• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.6
• /
• pp.731-742
• /
• 2007

This paper presents a new nonlinear analysis algorithm, that is, adaptive Newton-Raphson iteration method, The presented algorithm is based on the existing Newton-Raphson method, and the concept of it can be summarized as calculating the equivalent load for stiffness(ELS) and adapting this to the initial global stiffness matrix which has already been calculated and saved in initial analysis and finally calculating the correction displacements for the nonlinear analysis, The key characteristics of the proposed algorithm is that it calculates the inverse matrix of the global stiffness matrix only once irresponsive of the number of load steps. The efficiency of the proposed algorithm depends on the ratio of the active Dofs - the Dofs which are directly connected to the members of which the element stiffness are changed - to the total Dofs, and based on this ratio by using the proposed algorithm as a complementary method to the existing algorithm the efficiency of the nonlinear analysis can be improved dramatically.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.2 s.119
• /
• pp.185-193
• /
• 2007

This paper deals with the application of the numerical differentiation using the differential quadrature(DQ) in the curved member-like structural analysis. Derivative values of the geometry of structure are definitely needed for analyzing the structural behavior. For verifying the numerical differentiation using DQ, free vibration problems of arch are selected. Terms of curvature composed with the derivatives of arch geometry obtained herein are agreed quite well with exact values obtained explicitly. Natural frequencies subjected to terms of curvature obtained by DQ are agreed quite well with those in the literature. The numerical differentiation using DQ can be practically utilized in the structural analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.189-195
• /
• 2002

This paper deals with the free vibration of horizontally curved beams with transition currie. Based on the dynamic equilibrium equations of a curved beam element subjected to the stress resultants and inertia forces, the governing differential equations are derived for the out-of-plane vibration of curved beam with variable curvature. These equations are applied to the beam having transition curve in which the clothiod curve is chosen in this study. The differential equations are solved by the numerical methods lot calculating the natural frequencies and mode shapes. For verifying theories developed herein, the frequency parameters obtained from this studs and ADINA are compared with each other. As the numerical results, the various parametric studies effecting on natural frequencies are investigated and those results are presented in tables and figures.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.1
• /
• pp.120-130
• /
• 1994

The purpose of this study is to propose the analytical model for the hysteretic behavior of Reinforced Concrete bearn-column joints under various loading history. Discrete line elernents , YVith inelastic rotational spring was adopted to consider the movement of plastic hinging zone influenced by the details of longitudinal reinforcements. Also hysteretic model was constructed by excluding such variables which can not be utilized in dynamic analysis of Reinforced Concrete. structure that it will be adoptable in two-dimensional inelastic frame ardysis with 6-DOF. From the analysis of previous test results, it was found that stiffness deterioration caused by inelastic hysteretic loadings can be predicted by the functron of basic pinching coefficients, ductility ratio.and yield strength ratio of members. Strength degradation coefficients were newly proposed to explain the difference of inelastic behavior of members caused by spacing ratio of transverse steel and sectlon aspect ratio. The energy dissipation capacities calculated using the analytical model proposed in thls paper show a good agreements w~lh test results by an error of 10~20%.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.492-500
• /
• 2018

Purpose: In this paper, based on this background, the main purpose of studying the behavior of concrete slab reinforced with new material fiber in impact loading is investigated by AFRP using aluminum fiber. Results: Research on the use of new materials as reinforcing materials for concrete members has been carried out in many fields such as flexural and shear tests under static loading, fatigue loading under cyclic loading, and application to PC beams. However, And the issue of plate elements is still at a basic stage. Conclusion: In this paper, the dynamic behavior of reinforced concrete slabs is investigated by using AFRP rod reinforced with aluminum fiber.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.72-82
• /
• 1990

A simple numerical analysis procedure has been proposed to trace the response of unstiffened offshore tubular members subjected to lateral impacts and eventually to estimate the consequential extent of damage. In the procedure a tubular member is reduced to a spring-mass system having two degrees-of-freedom. one for local denting deformation and the other for that of overall bending. Results of impact tests have been correlated with those of numerical analysis in order to achieve an empirical representation of the strain-rate sensitivity and other dynamic effects upon the spring coefficient for bending deformation. The theoretical estimates of extents of damage correlate reasonably well with those obtained in experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6673-6678
• /
• 2015

Recently, the free form buildings are constructed frequently. Exterior and interior components of these buildings have the free cross-section and a curved shape. So, There are many usages of classical finite element having tapered section and free-style shape. Some general commercial applications like ETABS, SAP2000, MIDAS are usually used for the safety evaluation of the free form structures. However, there are some limits in the accuracy of structural analysis and the length of analysis time because a very complicated finite element mesh have to be used. Therefore, In this study, a pre and post program module was developed to take advantage of general 3-D curved beam element which has a free-style curved shape and mathematical backgrounds. Pre-post processing module has been developed in this study was developed to control the curvature of the curved members by the NURBS control points. As a result, fast geometric modeling than was possible commercial applications. In addition, realistic depiction of the shape and behavior patterns were possible because of the free-form building allows visual check of the free form.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.63-71
• /
• 2006

This study presents the effective stiffness-based optimal technique to control Quantitatively lateral drift for shear wall-frame structure system using sensitivity analysis. To this end, the element stiffness matrices are constituted to solve the compatibility problem of displacement degree of freedom between the frame and shear wall. Also, lateral drift constraint to introduce the approximation concept that can preserve the generality of the mathematical programming and can effectively solve the large scaled problems is established. And, the section property relationships for shear wall and frame members are considered in order to reduce the number of design variables and differentiate easily the stiffness matrices. Specifically, constant-shape assumption which is uniformly varying in size during optimal process is applied in frame structure. The thickness or length of shear wall can be changed depending on user's intent. Two types of 20 story shear wall-frame structure system are presented to illustrate the features of the stiffness-based optimal design technique.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.35-42
• /
• 1990

A method for the damage assessment of a structure by an inverse modal perturbation technique is studied. The first few natural frequencies and mode shapes of the damaged structure are assumed to be known. Then, the perturbation equation is formulated for the changes of the modal properties due to the stiffness changes. The stiffness changes due to damages are evaluated, using optimization techniques. Example analyses are carried out for several cases of stick models and a truss model. Results indicate that the present method yields very reasonable estimates for the element stiffness changes.

• Proceedings of the ESK Conference
• /
• 1996.10a
• /
• pp.85-90
• /
• 1996

현재 초,중,고등학교에서 사용하고 있는 책상과 의자는 학생들의 신장 등급에 따라 13호로 제작되 고 있음에도 불구하고, 신체부적합에 의한 편이도. 안전도에 문제를 안고 있다. 이러한 책상과 의자는 특히 장시간 앉아 있는 성장기 청소년의 신체 발달을 고려하지 않음으로 인해 그 개선책이 시급하다 하겠다. 다라서 본 연구에서는 설문조사를 통하여 초,중,고등하교 학생들의 감성적 선호도를 조사하 고, 1992년 표준과학연구소의 부위별 신체 측정 자료를 토대로, 자유 조절형의 인체공학적 책상과 의자 를 설계하였다. 이 인체공학적 설계는 한 호수의 제품으로 색상 4단계, 의자 3단계(조합 12 단계)조절 을 가능하게 했으며, 기존의 교구에서 발생하던 신체 부위 상해, 잘못된 자세로 인한 피로, 디자인적 고 려 부재의 문제들을 종합적으로 보완하였다. 이 인체공학적 책상과 의자는 표본 집단에서 그 편이도, 안전도, 개인적 선호도를 조사하여, 기존의 교구와 유의한 차이를 보였다. 중 저가로 제작 가능한 본 인 체공학적 책상과 의자는 실제초,중,고등학교에서사용 가능한 제품으로 사료되나, 본격적인 판매에 앞서 완제품에 대한 시장 평가가 요구된다.