• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.124-127
• /
• 2010

본 연구에서는 통가 해역 라우분지의 열수 광상 가능성이 있는 해산들에 대하여 자력탐사가 수행되었다. 그 중 TA 09 해산에 대하여 심해견인 자력탐사가 실시되었으며 심해견인 자력탐사는 정밀한 탐사를 위하여 해저면에서 약 50 ~ 60 m 고도를 유지하며 자력계를 견인하였다. 탐사지역의 총 자력 성분은 Overhauser Proton Magnetomer (모델 SeaSPY 300(해상자력계)m, SeaSPY 6000(심해견인자력계))를 이용하여 측정되었다. 탐사 해산들 중 해상자력탐사와 심해자력탐사가 같이 수행된 TA 09 해산과 주요 열수 광상 유망 지역으로 분류되는 TA 12, 26 해산에 대해서만 측정된 지자기값을 이용하여 자기이상도를 구하였으며 자화역산법을 이용하여 자화이상도를 제작하고 분석하였다. TA 09 해산과 TA 26 해산에서의 해상 자기이상도는 쌍극자 이상형태의 단순이상을 보이며 TA 12 해산에서는 정상부에 고이상이 나타나고 그 주변으로는 저이상대가 분포하고 있다. TA 09 해산에서의 해상자력계에 의한 자기이상치와 심해견인자력계에 의한 자기이상치를 비교하여 보면 거의 10배 이상의 해상도 차이를 보여준다. 연구지역 탐사해산들의 해저지형과 비교하여 보면 열수분출대의 가능성이 높은 저자화이상대들은 주로 해산의 정상부 및 정상부 칼데라와 그 칼데라 주변부에 주로 위치하고 있는 모습을 나타내고 있다. 향후 타 탐사 해산들에 대한 자기이상에 대한 정밀처리/분석 후 탄성파 탐사결과, 암석샘플의 결과 및 지화학결과 등과 비교하여 열수광상의 존재 여부 및 위치 추정 분석이 필요할 것으로 판단된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.9
• /
• pp.1101-1108
• /
• 2008

This study was carried out to compare the physiological activities of the extracts from Korean and Chinese Viola mandshurica W. Baker. The water extract from leaves of Chinese V. mandshurica exhibited the highest extraction yields of 30.45 g/100 g and the highest content of total flavonoids as 102.30 mg/g. Also, its ethanol extract showed the best content of polyphenol compounds as 136.16 mg/g. The leaf extract of Korean V. mandshurica produced higher electron donating abilities (EDA) of 92.69% (KLW) and 93.61% (KLE) than the other fractions. The strongest SOD-like activity was shown in the ethanol extract from Korean leaves of 17.28% at the concentration of 1.0 mg/mL. The nitrite scavenging abilities (NSA) of the leaf extracts of V. mandshurica from China were intense over 50% at pH 1.2 and 3.0. In the results of inhibitory rates of xanthine oxidase (XO), both ethanol extracts from Korean and Chinese leaves were higher than the other fractions as 98.67% and 93.80% respectively. Effect of tyrosinase inhibition was the highest in the water extract (45.04%) of Chinese leaves, followed by its ethanol extract (31.36%). The results of EDA, SOD-like activity and XO inhibition of the leaf extracts from Korean V. mandshurica were higher than those of Chinese, on the other hand, determinations on total polyphenol contents, NSA and tyrosinase inhibition were higher in those of Chinese.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.699-705
• /
• 2008

This study compared amino acids and effective components of Viola mandshurica produced in Korea with those of Chinese plants, as part of a study on nutritional andfunctional materials, to aid in the development of a valuable food. The contents of reducing sugar, free sugar, polyphenols, and soluble protein in the flowers of V. mandshurica were higher than in other fractions, being 10,485.11 mg%, 118.85 mg%, 1,259.26 mg%, and 23.67 mg%, respectively. Total flavonoid content of Chinese leaves was the highest at 2,370.75 mg%, followed by 1,844.43 mg% in Korean leaves. Free amino acids were highest in Korean leaves (5,345.21 mg%), followed by roots (4,692.24 mg%), flowers (3,807.87 mg%), and leaves of China plants (3,613.81 mg%). Arginine accounted for 55% of free amino acids in the roots, and all plant fractions contained more valine, aspartic acid, glutamic acid, alanine, and arginine, than other amino acids. The total content of amino acid derivatives was the highest (9,058.80 mg%) in Korean leaves. Especially, $\alpha$-aminoadipic acid constituted over 50% of total amino acid derivatives in all plant parts of V. mandshurica. When mineral contents were analyzed, leaves grown in China showed the highest content of 5,917.57 mg%, and the contents of K, Ca, and Mg were much greater than those of other minerals, together comprising over 95% of total mineral content in leaves and flowers from Korea.

• Journal of the Korean Magnetics Society
• /
• v.17 no.5
• /
• pp.188-193
• /
• 2007

We simulated the magnetization reversal behavior of submicron-thickness magnetic films by applying pulses of sub-ns-long durations and amplitudes along the easy axis. The films were rectangular and elliptical $Ni_{80}Fe_{20}$, and their thickness was 2 nm and 4 nm. We observed different behaviors depending upon the shape and thickness of the films and found a normal non-switching in regions in which we expected complete switching after relaxation. In the elliptical film, the non-switching regions were found to be random and to be widely distributed throughout the switching map. The strong demagnetization field along the z-axis, the film thickness direction, is likely responsible for this abnormal behavior. In the rectangular film, the abnormal non-switching regions were less distributed than they were in the elliptical film due to edge domains resulting from the small $M_z$ or demagnetization field during the switching. Our simulation confirms that large demagnetization is detrimental to the ultra-fast magnetization reversal of magnetic ultra-thin films.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.19-25
• /
• 2013

Recent progress in Martian exploration identified hematite as the major candidate for the strong magnetic anomalies observed in Martian lithosphere. In the present study, grain-size dependence of thermoremanent magnetization and low-temperature stability of room-temperature saturation isothermal remanent magnetization (RTSIRM) were monitored using synthetic hematites. For hematite, the antiferromagnetic spin configuration is re-arranged from being perpendicular to the c-axis to be parallel to the c-axis below the Morin transition ($=T_M$). A large fraction of RTSIRM is demagnetized at $T_M$ (= 260 K) during zero-field cooling from 300 K to 10 K. About 37% of the initial RTSIRM is recovered on warming from 10 K to 300 K. Shallow Martian subsurface at 1~2 km depth would experience low-temperature cooling-warming of $T_M$ because average Martian surficial temperature is about 220 K. However in most Martian lithosphere whose temperatures are higher than 260 K, the very stable magnetic memory of hematite could be a contributor to Martian magnetic anomalies.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.17-26
• /
• 2009

On Aogashima Island, a volcanic island located in the southernmost part of the Izu Seven Islands Chain, vector magnetic anomalies were obtained in a helicopter-borne magnetic survey. The purpose of this study was to understand the volcanic structure of Aogashima Island in order to mitigate future disasters. Commonly, to obtain the magnetic structure of a volcanic island, total intensity anomalies (TIA) have been used, even though they have intrinsic errors that have not been evaluated correctly. Because the total intensity magnetic anomaly (TIA) is not a physical value, it does not satisfy Maxwell's Equations, Laplace's Equation, etc., and so TIA is not suitable for any physical analyses. In addition, it has been conventionally assumed that TIA is the same as the projected total intensity anomaly vector (PTA) for analyses of TIA. However, the effect of the intrinsic error ($\varepsilon_T$ = TIA.PTA) on the analysis results has not been taken into account. To avoid such an effect, vector magnetic anomalies were measured so that a reliable analysis of Aogashima Island magnetization could be carried out. In this study, we evaluated the error in TIA and used vector anomalies to avoid this erroneous effect, in the process obtaining reliable analysis results for 3D, vector magnetization distributions. An area of less than 1 A/m magnetization was found in the south-west part of Aogashima Island at the depth of 1.2 km. Taking the location of fumarolic activity into consideration, the lower-magnetization area was expected to be the source of that fumarolic activity of Aogashima Island.

• Journal of Korean Society of Forest Science
• /
• v.79 no.3
• /
• pp.290-301
• /
• 1990

The 167 plus tree clones of Pinus koraiensis in clone bank planted in 1983 were investigated for time of flowering, rate of flowering, and number of flowering from 1986 to 1989. The results were as follows : 1) There were clones in the minority which do not cross in natural pollination between earlest flowering female clones and latest shedding male clones. 2) The rate of male flowering appeared less than rate of female flowering and received influence of genetic more than rate of female flowering. 3) The numbers of flowering in female and male flower were affected by small number of clones. 4) The flowering number for female strobili was not related to the flowering number of male flower. The 42 clones among 167 clone had not male flower. 5) The flowering number of 167clones were classified three groups in female flower and four groups in male flower by L.S.D 5% test. 6) The clones with abundant female and male flower were selected based on the component analysis. 7) As Based on flowering rate and number of female, the juvenile phase of plus tree clones appeared to be until four years after grafting ; the transition period appeared to be from five to seven years after grafting ; the adult phase appeared to begin from eight years after grafting, 8) The grafted trees of Pinus koraiensis appeared early flowerring about six years compared with seedling trees.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.99-102
• /
• 2000

• Geophysics and Geophysical Exploration
• /
• v.27 no.2
• /
• pp.119-128
• /
• 2024

Marine magnetic surveys provide a rapid and cost-effective method for pioneer geophysical survey for many purposes. Sea-surface magnetometers offer high accuracy but are limited to measuring the scalar total magnetic field and require dedicated cruise missions. Shipboard three-component magnetometers, on the other hand, can collect vector three components and applicable to any cruise missions. However, correcting for the ship's magnetic field, particularly viscous magnetization, still remains a challenge. This study proposes a new additional correction method for ship's viscous magnetization effect in vector data acquired by shipboard three-component magnetometer. This method utilizes magnetic data collected simultaneously with a sea-surface magnetometer providing total magnetic field measurements. Our method significantly reduces deviations between the two datasets, resulting in corrected vector anomalies with errors as low as 7-25 nT. These tiny errors are possibly caused by the vector magnetic anomaly and its related viscous magnetization. This method is expected to significantly improve the accuracy of shipborne magnetic surveys by providing corrected vector components. This will enhance magnetic interpretations and might be useful for understanding plate tectonics, geological structures, hydrothermal deposits, and more.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.3
• /
• pp.162-173
• /
• 1996

Dry magnetic particle inspection(MPI) was performed to detect the surface defects of steel ingot cast billets. Magnetic properties of several materials were characterized by the measurement of the B-H hysteresis curve. The inspection results were evaluated in terms of the magnetizing current, temperature, and the amount of magnetic particles applied to billets. Magnetic flux leakage near the defect site of interest was measured and compared with the results of calculation by the finite element method in the case of direct magnetizing current. Direct and alternating magnetizing currents for materials were deduced by the comparison of the inspections. Results of the magnetic particle inspection by direct magnetizing current were compared with those of finite element method calculations, which were verified by measuring magnetic leakage flux above the surface and the surface defects of the material. For square rods, due to the geometrical effect, the magnetic flux density at the edges along the length of the rods was about 30% of that at the center of rod face for a sufficiently large direct magnetizing current, while it was about 70% for an alternating magnetizing current. Thus, an alternating magnetizing current generates rather uniform magnetic flux density over the rods, except for the region on the face across about 10 mm from the edge. The attraction of the magnetic particle by the magnetic leakage field was nearly independent of the surface temperature of the billets up to $150^{\circ}C$. However, the temperature should have been limited below $60^{\circ}C$ for an effective fixing of gathered magnetic particles to the billet surface using methylene chloride. We also found that the amount of applied magnetic particles tremendously affected the detection capability.