• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.3
• /
• pp.104-109
• /
• 1981

The experiment was designed to measure splash erosion and to investigate the relationships between soil detachment, kinetic energy and C factor at various soils and crops under the natural rainfall, using the modified Ellison cup. The results obtained were as follows: 1. Splash erosion increased as the texture was coarser, reaching a maximum amount in loamy sand of 12.6ton/10a/year, 9.7ton for loam, 9.0ton for sandy loam, and 7.0ton for clay loam. 2. Splash erosion positively related to kinetic energy ($EI_{30}$) but negatively to K value. 3. A considerable relationship between splash erosion and kinetic energy was observed under coverage less than 50%; however, it decreased with increasing canopy resulting in no relation over 90% coverage. The amount of soil detachment by natural rainfall ranged from 10 to 15ton/10a at various cropping systems. 4. The particle size distribution of splashed soil was similar to that of original one and fine sand($250-100{\mu}$) marked the highest detachment and splash.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.223-233
• /
• 2010

The effects of extracellular polymeric substances (EPS) of Pseudomonas aeruginosa on adsorption and redox state alteration of dissolved As, Cr and U were investigated through batch experiments. Surfaces of bacterial cells were either vigorously washed or unwashed. Solutions of As(V), Cr(VI) and U(VI) were inoculated with the bacterial cells under no nutrient condition, and total aqueous concentrations and redox state alteration were monitored over time. No As adsorption occurred onto bacteria or EPS; however, unwashed bacteria reduced about 60% As(V) to As(III). Unwashed bacteria also led to removal of 45% total dissolved Cr and reduction of 64% Cr(VI). About 80% U(VI) was removed from solution with unwashed bacteria as well. Such electrochemical reduction of the elements was likely due to reducing capacity of EPS itself or detoxifying reduction of the bacteria which kept their viability under protection of EPS. The results indicated that bacterial biofilm may significantly control the redox state and subsequent mobility of As, Cr and U in natural geologic settings.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.48-60
• /
• 2011

Nowadays, the 3D community is actively researching on 3D imaging and free-viewpoint video (FVV). The free-viewpoint rendering in multi-view video, virtually move through the scenes in order to create different viewpoints, has become a popular topic in 3D research that can lead to various applications. However, there are restrictions of cost-effectiveness and occupying large bandwidth in video transmission. An alternative to solve this problem is to generate virtual views using a single texture image and a corresponding depth image. A critical issue on generating virtual views is that the regions occluded by the foreground (FG) objects in the original views may become visible in the synthesized views. Filling this disocclusions (holes) in a visually plausible manner determines the quality of synthesis results. In this paper, a new approach for handling disocclusions using depth based inpainting algorithm in synthesized views is presented. Patch based non-parametric texture synthesis which shows excellent performance has two critical elements: determining where to fill first and determining what patch to be copied. In this work, a noise-robust filling priority using the structure tensor of Hessian matrix is proposed. Moreover, a patch matching algorithm excluding foreground region using depth map and considering epipolar line is proposed. Superiority of the proposed method over the existing methods is proved by comparing the experimental results.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.76-84
• /
• 2017

Recently, the 'Ecological Network Restoration Project at Chupungnyeong' has been placed; this project is located at the center of the Baekdu mountain spine, the core of the ecological network of the Korean Peninsula. In the process of industrialization since the early 1900s, this area has been under railroad and road construction; as such, wildlife movements have been interrupted and many cases of road-kill have been found. The investment in railroads has increased because railroads are an environmentally sound means of transportation. Single track railways have been converted to double track electric railways and track reforming projects are underway in order to speed up the current railway system. This study suggests to take land use as a standard for assessing the ecological weaknesses of the domestic geo-spaces that are to be affected by rapid extension of railway lines. The land cover map issued by the Ministry of Environment was overlapped with the Korean Railway Line Map for analysis. The results showed that five items were high in sensitivity: paddy fields, fields, deciduous forests, bare land, and inland waters. It seems to be necessary to set weights for highly sensitive land use types; also, specific evaluation criteria need to be reestablished.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.641-646
• /
• 2016

Soil organic matter (SOM) is an important soil component releasing nutrients to the plants and reducing risks of soil contamination to the human and ecosystem. Much attention has been recently paid to SOM investigation and management because SOM holds the most of carbon in the earth and sequestrate carbon as a sink tank. The first objective of the study was to investigate SOM of 495 soil samples taken at the Korea Soil Quality Monitoring Network. Soil samples were collected from 16 regions and 8 land use types. The second objective of the study was to find a relationship between the Tyurin method and loss-on-ignition (LOI) method for SOM. The means of SOM by Tyurin and LOI methods were 1.90 and 2.92 % (w/w), respectively. Land uses such as forest, religious area and park where organic matters continuously supply to normally showed higher SOMs than residential and school areas having sandy soils. A regression equation of the relationship between Tyurin and LOI methods was y(Tyurin) = 0.6257x(LOI) + 0.0602 (P-value < 0.001). The coefficient of determination was $R^2=0.749$, relatively linearly related. Although LOI may result in higher SOMs than the Tyurin method, LOI may be a preference for the SOM investigation if various kinds of land uses and many soil samples should be measured.

• Journal of Wetlands Research
• /
• v.22 no.1
• /
• pp.31-38
• /
• 2020

Weirs are to secure amount water of streams and drop structures are to enhance stabilization of stream bed and bridges are to connect isolated region, which are called stream crossing structures. In the stream design criteria, directions for minimum size of structures are suggested to secure stability of stream crossing structures. However the sizes of almost all existing weirs and drop structures are not satisfied with the stream design criteria and only 22 percent of the peirs of bridges are satisfied. To enhance hydraulic stability of existing weirs and drop structures, it is required that the ratio of bed protection to apron should be above 3.3. According to factual survey of structures in the sample streams, it has been shown that the longitudinal slope of rapid works with 1:20 is the most reasonable to design velocity if existing weirs and drop structures are rehabilitated into rapid works. It has been known that violating freeboard and span length of piers should make existing bridges reconstructed or removed. However, comprehensive review including deterioration level of bridges, special regulation for span length, etc. should be considered to determine rehabilitation plan of bridges. In this study, a procedure has been suggested to improve hydraulic stability of weirs, drop structures and piers of bridges. Sound environment of stream and reduction of natural disaster could be achieved by improving stability of cross structures, which could be obtained by governmental budget and active stream management including observance of design criteria.

• Development and Reproduction
• /
• v.12 no.2
• /
• pp.125-132
• /
• 2008

Melatonin (N-acetyl-5-methoxytryptamine), a major hormone of pineal gland in vertebrates, is known to be associated with regulation of the dynamic physiological functions in general and has some functions on reproduction in the ovarian follicles in particular. And its antioxidant properties as a scavenger are also reported. The aim of this study was to investigate the effect of melatonin on the in vitro maturation of mouse germinal vesicle (GV)-stage oocytes. Oocyte maturation, apoptosis, and mRNA expression of melatonin receptor were analyzed in the cumulus cell-enclosed oocytes (CEOs) cultured with melatonin for 18 h. The CEOs were obtained from 3 wk-old ICR female mice cultured in media with 0, 0.1 nM, 10 nM, or 1,000 nM melatonin for 18 h. And then the extrusion of the first polar body was assessed to evaluate the maturation rate. The apoptosis and mRNA expression of melatonin receptor (Mtnr1-a and Mtnr1-b) in cumulus cells of each group were measured by TUNEL assay, ELISA, and real time RT-PCR after in vitro maturation(IVM). The addition of melatonin in the IVM medium significantly improved nuclear maturation of the mouse GV oocytes and the highest maturation rate were obtained from the group treated with 1,000 nM melatonin. Apoptosis was not detected in IVM oocytes, but detected in cumulus cells. And cumulus cells treated with 1,000 nM melatonin exhibited significantly lower apoptosis. In the group treated with 1,000 nM melatonin, the expression of melatonin receptor mRNA was decreased in CEOs. In conclusion, melatonin has a potentially important role for regulating oocyte maturation and reduces the apoptosis of cumulus cells in vitro.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.979-991
• /
• 2004

In this study, RMA2 and RMA4, the 2-D depth-averaged models, were employed to simulate the two-dimensional mixing characteristics of the pollutants in the natural streams. The velocity and depth were first calculated using RMA2, 2-D hydrodynamic model, and then the resulting flow field was inputted to RMA4, 2-D water quality model, to compute the concentration field. RMA models were verified using the velocity and concentration data measured in S-curved meandering channel. The results showed that the RMA2 model simulated well the phenomenon that the maximum velocity line is located at the Inner bank of meandering channel, and the RMA4 model was well adapted to reproduce the general mixing behavior and the separation of tracer clouds. Comparing model simulations with measured data in the field experiments, RMA2 model simulated well general flow field and tendency that the maximum velocity line skewed toward the outer bank which were found in field experiments. The simulations of RMA4 model showed that the center of the tracer cloud tends to follow the path in which the maximum velocity occurs. In this study, the dispersion coefficients are fine-tuned based on the measured coefficients calculated using field concentration data, and the results show reasonable agreement with predictive equations.

• Journal of The Korean Association For Science Education
• /
• v.34 no.5
• /
• pp.479-490
• /
• 2014

The purpose of this study is to develop an argument-based modeling strategy, utilizing writing and argumentation for communication in science education. We need to support students and teachers who have difficulty in modeling in science education, this strategy focuses on development of four kinds of factors as follows: First, awareness of problems, recognizing in association with problems by observing several problematic situations. Second is science concept structuralization suggesting enough science concepts by organization for scientific explanation. The third is claim-evidence appropriateness that suggests appropriate representation as evidence for assertions. Last, the use of various representations and multimodal representations that converts and integrates these representations in evidence suggestion. For the development of these four factors, this study organized three stages. 'Recognition process' for understanding of multimodal representations, and 'Interpretation process' for understanding of activity according to multimodal representations, 'Application process' for understanding of modeling through argumentation. This application process has been done with eight stages of 'Asking questions or problems - Planning experiment - Investigation through observation on experiment - Analyzing and interpreting data - Constructing pre-model - Presenting model - Expressing model using multimodal representations - Evaluating model - Revising model'. After this application process, students could have opportunity to form scientific knowledge by making their own model as scientific explanation system for the phenomenon of the natural world they observed during a series of courses of modeling.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1857-1863
• /
• 2013

Bulgogi sauces containing electron beam-irradiated garlic powder (1%, 3%, and 5%) were used to compare their irradiation status before and after pasteurization ($85^{\circ}C$, 30 min), using a thermoluminescence (TL) analysis by two different laboratories. The sauces with non-irradiated ingredient only provided a background TL glow curve with a maximum peak after $300^{\circ}C$. However, the presence of irradiated ingredient (1 and 10 kGy) was evident through the typical TL glow curves in a temperature range of 150 to $250^{\circ}C$. The concentration of irradiated ingredients showed a greater impact on identification characteristics than their radiation doses. TL ratios ($TL_1/TL_2$) were not able to confirm the results showing evidence of irradiation through the TL glow curve shapes. Pasteurization showed a negligible effect on the key identification parameters and did not change the shape or temperature range of radiation-specific TL glow peak, but reduced TL glow curve intensity. TL glow curve shape with the maximum peak in a temperature range of $150{\sim}250^{\circ}C$ was the most useful characteristic providing information required for confirming the irradiation status.