• 기계와재료
• /
• v.20 no.4
• /
• pp.48-56
• /
• 2009

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.15-26
• /
• 2017

Cobalt ferrocyanide (CoFC) or nickel ferrocyanide (NiFC) magnetic nanoparticles (MNPs) were fabricated for efficient removal of radioactive cesium, followed by rapid magnetic separation of the absorbent from contaminated water. The $Fe_3O_4$ nanoparticles, synthesized using a co-precipitation method, were coated with succinic acid (SA) to immobilize the Co or Ni ions through metal coordination to carboxyl groups in the SA. CoFC or NiFC was subsequently formed on the surfaces of the MNPs as Co or Ni ions coordinated with the hexacyanoferrate ions. The CoFC-MNPs and NiFC-MNPs possess good saturation magnetization values ($43.2emu{\cdot}g^{-1}$ for the CoFC-MNPs, and $47.7emu{\cdot}g^{-1}$ for the NiFC-MNPs). The fabricated CoFC-MNPs and NiFC-MNPs were characterized by XRD, FT-IR, TEM, and DLS. The adsorption capability of the CoFC-MNPs and NiFC-MNPs in removing cesium ions from water was also investigated. Batch experiments revealed that the maximum adsorption capacity values were $15.63mg{\cdot}g^{-1}$ (CoFC-MNPs) and $12.11mg{\cdot}g^{-1}$ (NiFC-MNPs). Langmuir/Freundlich adsorption isotherm equations were used to fit the experimental data and evaluate the adsorption process. The CoFC-MNPs and NiFC-MNPs exhibited a removal efficiency exceeding 99.09% for radioactive cesium from $^{137}Cs$ solution ($18-21Bq{\cdot}g^{-1}$). The adsorbent selectively adsorbed $^{137}Cs$, even in the presence of competing cations.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.151-152
• /
• 2013

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.12a
• /
• pp.122-122
• /
• 2011

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.12a
• /
• pp.121-121
• /
• 2011

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.9-9
• /
• 2003

최근에 Fe-CU, Fe-Si 등과 같이 자성금속과 비자성금속화합물에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 기계적 합금법으로 제작한 Co/sub 5/C/sub 95/ 나노미립상 합금의 구조와 자기적 성질을 조사하였다. 그림(1)은 EXAFS 스펙트럼의 푸리에변환이다. 이로부터 합금화시간에 따라 Co-Co 결합은 점차적으로 작아지며 Co-C 결합이 진행됨에 알수 있다. 그림(2)은 합금화시간에 따른 포화자화값과 보자력의 크기이다. 포화자화는 합금화 시간에 따라 연속적으로 작아졌으며 보자력은 커지다가 작아지는 경향을 보였다. 포화자화가 작아지는 것은 Co-C 결합이 생기면서 Co의 쌍을 이루지 않은 전자가 C의 전자와 쌍을 이루면서 상쇄되기 때문인 것으로 보인다. 보자력의 거동은 Co 미립자가 다자구영역으로부터 단자구영역으로 전환되기 때문인 것으로 해석될수 있다. Co 미립자는 C의 캡슐형에 싸여있으며 60시간과 100시간에서 Co 미립자의 크기는 X-ray 회절선의 넓어짐으로부터 Scherrerr 공식을 이용하여 계산한 결과 18nm 와 15nm 정도가 됨을 알 수 있었다. 연구를 통하여 Co/sub 5/C/sub 95/ 나노미립상합금을 기계적합금법으로 만들 수 있음을 알 수 있었다. 이론적인 계산에 의하면 초상자성 Co 입자의 크기는 8.2nm 정도가 되었으며 본 실험에서 최종 입자의 크기는 15nm까지 작아졌다.

• Journal of the Korean Magnetics Society
• /
• v.19 no.2
• /
• pp.57-61
• /
• 2009

$MnFe_2O_4$ nanoparticles have been prepared by a sol-gel method. The structural and magnetic properties have been investigated by XRD, SEM, and $M{\ddot{o}}ssbauer$ spectroscopy, VSM. $MnFe_2O_4$ powder that was annealed at $250^{\circ}C$ has spinel structure and behaved superparamagnetically at room temperature. $MnFe_2O_4$ annealed at 400 and $500^{\circ}C$ has a typical spinel structure and is ferrimagnetic in nature. The estimated size of superparammagnetic $MnFe_2O_4$ nanoparticle is around 17 nm. The hyperfine fields of the A and B patterns at 4.2 K were found to be 508 and 475 kOe, respectively. The blocking temperature ($T_B$) of superparammagnetic $MnFe_2O_4$ nanoparticle is about 120 K. The magnetic anisotropy constant and relaxation time constant of $MnFe_2O_4$ nanoparticle were calculated to be $4.9{\times}10^5erg/cm^3$.

• Journal of the Korean Magnetics Society
• /
• v.18 no.2
• /
• pp.63-66
• /
• 2008

In order to the magnetization and magnetic entropy change for superparamagnetic ferrite nanoparticles, ultrafine cobalt ferrite particles were synthesized using a mircoemulsion method. The peak of X-ray diffraction pattern corresponds to a cubic spinel structure with the lattice constant 8.40 $\AA$. The average particle size, determined from X-ray diffraction line-broadening using Scherrer's, is 7.9 nm. The maximal magnetizations measured at 5 and 300 K are 24.3 emu/g and 17.2 emu/g, respectively. Superparamagnetic behavior of the sample is confirmed by the coincidence of the M vs. H/T plots at various temperatures. According to the thermodynamic theory, magnetic entropy change decreases with increasing temperature.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.403-406
• /
• 2013

This paper describes a simple route to synthesis of water-dispersible monodisperse maghemite (${\gamma}-Fe_2O_3$) nanocrystals using 6-aminohexanoic acid (AHA) as a stabilizer. The water-dispersible ${\gamma}-Fe_2O_3$ nanocrystals with an average size of 5 nm were obtained simply by addition of $Fe(CO)_5$ into an octyl ether solution containing AHA at $195^{\circ}C$ under argon condition. As-prepared AHA coated ${\gamma}-Fe_2O_3$ nanocrystals exhibited highly crystallinity and magnetic property while keeping a good dispersity in an aqueous phase. We also obtained water-dispersible AHA coated ${\gamma}-Fe_2O_3$ nanocrystals using ligand-exchange method, demonstrating that AHA can be a good candidate for preparing water-dispersible uniform metal oxide nanocrystals.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.40-44
• /
• 2006

[ $Zn_{0.5}Ni_{0.5}Fe_2O_4$ ] nanoparticles have been prepared by a sol-gel method. The structural and magnetic properties have been investigated by XRD, SEM, and Mossbauer spectroscopy, VSM. $Zn_{0.5}Ni_{0.5}Fe_2O_4$ powder that was annealed at $300^{\circ}C$ has spinel structure and behaved superparamagnetically at room temperature. The estimated size of superparammagnetic $Zn_{0.5}Ni_{0.5}Fe_2O_4$ nanoparticle is around 7 nm. The hyperfine fields of the A and I patterns at 4.2 K were found to be 510 and 475 kOe, respectively. The blocking temperature $(T_B)$ of superparammagnetic $Zn_{0.5}Ni_{0.5}Fe_2O_4$ nanoparticle is about 90 K. The magnetic anisotropy constant and relaxation time constant of $Zn_{0.5}Ni_{0.5}Fe_2O_4$ nanoparticle were calculated to be $K=1.6\times10^6erg/cm^3$.