• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.298-302
• /
• 2006

This study was carried out to establish low-input fertilization and seeding technique using the simultaneous with seeding and fertilizer application machine and band spotty applicator which were manufactured for experiment during cultivation of mulching for peanut(Arachis hypogaea L.). The labor hour for seeding by simultaneous with seeding and fertilizing machine was appeared over 90% reduction effect compared with control plot($17.3hr\;10a^{-1}$). In band spotty fertilization plots, the emergence date was delayed about 4 days and the seedling stand rate was decreased 11~18% compared with control plot(man power). The content of total nitrogen of soil after experiment was increased while the contents of organic matter, available phosphate and exchangeable potassium were decreased than before experiment. The content of nitrogen forming nitrate was increased in band spotty fertilization(BSF) plots by increasing the amount of applied fertilizer from early growth stage till the middle growth stage. Growth rate was increased in band spotty fertilization plots and the absorbed amount of phosphate and potassium for peanut were increased in 70% band spotty fertilization plot compared with control plot. Yield of peanut was increased 70% in band spotty fertilization plot due to high pod kernel ratio and ripened pod rate compared with control plot($3,150kg\;ha^{-1}$). It was found that 70% band spotty fertilization was more effective as fertilization method to reduce both environmental pollution and chemical nitrogen fertilizer in plastic film mulching cultivation of peanut.

• Archives of design research
• /
• v.17 no.2
• /
• pp.95-104
• /
• 2004

Creativity is a important keyword for users as well as for main design organization who needs it. But little attention has been given to the aspect of user's creativity, also there has been a few attempt to apply it into design development until now. Nowadays in design areas, user's experiences and actions are changing the passive states receiving meanings into the active states creating meanings voluntarily. It is resonable to suppose that creative stage is important for users and they have the possibility of new ideas of uses and creating new productions. User's experiences of objects includes that of being formed or supported previously and that of voluntary interpretations acquired for himself, which it may be the possibilities predicted in design process or unknown user's action areas. It is likely that creative use process by themselves are the actions applied and deviated from usability and function by main design organization, also creative productions are arranged and made by users. These have a scope of examination and research in probability that is occurs frequently in user. In this research, approaching with a term, 'User gestures', User gestures are the characteristic action areas based on user's voluntary behaviors, where are revealed a unessential and non-operational function as a action itself and various transformation and creation of products as a outcome of action. This fact proves clearly that user gestures have a worth of alive spectrum to observe aspects of user culture and could be a attractive approach to seek easily new design concept for designer and developer. A further direction of this study will be following areas, Ethnography methods research of user gestures, Cultural research to phenomenon of user design and UGSBD(User gesture scenario based design) research. And it seems probable that they are applied in design development as follows, User initiative customization products, User participatory recycling products and creativity-experience design.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.349-355
• /
• 2014

This study was performed to evaluate influences of tunnel covering materials and seeding dates on the growth and productivity of water spinach (Ipomoea aquatic F.) cultured early in unheated greenhouse. During tunnel installation period, from March 5 to April 30 and from October 11 to November 10, air and soil temperature in tunnel covered with polyethylene film (PEF) had risen $2.0-2.4^{\circ}C$ and $0.9-1.0^{\circ}C$, respectively, compared to those in non-tunnel (NT). Air and soil temperature in tunnel with illite non-fabric (INF) also had risen $1.6-1.8^{\circ}C$ and $0.6-0.8^{\circ}C$, respectively. Especially, it showed greater effects of the rise at low temperature time zones of the day. In plots of seeding on March 15 in tunnel covered with PEF or INF, temperature during emergence period, emergence days and rate were similar to plot seeding on April 5 in NT. There were two more harvesting in plots of seeding on March 5 or March 15 in tunnel, and increasing of total yield by 22.5-25.7% compared to plot of seeding on April 5 in NT. But there was observed no significant differences between PEF and INF. Whereas PEF was necessary to be removed at midday sometimes because it had risk of high temperature injury, INF was not necessary. All above suggest that it was suitable to sow seed on the middle of March in tunnel covered with INF, for early culture of water spinach in unheated greenhouse.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.6-11
• /
• 1989

This investigation was conducted to get basic informations on land consolidation works and soil management for arable land. The characteristics of geometrical features of mapping units in the detailed soil maps of Korea were measured from 70 soil series (565 soil phases) by using a picture analysis system. The results obtained were as follows: 1. The mean values of the mapping units in extent, periphery, diameter of long axis and short axis, roundness and number of acute angles were 22.0ha, 2.267m, 911m, 0.104, and 3.5, respectively. It was suggested that "Simplicity Index of Mapping Unit", $=\frac{Extent\;in\;ara}{Length\;of\;boundary\;periphery\;in\;meter}{\times}\frac{1}{number\;of\;acute\;angle}$ be valuable to judge the complexity degrees of mapping units. 2. The size of mapping unit among physiographyic position was shown in order of Alluvial plains > Fluviomarine plains > Terraces > Hills > Fans > Mt. foot slopes > Valleys, and the simplicity index of mapping units also showed similar order of the extent. 3. The size and the simplicity index of the soils developed on plains with silty textured imperfectly drained were higher than the soils developed on sloped land with loamy textured. As the slopes getting steeper or relatively better in soil drainage, the size and the simplicity index became smaller. 4. The relationship between the simplicity index and the size of the farm unit divides by the land consolidation works was positively correlated. And it was concluded that the parcelling of the farm unit divides by the planning of land consolidation should be based on the soil boundaries of the detailed soil maps for mechanized or collaborated farming.

• Journal of Intelligence and Information Systems
• /
• v.28 no.4
• /
• pp.41-59
• /
• 2022

The timely procurement of military supplies is essential to maintain the military's operational capabilities, and contract work is the first step toward timely procurement. In addition, rapid signing of a contract enables consumers to set a leisurely delivery date and increases the possibility of budget execution, so it is essential to improve the contract process to prevent early execution of the budget and transfer or disuse. Recently, research using big data has been actively conducted in various fields, and process analysis using big data and process mining, an improvement technique, are also widely used in the private sector. However, the analysis of contract work in the military is limited to the level of individual analysis such as identifying the cause of each problem case of budget transfer and disuse contracts using the experience and fragmentary information of the person in charge. In order to improve the contract process, this study analyzed using the process mining technique with data on a total of 560 contract tasks directly contracted by the Department of Finance of the Air Force Logistics Command for about one year from November 2019. Process maps were derived by synthesizing distributed data, and process flow, execution time analysis, bottleneck analysis, and additional detailed analysis were conducted. As a result of the analysis, it was found that review/modification occurred repeatedly after request in a number of contracts. Repeated reviews/modifications have a significant impact on the delay in the number of days to complete the cost calculation, which has also been clearly revealed through bottleneck visualization. Review/modification occurs in more than 60% of the top 5 departments with many contract requests, and it usually occurs in the first half of the year when requests are concentrated, which means that a thorough review is required before requesting contracts from the required departments. In addition, the contract work of the Department of Finance was carried out in accordance with the procedures according to laws and regulations, but it was found that it was necessary to adjust the order of some tasks. This study is the first case of using process mining for the analysis of contract work in the military. Based on this, if further research is conducted to apply process mining to various tasks in the military, it is expected that the efficiency of various tasks can be derived.