• Title/Summary/Keyword: 자유 동요

Search Result 389, Processing Time 0.037 seconds

Transformation of Dynamic Loads into Equivalent Static Loads by the Selection Scheme of Primary Degrees of Freedom (주자유도 선정 기법에 의한 동하중의 등가 정하중으로의 변환)

  • Kim, Hyun-Gi;Cho, Maeng-Hyo
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.20 no.1
    • /
    • pp.57-63
    • /
    • 2007
  • The systematic method to construct equivalent static load from a given dynamic load is proposed in the present study. Previously reported works to construct equivalent static load were based on ad hoc methods. Due to improper selection of loading position, they may results in unreliable structural design. The present study proposes the employment of primary degrees of freedom for imposing the equivalent static loads. The degrees of freedom are selected by two-level condensation scheme with reliability and efficiency. In several numerical examples, the efficiency and reliability of the proposed scheme is verified by comparison displacement for equivalent static loading and dynamic loading at the critical time.

A Study on New Mathematical Model of Ship Manoeuvring Motion Taking Coupling Effect of Roll into Consideration (횡동요를 고려한 선박조종운동의 새로운 수학모델에 관한 연구)

  • Sohn, Kyoung-ho;Kim, Yong-min
    • Journal of Navigation and Port Research
    • /
    • v.27 no.5
    • /
    • pp.451-458
    • /
    • 2003
  • A ship with small metacentric height or high speed vessel performs relatively large roll angles in her manoeuvring motion. Roll coupling effect should be taken into consideration for accurate prediction of manoeuvring motion of such a ship. This paper proposes a new mathematical model of ship manoeuvring motion taking coupling effect of roll into consideration. Some kinds of manoeuvring motion are simulated by computer, based upon the proposed model. The simualted results by proposed model here are compared with those by existing model. The proposed model is found to be practical and useful for prediction of manoeuvring motion with roll effect.

분자동역학 모의실험을 이용한 Lennard-Jones 이성분 혼합물의 섞임 자유에너지 및 섞임 엔트로피 계산

  • Lee, A-Yeong;Jeong, Yu-Jin
    • Proceeding of EDISON Challenge
    • /
    • 2014.03a
    • /
    • pp.311-323
    • /
    • 2014
  • 분자동역학 모의실험을 이용하여 간단한 van der Waals 상호작용하는 이성분 혼합물 계의 섞임 자유에너지 및 섞임 엔트로피 등 섞임과 관련된 열역학 함수들을 계산하는 방법을 소개한다. 각 혼합물의 과잉 자유에너지는 열역학 적분 (thermodynamic integration)방법을 이용하여 계산하고, 이성분 혼합물의 섞임 관련 열역학 함수들은 Hess의 법칙을 확장함으로써 구한다. 계산 결과로부터 온도가 증가할수록 계의 섞임 Helmholtz 자유에너지는 감소하며, 섞임 내부에너지도 감소함을 알 수 있다. 섞임 엔트로피는 온도가 증가할수록 이상기체의 섞임 엔트로피에 접근함을 알 수 있다. 섞임 Helmholtz 자유에너지에 대한 섞임 내부에너지와 섞임 엔트로피 기여도를 조사한 결과 이 계의 섞임 과정을 주도하는 추진력은 엔트로피에 의한 것임을 알 수 있다. 본 연구 방법과 결과를 이용함으로써 학부생들이 혼합물의 열역학 성질을 이해하는데 도움을 주리라 기대한다.

  • PDF

공업단지 및 수출자유지역내의 공장등 건축에 관한 규칙

  • Korea Institute of Registered Architects
    • Korean Architects
    • /
    • no.10 s.81
    • /
    • pp.68-68
    • /
    • 1975
  • 공업단지내의 공장등 건축에 관한 시행요령이 75년 7월23일자로 폐지됨과 동시에 동일자로 동요령에 대치되는 공업단지 및 수출자유지역내의 공장등 건축에 관한 규칙이 상공부령 제446호로 제정 시행중에 있으므로 동 규칙을 게제하오니 회원의 업무에 차질이 없도록 하시기 바랍니다.

  • PDF

Development of Free Running Model Ship for Evaluation of the Performance of Anti-Rolling Devices (자세제어장비 성능시험을 위한 자유항주 모형선 개발)

  • Yoon Hyeon-Kyu;Lee Gyeong-Joong;Son Nam-Sun;Yang Young-Hoon
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2004.11a
    • /
    • pp.33-39
    • /
    • 2004
  • A ship runs with various modes of motion due to waves. Among the modes, roll mainly influences on the safety of cargos and crew's fatigue. Therefore a ship equipped with anti-rolling devices are on an increasing trend. In this research, we developed a free running model ship to evaluate the performances of fin stabilizer and moving weight stabilizer. Also those performance tests were carried out through the proposed test procedure.

  • PDF

새로운 형태의 3자유도 마이크로 매니플레이터

  • 정구봉;이병주;서일홍;김희국
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2000.10a
    • /
    • pp.411-411
    • /
    • 2000
  • 본 논문에서는 새로운 형태의 정밀위치제어용 3자유도 매니플레이터를 제안하고, 기구학 해석을 수행하며, FEM과 수치해석적인 방법을 비교하여 메카니즘에 대한 모델링 방법이 크게 틀리지 않음을 확인 하고자 한다. 회전관절과 구형관절은 비구동관절로써 미소움직임이 가능하도록 하나의 모듈로 이루어진 flexure hinge들로 만들어진다. 따라서, 비구동관절에 대한 강성해석을 수행하며 구동관절의 토오크 벡터를 비구동관절의 강성과 변위로 표현하여 액추에이터의 구동용량을 결정한다.

  • PDF

Transformation of Dynamic Loads into Equivalent Static Load based on the Stress Constraint Conditions (응력 구속조건을 고려한 동하중의 등가정하중으로의 변환)

  • Kim, Hyun-Gi;Kim, Euiyoung;Cho, Maenghyo
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.26 no.2
    • /
    • pp.165-171
    • /
    • 2013
  • Due to the difficulty in considering dynamic load in the view point of a computer resource and computing time, it is common that external load is assumed as ideal static loads. However, structural analysis under static load cannot guarantee the safety of design of the structures under dynamic loadings. Recently, the systematic method to construct equivalent static load from the given dynamic load has been proposed. Previous study has calculated equivalent static load through the optimization procedure under displacement constraints. However, previously reported works to distribute equivalent static load were based on ad-hoc methods. Improper selection of equivalent static loading positions may results in unreliable prediction of structural design. The present study proposes the selection method of the proper locations of equivalent static loads to dynamically applied loads when we consider transient dynamic structural problems. Moreover, it is appropriate to take into account the stress constraint as well as displacement constraint condition for the safety design. But the previously reported studies of equivalent static load design methods considered only displacement constraint conditions but not stress constraint conditions. In the present study we consider not only displacement constraint but also stress constraint conditions. Through a few numerical examples, the efficiency and reliability of proposed scheme is verified by comparison of the equivalent stress between equivalent static loading and dynamic loading.

Free Vibration Analysis of Arbitrarily Shaped Plates with Free Edges Using Non-dimensional Dynamic Influence Functions (무차원 동영향 함수를 이용한 자유단 경계를 가진 임의 형상 평판의 자유진동해석)

  • 강상욱;김일순;이장무
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.13 no.10
    • /
    • pp.821-827
    • /
    • 2003
  • The so-called boundary node method (or NDIF method) that was developed by the authors has been extended for free vibration analysis of arbitrarily shaped plates with free edges. Since the proposed method requires no interpolation functions. no integration Procedure is needed on boundary edges of the plates and only a small amount of numerical calculation is involved, compared with FEM and BEM. In order to explain tile reason why spurious eigenvalues are generated when the NDIF method is applied to free plates, the NDIF method has been considered for free vibration analysis of both a fixed string and a free beam. Finally, verification examples show that natural frequencies obtained by the present method agree well with those given by an exact method or a numerical method (ANSYS).

A Numerical Study of Nonlinear Free-surface Flows Generated by Motions of Two Dimensional Cylinders (2차원 실린더의 운동에 기인한 비선형 자유표면 유동의 수치해석)

  • Lee, Ho-Young
    • Journal of Ocean Engineering and Technology
    • /
    • v.12 no.1
    • /
    • pp.85-98
    • /
    • 1998
  • 본 논문의 수치해법은 경계치문제를 풀기 위하여 코시이론(Cauchy's theorem)을 사용하였다. 경계치문제는 완전한 물체표면조건과 자유표면조건을 만족시키는 초기치문제로 귀결된다. 현 수치해법에서 무한영역은 수치계산 영역인 비선형 영역과 선형 자유표면조건을 만족하는 선형영역으로 나누어진다. 선형영역의 해는 과도 그린(Green)함수를 사용하여 정합조건을 부과함으로써, 수치계산은 비선형 영역에서만 수행된다. 본 논문에서 저자는 수치계산 영역에서 코시이론을 사용하여 적분방정식을 도출하였고, 무한영역의 해는 정합면에서 과도 그린함수를 사용하여 표현하였다. 본 수치계산에서 자유표면에 요소 재분배법을 적용함으로써 쇄파현상에 대해서도 안정적인 수치해석을 할 수 있었다. 본 논문에서 개발된 수치방법을 적용한 문제는 다음과 같다. 첫째는 자유표면에서 실린더가 강제동요하는 경우에 자유표면형상과 힘을 계산하여 이전의 실험치 및 계산치와 비교하였다. 두번째로는 실린더가 자유수면하에서 일정한 속도로 항주하는 경우에는 조파저항과 양력을 계산하여 고차 스펙트럴법과 비교하였다.

  • PDF

Time-Domain Simulation of Nonlinear Free-Surface Flows around a Two-Dimensional Hydrofoil (2차원 수중익주위 비선형 자유표면유동의 시간영역 시뮬레이션)

  • Yong-J. Kim
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.31 no.2
    • /
    • pp.45-56
    • /
    • 1994
  • A computationally efficient numerical method based on potential flow is developed for time-domain simulation of the nonlinear free-surface flows around a 2-dimensional hydrofoil. This numerical method, namely, spectral/boundary-element method, is a mixed one of the high-order spectral method and the boundary-element method in time-domain. The high-order spectral method is used to calculate the nonlinear evolution of free-surface, and the boundary-element method is used to calculate the effects of the hydrofoil and the shed vortex. As application examples, nonlinear free-surface flows around a 2-dimensional hydrofoil which starts from the rest and translates near the free-surface with or without harmonic oscillations are calculated. Nonlinear/unsteady results of free-surface waves and hydrodynamic farces are shown and discussed. Particularly, the results of steady-state which are obtained as a special case of the present unsteady solution are compared with others' calculated and experimental results, and good agreements are observed.

  • PDF