• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1991.07a
• /
• pp.25-29
• /
• 1991

최근 해안종합개발 및 항만시설의 확장에 따라 해안 및 항만구조물의 건설공사가 날로 증대되고 있다. 이러한 구조물의 건설에 있어서 합리적인 시공계획을 수립하기 위해서는 기상, 해상 및 공사의 종류에 따른 작업가능일수의 추정이 중요하다. 이 작업일수는 공법의 결정, 공사비의 적산, 공사기간의 산정 등에 있어서 중요한 요소임에도 불구하고 지금까지도 육상의 토목공사 등에서 사용하고 있는 월간작업일수 20일을 해역별 (외항, 내항), 공종별 구분없이 해상작업에도 적용하도록 규정해 놓고 있는 실정이다.(중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.513-521
• /
• 2008

The objective of this study is the evaluation of the impact on the construction condition due to historical observation data and IPCC SRES A2 climate change scenario. For this purpose, daily precipitation and daily mean temperature data which have been observed over the past 30 years by Korea Meteorological Administration are collected and applied. Also, A2 scenarios during 2011~2040 and 2051~2080 are used for this analysis. According to the results of trend analyses on annual precipitation and annual mean temperature, they are on the increase mostly. The available working day and the day occurred an extreme event are used as correlation indices between climate factor and construction condition. For the past observation data, linear regression and Mann-Kendall test are used to analyze the trend on the correlation index. As a result, both working day and extreme event occurrence day are increased. Likewise, for the future, variation analysis showed the similar result to that of the past and the occurrence frequency of extreme events is increased obviously. Therefore, we can project to increase flood damage potential on the construction site by climate change.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.117-124
• /
• 1994

A study was conducted to dectermine the days with optimum soil moisture after drainage or rain for machine workability and seeding establishment on dry seeding in paddy soils(Jeon buk Series, Haplaquepts). The results are summarized as follows. 1. The possible days of tractor-rotary plough were 5days or more for non-mole hole plot(control). The possible days were 2~4days and the optimum days were 5~6days for mole hale plat. 2. The ratio of soil clod(<1cm) was 1 % and 15% for control and mole hole plats, respectively. The optimum soil moisture range for seeding establishment was 31~32% in this soils. 3. The possible days of combine harvesting work were 9days and 5days after drainage for control and mole hole plots, respectively. 4. Soil physical properties were improved but soil organic matter calcium and magnesium in the soil were decreased in the mole hole plats. 5. Yield was 415kg/10a at seeding after 6day drainage in control and 440kg/10a at seeding after 4day drainage in the mole plots.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.669-676
• /
• 2018

Schedule management in construction work is an important step for determining the construction period. On the other hand, there is a difference between the planned schedule and execution schedule because the estimation and calculation of Non-Working days, in which possible at the design stage is not performed properly. This paper proposes a method for estimating the working days by analyzing characteristics of the major work type and estimating the Non-Working days reflecting the Chuseok and New Year Holidays, which is the closest method to the actual work in the schedule planning. By applying the correction factor of the existing method and the improved method for the same construction in the same site, improved method was reduced by 22 days (9.1%) based on the actual working days. The importance of schedule management was confirmed as an example by comparing the data before and after the application of the standard (plan). These results show that the schedule delays, which are caused by the inconsistency between actual working days calculation that had been practiced conventionally and the working days on the schedule table, can be prevented. In addition, it will help to establish a schedule plan that is closer to reality.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.72-80
• /
• 2020

Two strategies for calculating economic feasibility are the machine rate and cash-flow methods. This study used the cash-flow method to evaluate the economic feasibility of the HAM300 yarding operation for extracting tree length logs in Larix kaempferi forest stands. In financial analysis based on 7-year cash-flow, the net present value and pay-back period method were used. We analyzed two scenarios: operating opportunities (50, 100, 150, and 200 days per year) and productivity change yield (7.5 and 10.5 ㎥/scheduled machine hour: SMH). The analysis indicated that high rates of return on extraction activity investment can be achieved when machines are used for >150 days per year. In addition, improved productivity (10.5 ㎥/SMH) increased financial feasibility compared to current productivity (7.5 ㎥/SMH) when machines were operated for 100 days per year. These results suggest that the appropriateness of HAM300 harvesting depends on the number of annual operating days and productivity.

• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.36-46
• /
• 1995

The number of possible working days is one of the major factors for estimating the coverage area of a combine harvester. The percentages of possible working days at 24 locations were presented by analyzing the amount of rainfall during the working periods of rice harvesting from the end of September to the end of October for past 20 years. The percentages of possible working days ranged from 75% to 85% in most cases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.601-608
• /
• 2021

Recently, despite a decrease in the number of working days and an increase in the number of non-working days due to an increase in the abnormal climate and the revision of the Labor Standards Act, a standard construction period reflecting this has not been established. For this reason, even if the appropriate construction period is calculated at the site, there is a situation where delays occur due to unexpected circumstances. Therefore, this study proposes a method of calculating the number of non-working days for railway bridgework construction that reflects changes in construction conditions and climate change and reflects this to railway bridgework construction, and the number of working days was calculated. As a result, the number of non-working days by region and month in Korea was derived, and through this, the necessity of regulations and standards for appropriate construction periods reflecting regional characteristics and characteristics of each construction type was presented.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.298-300
• /
• 2001

본 논문에서는 웹, 모바일 환경에 적응 가능하고, 다양한 서비스의 지원이 가능한 글로벌 Peer-to-Peer(P2P) 엔진에서 서비스 모듈, 네트워크 모듈, 레파지토리 모듈간에 발생되는 메시지를 처리하는 메시지 디스패쳐의 설계 경험을 기술한다. P2P엔진이 이 기종 네트워크환경에 적응 가능하고, 다양한 서비스들을 동시에 지원하기 위해서는 피어 간 또는 엔진 내부에서 발생하는 많은 메시지들을 원활히 처리하는 모듈이 필요하다. 이를 위하여 메시지 처리를 위한 글로벌 P2P 엔진의 메시지 디스패쳐를 제안한다. 메시지 디스패쳐는 글로벌 P2P엔진에서 지원하는 서비스 또는 다른 모듈에서 발생하는 메시지들을 우선순위와 마감시간을 이용하여 작업순서를 배열하는 Message Queue, Message Queue에 적재된 메시지들을 분석하여 처리하는 Message Processor, 메시지 디스패쳐와 서비스 또는 각 모듈간의 메시지의 전달을 위한 공유 버퍼인 Service Buffer로 구성되어져 있다. P2P 엔진에서 메시지 디스패쳐를 이용하게 되면 다양만 서비스에 적응가능하고, 모듈간의 투명성을 제공하고, 신속한 메시지의 처리가 가능하게 된다.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.88.1-88.1
• /
• 2014

국립고흥청소년우주체험센터는 2014년 11월에 1,040mm의 반사망원경을 도입할 예정이다. 그 사전 준비로 천체관측소 10m돔에 150mm 굴절망원경과 1K CCD카메라를 설치하고, 이를 통합 제어할 원격관측시스템을 구축하였다. 원격으로 제어가 가능한 이 시스템은, 망원경 구동부, CCD, 돔을 제어할 수 있는 소프트웨어, 각 기기를 원격에서 조정 작동할 수 있는 장비, 기상과 하늘의 실시간 상황 및 망원경의 상태를 확인 할 수 있는 원격 모니터링 카메라 등으로 구성되어 있다. 구축 이후 M67 산개성단과 SA98 표준성 영역을 원격으로 관측하였다. 이를 통해, 관측시에 발생할 수 있는 문제점과 장애요인을 분석하여 보완 개선하였고, 시범관측으로 확보한 자료를 활용하여 관측환경을 정량화하는 중이다. 최우선 과제는 센터가 위치한 내나로도 지역의 시상정보를 검증하고 축적하는 일이다. 센터는 천체관측소에 시상 관측기 설치하여 자료를 축적하고 있다. 이 정보의 신뢰성을 확보하기 위해 150mm 굴절망원경으로 얻어진 시상정보와 비교 검증하고자 한다. 또한 이 과정에서 센터 천체관측소에 구축된 망원경으로 관측 가능한 한계등급을 얻을 수 있었고, 표준계 변환작업을 통해 1차와 2차 소광계수를 구해 보았다. 추가적으로 관측 가능한 일수를 지속적으로 기록하여, 계절별, 월별 관측 가능일 수를 조사할 예정이다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.3
• /
• pp.2372-2387
• /
• 1971

1. Being seen at the table (20), the number of days which monthy average air temperatures are three degrees of Celsius thermometer($3^{\circ}C$) or more, is the highest marks to be 365 days at Cheju, secondly, 334 days at Pusan, and, Ulsan, Pohang, Mokpo,Yosu and Ullung-Do which all are coastal region are all 306 days, besides, all north area of Taegu and Kwang ju have 275 days consquently, there are 90 days, differance between maximum and minimum. 2. Being seen at the table(22), freezing dates to be influenced upon earth works are obtained, if (1) item is subtracted from 365 days one year. 3. Being seen at the table(18), number of rainy days of which records are 1 millimeter and over to be influenced upon earth through works, days which monthly average air temperatures are $3^{\circ}$ or more, is the maximum to be 100 days at Cheju and its minimum is 60 days at Taegu. Every other region show 70 days or so. But Ullung-Do is 90 days. 4. Being seen at the table (26), the numbers of annual earth works possibility days(4) are obtained, if the values (3) which number of rainy days more than 1 millimeter during the same period are multiplied by 1.27(coefficient of hindrance to earth works) are subtracted from the number of days which monthly average air temperatures $3^{\circ}$ or more [(1)-(3)=(4)]. 5. The number of annual earth works possibility days by regional groups is the maximum to be 242 days at Pusan, and Cheju are 239 days. Other regions are from 218 days to 181 days, namely, they are about 200 days.