• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.35-35
• /
• 2017

유역 물순환 개선 기술은 기후변화 및 토지이용변화가 진행 중에 있거나 예상되는 지역에 대하여 강우-유출수를 지연, 저류, 침투시켜 지속가능한 물순환체계를 유지?회복하도록 하는 기술이라 할 수 있다. 기후변화 및 토지이용변화에 따른 영향을 평가하고, 지속가능한 유역 물순환체계를 구축하여 적응 전략을 체계적으로 수립하기 위해서는 물순환 개선 기술의 정립 및 개발이 필수적이다. 그러나 현재 유역 물순환 개선기술은 일부 시가화 지역에 국한되어 있어 유역 규모의 개선 전략을 수립하는데 한계가 있다. 또한, 물순환계의 변화량을 평가하기 위한 모형화 기법 역시 해외에서 개발된 기술을 여과 없이 도입하여 국내의 환경을 충분히 반영하기는 어렵다. 개발된 유역 물순환 개선 및 평가시스템은 기존 국가연구개발사업을 통해 개발되고 사업화에 성공한 바 있는 유역 물순환 평가 모형인 CAT(Catchment hydrologic cycle Assessment Tool)을 수정 및 개선하여 기후변화에 따른 영향을 평가하고 적응 대책을 수립하기 위한 실무적인 소프트웨어이다. 침투트렌치, 식생침투트렌치, 습지, 저류지, 빗물탱크 등의 물순환개선시설에 대한 효과를 평가할 수 있도록 개별시설의 제원에 따른 물순환개선 효과를 정량적으로 평가하여 제시한다. 기후변화에 따른 장기간의 유역 물순환을 평가하기 위해서는 물리적 매개변수 기반의 수문해석 보다는 단순환된 개념적 매개변수 기반의 집중형 장기유출 해석이 필요할 수 있다. 따라서 국내외에서 많이 사용되고 있는 장기 일유출 모형(GR4J, GSM, HBV, SYMHYD, TANK, TPHM 등)을 유역 물순환 개선 평가 플랫폼에 탑재함으로써 소유역의 특성을 반영한 기후변화 적응 일유출 해석이 가능하도록 하였으며, 각 모형들의 매개변수는 수동보정 외에도 SCE-UA를 이용한 자동보정이 가능하도록 시스템으로 구축하였다. 개발된 유역물순환 개선 및 평가시스템은 실무적 차원에서 기후변화에 따른 유역 물순환 개선 기술을 적용하고 평가하는데 있어서 매개변수 입력자료 구축에 따른 자원 소요 시간 및 시스템 개발 비용을 획기적으로 단축시켰으며 국외 의존도가 높은 수문 해석모형을 국내 기술로 개발함으로써 기술자립도를 높이고 국내 및 해외의 유역의 성공적인 적용을 통하여 성능을 입증하였다. 기후변화에 따른 수자원의 재평가, 개선시설의 정량적 평가 및 하천유역의 수자원관리 실무에 적용성이 높을 것으로 기대된다.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.1
• /
• pp.63-73
• /
• 2016

How effectively a wind farm captures high market prices can greatly influence a wind farm's viability. This research identifies and creates an understanding of the effects that result in various capture prices (average revenue earned per unit of generation) that can be seen among different wind farms, in the current and future competitive SMP (System Marginal Price) market in South Korea. Through the use of a neural network to simulate changes in SMP caused by increased renewables, based on the Korea Institute of Energy Research's extensive wind resource database for South Korea, the variances in current and future capture prices are modelled and analyzed for both onshore and offshore wind power generation. Simulation results shows a spread in capture price of 5.5% for the year 2035 that depends on both a locations wind characteristics and the generations' correlation with other wind power generation. Wind characteristics include the generations' correlation with SMP price, diurnal profile shape, and capacity factor. The wind revenue cannibalization effect reduces the capture price obtained by wind power generation that is located close to a substantial amount of other wind power generation. In onshore locations wind characteristics can differ significantly/ Hence it is recommended that possible wind development sites have suitable diurnal profiles that effectively capture high SMP prices. Also, as increasing wind power capacity becomes installed in South Korea, it is recommended that wind power generation be located in regions far from the expected wind power generation 'hotspots' in the future. Hence, a suitable site along the east mountain ridges of South Korea is predicted to be extremely effective in attaining high SMP capture prices. Attention to these factors will increase the revenues obtained by wind power generation in a competitive electricity market.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.599-615
• /
• 2022

In order to excavate underground tunnel most safely such as Han river, the slurry shield TBM method is applied to cope with face of high water pressure for many metro projects. In downtown subway project most of excavated soil is discharged externally whereas in road construction excavated soil is used as filling materials so it becomes important factor for success of the project. After excavated soil, weathered rock and soft rock are discharged with bentonite through discharge pipe to slurry treatment plant then those soils are separated in separation plant according to those size. Fine grained soil has been discarded together with filter cake but it is not toxic and can be mixed with coarse aggregate in proper ratio so this study is performed to find use of qualified filling material to meet quality standard. Therefore, in this study, legal standards and quality standards for the utilization of excavated soil of the slurry shield TBM method were examined and test was conducted to derive recycling way for filter cake and aggregate. And a plan for using it as a filling material for road construction was derived. Because bentonite is a clay composed of montmorillonite, and the excavated soil in the tunnel is also non-toxic, disposal of this material can waste social cost so it is expected to be helpful in the underground space development project that carries out the TBM project by recycling it as a valuable resource.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.67-73
• /
• 2019

In this study, to optimize the production and utilization of biogas for organic waste resources, the precision monitoring of on-site facilities and the energy balance by facility were analyzed, and the solutions for field problems were investigated, and the design and operation guidelines for pretreatment facilities and generators were presented. Gas pre-treatment is required to solve frequent failures and efficiency degradation in operation of high quality refining facilities, and processing processes such as desulfurization, dehumidification, deoxidization, dust treatment, volatile organic compounds, etc. Since these processes are substances that are also eliminated from the high-quality process, quantitative guidelines are not presented in the gas pretreatment process, but are suggested to operate during the processing process as a qualitative guideline. In particular, dust, siloxane, and volatile organic compounds are the main cause of frequent failure of high-quality processes if they are not removed from the gas pretreatment process. Design of the biogas high-quality process. The operation guidelines provide quality standards [Methane content (including propane) of 95% or more] with 90% or more utilization of the total gas generation, two systems, and a margin of 10% or more. It also proposed installing gas equalization tank, installing thermal automatic control system for controlling equalization of auxiliary fuel, installing dehumidification device at the back of high quality for removing moisture generated in the process of gas compression, installing heat-resisting facilities to prevent freezing of facilities in winter and reducing efficiency, and installing membrane facilities in particular.

• International Area Studies Review
• /
• v.22 no.4
• /
• pp.145-166
• /
• 2018

This study is due to global competition, the wall between regions is disappearing, customer needs are diversified, and market and technology are rapidly changing. Future growth engines, the importance of convergence capabilities for industrial competitiveness is being emphasized more. Therefore, companies should seek innovative means to increase the efficiency of the company by establishing optimized global management environment and establishing direction and strategy for utilization of convergence technology by improving industrial competitiveness. Firms must adopt and utilize related new technologies by strengthening their convergence capabilities through dynamic capabilities that are internal resource bases for new product development and process innovation. Globalize markets and technologies can expect higher innovation performance when aligning strategic direction with formalized technology competencies held by the firm and incorporating the convergence capabilities needed for technological innovation into processes. The study focuses on the effects of market and technology orientation on technological innovation performance, whether dynamic and convergence capabilities affect technological innovation performance, and dynamic and convergence capabilities to mediate between market and technology orientation. For the study, we surveyed 51.4% of global and multinational corporations that are internationally active or headquartered overseas. Based on the previous studies, hypotheses were established and the collected data were analyzed through utilization path analysis and Sobel test.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.193-203
• /
• 2021

As endangered species are gradually increasing due to land development by humans, it is essential to secure sufficient protected areas (PAs) proactively. Therefore, this study checked priority conservation areas to select candidate PAs when considering the impact of land development. We determined the conservation priorities by analyzing four scenarios based on existing conservation areas and reflecting the development impact using MARXAN, the decision-making support software for the conservation plan. The development impact was derived using the developed area ratio, population density, road network system, and traffic volume. The conservation areas of endangered species were derived using the data of the appearance points of birds, mammals, and herptiles from the 3rd National Ecosystem Survey. These two factors were used as input data to map conservation priority areas with the machine learning-based optimization methodology. The result identified many non-PAs areas that were expected to play an important role conserving endangered species. When considering the land development impact, it was found that the areas with priority for conservation were fragmented. Even when both the development impact and existing PAs were considered, the priority was higher in areas from the current PAs because many road developments had already been completed around the current PAs. Therefore, it is necessary to consider areas other than the current PAs to protect endangered species and seek alternative measures to fragmented conservation priority areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.613-622
• /
• 2020

The South Korean government plans for a 37 % reduction in CO2 emissions against business as usual by 2030. Subsequently, the Ministry of Land, Infrastructure and Transport declared a 26.9 % reduction target in greenhouse gas emissions from buildings by 2020 and established the Green Standard for Energy and Environmental Design (G-SEED) to help improve the environmental performance of buildings. Construction companies often work with consulting firms to prepare for G-SEED certification. In the process, owing to inefficient data sharing and work connections, it is difficult to achieve economic efficiency and obtain certification. The objective of this study was to develop an economic model to assist contractors in achieving the required G-SEED scores for materials and resources. To do this, we automated the process for material comparison and selection on the basis of an analysis of actual consulting data, and developed a model that selects material alternatives that can meet the required scores at a minimum cost. Information on materials is input by applying a genetic algorithm to the optimization of alternatives. When the model was applied to actual data, the construction cost could be lowered by 79.3 % compared with existing methods. The economical material selection model is expected to not only reduce construction costs for owners desiring G-SEED certification but also shorten the project design time.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.184-205
• /
• 2021

Governance is valued as a new concept and principle of social operation and public policy management, and its influence is gradually expanding. Among the various governance theories being put into practice and in case analysis studies, collaborative governance embracing various governance concepts has been found to increase interdependence and responsibility beyond participation and compromise, and create new public values by integrating and utilizing optimal social coordination forms. In the field of cultural assets, governance-related research is also being conducted for the efficiency, sustainability, and scalability of public policy enforcement. This study explored the government's role (promotion, arbitration, and condition creation) in collaborative governance, focusing on the "Cultural Heritage Guardians" to understand how collaborative governance operates in the cultural heritage sector. Regarding governance policies in the cultural asset sector, the cultural asset guardians highlighted the status, role, and characteristics of policies by examining their introduction, development, and implementation. The results of the analysis revealed that private-led, horizontal public-private cooperation, collaborative governance, policy introduction, solidarity, professionalism, resource/knowledge imbalance, cooperation precedence, etc., facilitate increased participation. The government has accordingly proposed measures to establish comprehensive legal stability centered on cooperation; strategic reorganization of dedicated organizations; strengthened, supportive intermediate organizations; and individual and multi-party consultative bodies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.892-903
• /
• 2020

The rapid and accurate prediction of storm-surge height during typhoon attacks is essential in responding to coastal disasters. Most methods used for predicting typhoon data are based on numerical modeling, but numerical modeling takes significant computing resources and time. Recently, various studies on the expeditious production of predictive data based on artificial intelligence have been conducted, and in this study, artificial intelligence-based storm-surge height prediction was performed. Several learning data were needed for artificial intelligence training. Because the number of previous typhoons was limited, many synthesized typhoons were created using the tropical cyclone risk model, and the storm-surge height was also generated using the storm surge model. The comparison of the storm-surge height predicted using artificial intelligence with the actual typhoon, showed that the root-mean-square error was 0.09 ~ 0.30 m, the correlation coefficient was 0.65 ~ 0.94, and the absolute relative error of the maximum height was 1.0 ~ 52.5%. Although errors appeared to be somewhat large at certain typhoons and points, future studies are expected to improve accuracy through learning-data optimization.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.239-247
• /
• 2022

Cities are becoming more complex due to rapid industrialization and population growth in modern times. In particular, urban areas are rapidly changing due to housing site development, reconstruction, and demolition. Thus accurate road information is necessary for various purposes, such as High Definition Map for autonomous car driving. In the case of the Republic of Korea, accurate spatial information can be generated by making a map through the existing map production process. However, targeting a large area is limited due to time and money. Road, one of the map elements, is a hub and essential means of transportation that provides many different resources for human civilization. Therefore, it is essential to update road information accurately and quickly. This study uses Semantic Segmentation algorithms Such as LinkNet, D-LinkNet, and NL-LinkNet to extract roads from drone images and then apply hyperparameter optimization to models with the highest performance. As a result, the LinkNet model using pre-trained ResNet-34 as the encoder achieved 85.125 mIoU. Subsequent studies should focus on comparing the results of this study with those of studies using state-of-the-art object detection algorithms or semi-supervised learning-based Semantic Segmentation techniques. The results of this study can be applied to improve the speed of the existing map update process.