• Investigative Magnetic Resonance Imaging
• /
• v.18 no.4
• /
• pp.332-340
• /
• 2014

Purpose : A relative increase in deoxyhemoglobin levels in hypoperfused tissue can cause prominent hypointense signals in the draining veins (PHSV) within areas of impaired perfusion in susceptibility-weighted imaging (SWI). The purpose of this study is to evaluate the usefulness of SWI in patients with acute cerebral infarction by evaluating PHSV within areas of impaired perfusion and to investigate the usefulness of PHSV in predicting prognosis of cerebral infarction. Materials and Methods: In 18 patients with acute cerebral infarction who underwent brain MRI with diffusion-weighted imaging and SWI and follow-up brain MRI or CT, we reviewed the presence and location of the PHSV within and adjacent to areas of cerebral infarction qualitatively and measured the signal intensity difference ratio of PHSVs to contralateral normal appearing cortical veins quantitatively on SWI. The relationship between the presence of the PHSV and the change in the extent of infarction in follow-up images was analyzed. Results: Of the 18 patients, 10 patients showed progression of the infarction, and 8 patients showed little change on follow- up imaging. On SWI, of the 10 patients with progression 9 patients showed peripheral PHSV and the newly developed infarctions corresponded well to area with peripheral PHSV on initial SWI. Only one patient without peripheral PHSV showed progression of the infarct. The patients with infarction progression revealed significantly higher presence of peripheral PHSV (p=0.0001) and higher mean signal intensity difference ratio (p=0.006) comparing to the patients with little change. Conclusion: SWI can demonstrate a peripheral PHSV as a marker of penumbra and with this finding we can predict the prognosis of acute infarction. The signal intensity difference of PHSV to brain tissue on SWI can be used in predicting prognosis of acute cerebral infarction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.613-620
• /
• 2016

In order to scrutinize the fluid conductivity effects on the electromagnetic flowmeter(EMF) characteristics, a small scale EMF was designed and fabricated. The measuring tube has a $3mm{\times}4mm$ rectangular cross-section, 9 mm length, and a $2mm{\times}3mm$ plate electrode and a ${\Phi}1.5mm$ point electrode. The design parameters, such as the magnetizing frequency and the number of coil turns, and the diameter were optimized. The EMF was tested with a gravimetric calibrator and showed good linearity in the range of 0 to $1.17{\times}10^{-5}m^3/s$. The fluid conductivity was varied between 3 and $11{\mu}S/cm$, and the magnitude of the flow signal was proportional to the fluid conductivity and the wetted area of the electrode. The design information and the test results provide flow measurement techniques for very low flowrate.

• Journal of the Korean Vacuum Society
• /
• v.21 no.5
• /
• pp.258-263
• /
• 2012

Fe-diluted Si alloys grown on p-type Si (100) substrates by pulsed-laser deposition method were studied for structural, electrical, and magnetic properties. The X-ray diffraction patterns for these alloy samples showed a few of peaks with cubic structures such as FeSi, $Fe_3Si$, and $Fe_4Si$. The Fe-composition in alloys are confirmed as Fe atomic percent about 1.25~6.49 % from energy dispersive spectroscopy measurement. The resistivity as a function of the reciprocal temperature was indicated an exponential increase with two activation energies of 5.21 and 7.79 meV. The maximum value of the magnetization at 10 K was about 100 emu/cc, and the ferromagnetism was also observed until 350 K from total magnetization as a function of temperature with applied magnetic field of 3,000 Oe.

• Journal of the Korean Magnetics Society
• /
• v.6 no.4
• /
• pp.235-241
• /
• 1996

Co/Pd and Co/Pt multilayered thin films for perpendicular magnetic recording media were fabricated by sput¬tering method and the effects of the sputtering pressure during the formation of Pd or Pt underlayers on the magnetization behavior and coercivity of the multilayers were investigated. It was found that the coercivity of Co/Pd multilayers was strongly dependent on the sputtering pressure of underlayer and could be enhanced to a large extent merely by increasing the sputtering pressure of underlayer, while in case of Co/Pt films, the degree of coercivity enhancement by controlling the sputtering pressure of underlayer was almost negligible. Coercivity variation of Co/Pd and Co/Pt multilayers with the underlayer material and deposition pressure of underlayer could be well explained in terms of the interface roughness of multilayer films induced by underlayer topology, which could also be correlated to the change of perpendicular anisotropy energy and magnetic reversal feature with the sputtering pressure of underlayer. Kerr rotation angle was hardly affected by the preparation conditions of underlayers.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.1
• /
• pp.13-18
• /
• 2002

The morphorogical characteristics of the Morus tiliaefolia growing wild in the Korean peninsula are as follows. The chromosome number of somatic cell is 2n=84,that is hexaploid. The shape of male inflorescence is a long cylinder shape of 3.6∼6.0 cm. The length of female inflorescence is 1.8 cm, red violet or violet and the weight of mulberry fruits is 1.39∼1.65 g. The winter bud is very big in comparison with the branch and the accessory bud does not exist. The leaf is big and lobed leaf or entire leaf, the density of lenticell is 9.42$\pm$1.29 ㎠. The length of leaf trichome is 236∼438 ㎛ and the distribution density is 16∼37/25 ㎟ and heigh density of leaf back. The trichome shape of the leaf surface is cylinder shaped, in the leaf back it is thin and long corn shaped.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.129-133
• /
• 2001

In this paper, we studied structural and magnetic properties of Ba-ferrite thin film deposited on Si(100) substrate with TiO$_2$ underlayer. Ba-ferrite thin films with TiO$_2$ underlayer were deposited by reactive RF/DC magnetron sputtering system at room temperature. TiO$_2$ underlayer was reactive sputtered with $O_2$. After deposition, the thin films were annealed at vatious temperatures to get the crystallized sample. Underlayer was used to prevent interdiffusion from Ba-ferrite thin film to substrate. The growth of Ba-ferrite thin films was influenced by TiO$_2$ underlayer. Easy magnetization direction is in-plane. From these results the Ba-ferrite film with TiO$_2$ underlayer can be used as longitudinal recording media.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.675-680
• /
• 1995

원자로 압력용기 재료인 SA508-3 강의 인장소성변형에 따른 자기적 성질변화를 연구하였다. 소성변형에 따른 보자력, 잔류자화, 자기이력손실 및 Barkhausen Noise의 변화를 측정하였으며, 변형에 따른 자기적성질의 변화를 자구와 전위와의 상호작용으로 설명하였다. 강자성체의 자기적 성질과 기계적 성질 사이는 밀접한 관련이 있으며, 이를 이용하면 압력용기강의 조사효과 평가에 적용 할 수 있을 것으로 보인다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.68-69
• /
• 2002

Magnetic tunnel junctions은 최근 자기저항용 재료나 MRAM용 소자로 사용하기 위한 연구가 활발하게 진행되고 있다. Magnetic tunnel junction을 저자계, 저전력용 소자로 사용되기 위해서는, 작은 switching field 값과 uniform한 switching field 분포를 가져야 한다. Micromagnetic simulation을 통하여 free layer의 두께와 포화 자화 값이 감소함에 따라서 switching field가 감소함을 알 수 있었다. 본 연구에서는 얇은 free layer를 사용하여 magnetic tunnel junction을 제조하고, 얇은 free layer가 자기저항에 미치는 영향에 대하여 알아보았다. (중략)

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.118-119
• /
• 2002

실시간으로 매설된 송유관이나 가스관의 내부에 누설자속 (Magnetic Flux Leakage: MFL) 탐지용 피그를 통과시킴으로서 부식을 모니터한다[1]. NdFeB 자석과 같은 강한 영구자석으로 배관을 자화시키면 부식에 의한 결함 근처에서 자속이 누설되고, 그 MFL은 Hall 프로브나 유도코일에 의해 탐지된다. 자기이방성을 이용하여 응력에 의만 누설자속신호 변화를 계산할 수 있다. MFL 신호를 정밀하게 분석하기 위해서는 측정프로브의 측정속도와 내부압력응력과 같은 운용조건을 고려하여야 한다[2]. (중략)

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1976.04a
• /
• pp.183.1-183
• /
• 1976

우리나라에서 쉽게 얻을 수 있는 각종 섬유소 폐기물을 유일한 탄소원으로 하여 전보에서 분리 동정한 섬유소 자화 세균 Cellulomonas flavigena KIST 321을 배양하여 균단백의 생산에 대하여 살펴본 결과는 다음과 같다. 1) 당류를 탄소원으로 했을 때 cellulose꼭 xylose에서 균체생성량이 제일 많았다.(중략)