• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.450-455
• /
• 2017

A shield connector is an automotive electrical component that is used to connect electrical wiring in a vehicle. This part is made by progressive pressing using a phosphor bronze material with high electrical conductivity. The shape of the product is not complicated, but plastic forming techniques are required, such as deep drawing and bending, as well as shearing techniques such as piercing and notching. The finite element method was used to model the process. The strip layout design stage of the progressive die makes it possible to examine the thickness change, the stability of the forming process, and the spring-back. As a result of this analysis, it is possible to predict the correction values for the tendency of cracks, wrinkles, and incomplete plastic deformation, and to identify possible problems in advance. As a countermeasure against the forming error caused by the drawing process analysis, the drawing shape was modified and applied in the process design. For effective material utilization, a 3D strip layout was designed using an optimized blank shape based on nesting. The results improve the crack stability and spring-back of shield connector products produced through progressive pressing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.963-969
• /
• 2015

Bicycle is one of the most popular mode of transport due to the increase of interest in the well-being and environment pollution. Before fabricating a continuously variable transmission that is applied to the actual bicycle, for reducing the problems in the early stage, the reliable simulation program has been applied and the financial problem can be solved. In this paper, in order to confirm the design factor, the stress analysis has been applied. In all models, each link and the joint portion are assumed to be a major design factors, and impact of each link and joints received stress during the operation and it is confirmed by using the CAE. Also, for the analysis region, the special code has been developed to calculate pulsation phenomenon through appropriate mathematical modeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.961-967
• /
• 2007

Automatic water feeding system for chickens is the one of the most important devices at poultry farms. Chickens drink water directly from a water feeder nipple of the automatic water feeder. Check valve inside the water feeder nipple is open when they drink water and is closed otherwise. There are two types of nipples. One is the piston nipple, and the other is the ball nipple. Because the nipple stick in the ball nipple can move freely, the sloping mechanism of the ball nipple works well. but it has complicated mechanism. On the other hand, the piston nipple has very simple structure, but its movement is limited so it can move only up-and-down. To overcome those limitation, the piston nipple with sphere valve seat face (sphere face piston nipple) has been developed and is just distributed at domestic markets. The experimental performance test of the commercialized sphere piston nipple has been conducted, and compared with the performance of the ball nipple and the piston nipple which are domestic products. As the result, sphere piston nipple shows excellent performance compared to that of the piston nipple but its performance is similar to ball type nipple.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.7
• /
• pp.327-332
• /
• 2016

This study is a leading research project to develop an automatic grade decision making algorithm of a 6-years-old fresh ginseng. For this work, we developed a Ginseng image acquiring instrument which can take 4-direction's images of a Ginseng at the same time and obtained 245 jingen images using the instrument. The 12 parameters were extracted for each image by a manual way. Lastly, 4 parameters were selected depending on a Ginseng grade classification criteria of KGC Ginseng research institute and a survey result which a distribution of averaging 12 parameters. A pattern recognition classifier was used as a support vector machine, designed to "k-class classifier" using the OpenCV library which is a open-source platform. We had been surveyed the algorithm performance(Correct Matching Ratio, False Acceptance Ratio, False Reject Ratio) when the training data number was controlled 10 to 20. The result of the correct matching ratio is 94% of the $1^{st}$ ginseng grade, 98% of the $2^{nd}$ ginseng grade, 90% of the $3^{rd}$ ginseng grade, overall, showed high recognition performance with all grades when the number of training data are 10.

• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.85-92
• /
• 2009

This paper studied on the development of standardization tester for the field inspection of the rate of rise spot type heat detector. It was to find the problems of the 4 type's testers such as A type (electric bulb type), B type (halogen lamp type), C type (heating coil type), D type (fumigator type) which were used to check of the rate of rise spot type heat detector in inspection for the fire protection. To identify those problems, this paper described about the development of standardization tester for the field inspection of the rate of rise spot type heat detector and that have the function of auto setting temperature more $30^{\circ}C$ higher than room temperature and keep the constant temperature. And keep the constant wind velocity of 85cm/sec. Performance verification results of the developed prototype that had same conditions such as the sensitivity test conditions at the type approval of the rate of rise spot type heat detector.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.15-23
• /
• 2010

Placement method for fire detectors prescribed in current fire safety regulation is just about placing a prescribed number of detectors according to the areas. However, this regulation has no scientific basis and standards from foreign countries are just introduced and fire detectors are installed complying with them. There are two standards in designing fire protection systems; Prescriptive-Based Design that follows stipulated regulations like fire safety standards and Performance-Based Design based on engineering knowledge such as fire dynamics, structural dynamics, mechanics of materials, fluid mechanics, and thermo dynamics. Recently, Fire Protection System Construction Business Act was revised so that fire protection systems can be designed using Performance-Based Design method ('05. 8. 4), though the method has not activated until now. In addition, the enforcement decree defines the range for specific objects of fire protection to which Performance-Based Design is applied ('07, 1. 24). At the moment, by manufacturing simulator so that formulas can be introduced and calculated with software in order to install fire detector of automatic fire detection systems keeping optimized distance, comparing the results with the state of fire detector placed according to Performance-Based Design and analyzing them, this study was intended to settle Performance-Based Design method in the future.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.123-129
• /
• 2016

In this paper, results of produced PCU(Power Control Unit) prototype was showed by suggesting and maintaining optimal operation status which let the three functional modules automatically operate with its necessity by prioritizing operation process. In order to validate effectiveness of the suggested method, we produced a test PCU and examined the results. PCU consists of S3R(Sequential Switching Shunt Regulator), BCR(Battery Charge Regulator), and BDR(Battery Discharge Regulator): converting photovoltaic power into constant voltage at linked bus voltage; storing dump power in the battery which is an auxiliary energy storage device; and supplying power charged in battery to the load. To maintain its high reliability and optimal condition of these three power conversion modules, each module operates in parallel and stable bus voltage is required to be retained at all-time due to the nature of power supply for satellite.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.545-548
• /
• 2009

Recently, researches related to automative mechanism have been widely studied to increase the driver's safety by continuously monitoring the driver's health condition to prevent driver's drowsiness. This paper describes the design of wearable chest belt for ECG and reflectance pulse oximetry for $SpO_2$ sensors based on wireless sensor network to monitor the driver's healthcare status. ECG, $SpO_2$ and heart rate signals can be transmitted via wireless sensor node to base station connected to the server. Intelligent monitoring system is designed at the server to analyze the $SpO_2$ and ECG signals. HRV(Heart Rate Variability) signals can be obtained by processing the ECG and PPG signals. HRV signals are further analyzed based on time and frequency domain to determine the driver's drowsiness status.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.30-35
• /
• 2002

This study is for developing an algorithm to detect defects of manufactured textile fiber. We used CCD Video Input Equipments in order to capture fiber textile images. Though most of the fiber manufacturing procedures consist of automatic systems, present textile detecting systems are depending on manual inspection system. However this method is not very economical. Therefore we can expect high production rate in the fiber manufacturing area if we could develop and utilize an image processing algorithm to inspect defects of textile fiber. The study was aimed at and achieved development of an detecting algorithm using image processing methods and related mechanical system which enable to detect missing of threads, mixing of unnecessary materials, polluted areas, scars, and colour differences in the textile. Through this study we could devise a manless system for detection of fiber textile and Provide possibilities which apply the image Processing techniques to the other manufacturing inspection systems.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.109-116
• /
• 2021

In this paper, we propose the educational model for a convergence minor by fusing culinary arts with robot technology to develop coding ability for the students in the culinary arts major which is not originally related to software field. It is meaningful that the educational model follows the trend along the development of the fourth industrial revolution technology and has the function to make the students who are not in software major grow as software experts. However there are difficulties in designing the convergence minor because the culinary arts major is distant to the robot technology in the view of technology. To overcome this difficulty the convergence minor is designed to attract the interest for the students in culinary arts major by construct educational subjects systematically such as cooking, dessert making, barista working, autonomous serving and so on based on robots. Also the practices in which various robots are utilized are included in the convergence minor to develop actual coding ability. By comparison to the other models of convergence minors, the proposed model shows enhanced educational effects in 20% than the others.