear, were also investigated. Statistical analysis was performed by the Kruskal-Wallis test. Our analysis indicated that highland cabbage farmers were exposed to a higher level of pesticides than the general public or other types of farmers. When the wind speed was low, workers who sprayed pesticides were exposed to a higher level of pesticides compared to the exposure level in an assistant. However, there was no difference in exposure between the two when wind speed was high.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.118-121
• /
• 2022

국내 산업재해 사고 사망자의 상당수가 건설업에서 발생하고 있다. 건설 현장에는 굴삭기, 크레인과 같은 중장비가 많고 높은 곳에서 작업하는 경우가 흔해 위험 요소에 노출될 가능성이 높다. 물리적 사고 외에도 작업 중 발생하는 미세먼지에는 여러 유해 인자가 존재하여 건설근로자들에게 호흡기질환과 같은 직업병을 유발한다. 정부에서는 산업현장 안전 관리의 중요성이 증가함에 따라 각종 산업재해로부터 근로자를 보호하기 위한 법안을 마련하였다. 따라서 건설 현장의 경우 산업재해를 방지하기 위해서 위험요소를 사전에 인지하고 즉각 대응할 수 있는 기술이 필요하다. 본 연구에서는 인공지능(AI)과 사물인터넷(IoT)을 통한 자동화 기술을 활용하여 24시간 안전 관리 시스템을 제안한다. 제안하는 IoT 기반 통합안전 관리 시스템은 AI를 적용한 CCTV를 통해 산업 현장을 모니터링하고, 다수의 IoT 센서가 측정한 수치를 근로자 및 관리자가 실시간으로 확인할 수 있게 하여 산업 현장 내 안전사고를 예방한다. 구체적으로 어플리케이션을 통해 미세먼지 농도, 가스 농도, 온도, 습도, 안전모 착용 여부 등을 모니터링할 수 있다. 모니터링 중에 유해물질의 농도가 일정 수치를 넘기거나 안전모를 착용하지 않은 근로자가 발견될 경우 근로자 및 관리자에게 경고 알림을 발송한다. 유해물질 농도는 IoT 센서를 통해 측정하며 안전모 착용 여부는 카메라 센서에 딥러닝 모델을 적용하여 인식하였다. 본 연구에서 제시한 통합안전관리시스템을 통해 건설현장을 비롯한 산업현장의 산업재해 감소와 근로자 안전 증진에 기여할 수 있을 것으로 기대한다.

• Journal of Bio-Environment Control
• /
• v.31 no.2
• /
• pp.79-89
• /
• 2022

With the wide use of greenhouses, the working hours have been increasing inside the greenhouse for workers. In the closed ventilated greenhouse, the internal environment has less affected to external weather during making a suitable temperature for crop growth. Greenhouse workers are exposed to organic dust including soil dust, pollen, pesticide residues, microorganisms during tillage process, soil grading, fertilizing, and harvesting operations. Therefore, the health status and working environment exposed to workers should be considered inside the greenhouse. It is necessary to secure basic data on particulate matter (PM) concentrations in order to set up dust reduction and health safety plans. To understand the PM concentration of working environment in greenhouse, the PM concnentrations were monitored in the cut-rose and Hallabong greenhouses in terms of PM size, working type, and working period. Compare to no-work (move) period, a significant increase in PM concentration was found during tillage operation in Hallabong greenhouse by 4.94 times on TSP (total suspended particle), 2.71 times on PM-10 (particle size of 10 ㎛ or larger), and 1.53 times on PM-2.5, respectively. During pruning operation in cut-rose greenhouse, TSP concentration was 7.4 times higher and PM-10 concentration was 3.2 times higher than during no-work period. As a result of analysis of PM contribution ratio by particle sizes, it was shown that PM-10 constitute the largest percentage. There was a significant difference in the PM concentration between work and no-work periods, and the concentration of PM during work was significant higher (p < 0.001). It was found that workers were generally exposed to a high level of dust concentration from 2.5 ㎛ to 35.15 ㎛ during tillage operation.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.137-145
• /
• 2022

The usability evaluation of the remote fluid monitoring device, which was introduced to reduce the work of nurses and increase the efficiency, was performed due to the expansion of the non-face-to-face medical system. Remote fluid monitoring is a fusion of various technologies such as fluid measurement and analysis, error correction technology, and transmission technology. The range of use by users, the information they want to obtain, and the control device, etc. are wide, and the factors that evaluate the product are also diverse. Therefore, it is difficult to improve the product through evaluation. In this study, a quantitative index was developed to help improve the product for commercialization by conducting 20 usability evaluations in three areas of product stability, operability, and satisfaction with the remote sap monitoring system device. It was performed through infrared and load cell-type sap monitoring devices. In terms of stability, there was a difference in installation work such as fixing the pole of the device, and high satisfaction was shown for operability and accuracy. In terms of product satisfaction, the satisfaction of load cell devices was generally high.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1138-1142
• /
• 2011

This paper proposes the Alert System, the purpose of which is to detect an accident and to take care of it quickly in a working place. In the previous studies, a wireless network system was suggested using 'Star Topology'. However, this study constructs the wireless network system of Peer-to-Peer Topology, which allows to build more efficient network for communication. Also, with this system it is possible to check other the worker's situation through double sensing with Temperature/Gas sensor and Inclination sensor. In order to take action quickly, the Alert System is using a monitoring program which visualizes a worker's situation and the area where an accident occurs.