• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1566-1571
• /
• 2003

The cold plate used for a CEU(Control Electronics Unit) of an EV(Electric Vehicle) is extremely important since the dissipation of the heat generated from power devices like IGBT(Insulated Gate Bipolar Transistor) and diode has a significant effect on the performance as well as the durability of the CED. The cold plate consists of seven power devices, and coolant flows through the passage bonded to a groove of the cold plate. In order to find out heat transfer and pressure drop characteristics, series of numerical analyses for the cold plate with enhanced coolant passages were conducted. Based on results of the numerical analyses, an improved model of the cold plate has been proposed. The experiments under the various conditions have been conducted to compare the performance of the proposed cold plate to the present one. As a result of the numerical analyses together with the experiments, the ideal design of the cold plate could be offered.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.49-51
• /
• 2020

본 논문에서는 전기자동차 급속 충전 시 배터리 팩의 온도 모사를 위한 열 모델링 기법을 제안한다. 배터리 등가 회로 모델을 기반으로 배터리 팩 내부 발열량을 계산하고, 배터리 열 모델 구성을 위한 파라미터 추출 실험 방안을 제안하다. 또한, 전기자동차 방열 시스템의 영향 등으로 인한 발열량 변화를 실시간으로 보정하여 온도 모사 정확도를 개선한다. 열 모델링 기법의 유효성 검증을 위하여 전기자동차용 배터리 팩 기반의 시뮬레이션 및 실험을 진행한다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.4
• /
• pp.265-270
• /
• 2002

Most of all the mechanical devices are becoming more high-speed and high-power as well as their used condition being more pollution with rapid development in industrial part. So, it is necessary for these devices to equip cooling system to overcome that kind of severe using condition. Industrial development and income increase causes rapid increase in using fossilenergy and it results in accelerating environmental pollution owing to the increasement in emission of air pollution substance. Specially, fresh water like stream and river water is acidified. Therefore, corrosion damage is accelerated in radiator for automobile that is using acidified water. So, in this study, corrosion test was carried out in distilled and tap water for the investigation on the corrosion behavior of Al-alloy that is using as material for radiator of automobile The main results obtained are as follows According to increase of temperature, open circuit potential is decreased in fresh water. And open circuit potential after deaeration is lower than that before deaeration. Corrosion current density in distilled water is less drained than that of tap water. And Corrosion current density after deaeration is less drained than that before deaeration.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.722-728
• /
• 1997

This study was investigated to find storage material of thermal energy storage system for a vehicle with the basic material of $Ba(OH)_2{\cdot}8H_2O$ and to test a feasibility of it. Experiment was investigated usability for long time and state change and thermal property after cycle with $Ba(OH)_2{\cdot}8H_2O$ and misxture doping additive to it. The result of this research indicated the mixture adding $Sr(OH)_2{\cdot}8H_2O$ to $Ba(OH)_2{\cdot}8H_2O$ have high feasibility as storage material for thermal energy storage system. This mixture did not exhibit the state change during 1300 cycles and the rate of decrease of heat realese energy was about 2%, relatively low value.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.211-221
• /
• 1998

Thermal behavior on the cylinder block of a 4-cylinder, 4-stroke 2.0L SOHC gasoline engine was numerically and experimentally analyzed. The numerical calculation was performed using the finite element method. The cylinder block was modelled as a three dimensional finite element by considering its geometry. The physical domain was devided into hexahedron elements. 16 thermocouples were installed at points of 2mm inside from cylinder wall near top ring of piston in cylinder block, which points have suffered major thermal loads and suggested as proper measurement points for engine design by industrial engineers. Under full load and 9$0^{\circ}C$ coolant temperature condition, temperature behavior of cylinder block according to engine speed were analyzed. The results showed that temperature rose gradually to conform to a function of 2nd~4th order of engine speed at intake side, exhaust and siamese side, respectively. As engine load was changed from 100 to 50% by 25% step, temperature curve also conformed to 2nd~7th order function of engine speed. Temperature differences by load condition were similar among 100, 75% and 50%. Under full load and coolant temperature of 11$0^{\circ}C$, temperature behavior were also analyzed and the result also showed conformance to 2n d~7th order function of engine speed. Temperature curve was transferred in parallel upwards corresponding coolant temperature rise.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.133-138
• /
• 2009

A mortar system is able to be fired more rapidly and concentratedly than other field gun systems. A mortar system can be easily manufactured because of its simple structure. It has also been supporting for the fire power of infantry because it can be carried conveniently. But a mortar system has demerits that are the limited firing range, poor accuracy and uncomfortable operability. Korean army plan to be operated rapidly and enlarge battle field in the near future. So weapon systems of Korean army must have longer firing range, automatic laying function and precision firing capability. This study suggests efficient developing concept of 120mm self-propelled mortar system through surveying the technical readiness level of current R&D and manufacturing ability.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.128-140
• /
• 1997

A new super compact condenser(SCC), which has been developed recently is especially suitable for an alternative refrigerant HFC-134a due to its high performance and compactness. The SCC is composed of two pipe headers, baffles, narrow multi-rectangular channels, and louvered fin arrays. Alternating inlet and outlet by the inserted baffles in pipe headers guide refrigerant to and from the narrow multi-rectangular channels. Since the flow rate and its lengh are changed depending on the number and location of baffles, the corresponding pressure drop and heat transfer rate are changed. The present study aims to theoretically and experimentally investigate the effects of baffle location and its number on the pressure drop and thermal performance of the SCC with 40 multi-rectangular channels. The results show that the present method provides an acceptable prediction of pressure drop and heat transfer rate for a 4 pass SCC. However, the model significantly under predicts the performance of a 3 pass SCC, which may be attributed to the phase separation of refrigerant flowing through header pipes. Pressure drop is more signifi- cantly influenced than heat transfer rate by the baffle location.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.53-58
• /
• 2020

Analysis of electric semiconductor packaging technology for electric vehicles was performed. Topic modeling using LDA technique was performed by collecting valid patents by deriving valid patents. It was classified into 20 topics, and the definition of technology was defined through extracted words for each topic. In order to analyze the trend of each topic, the trend of power semiconductor packaging technology was analyzed by deriving hot and cold topics by topic through regression analysis on frequency by year. The package structure technology according to the withstand voltage, the input/output-related control technology and the heat dissipation technology were derived as the hot topic technology, and the inductance reduction technology was derived as the cold topic technology.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.25-28
• /
• 2008

본연구는 부스트형 대기압 플라즈마 전원장치에 대한 연구로서 부스트형 전원장치는 플라즈마의 발생을 원활하게 하기위해 커패시터로 모델링되는 부하단에 인가되는 전압을 직접 제어하는 방식을 의미한다. 기존의 정현파 공진형 전원장치는 PWM기법을 이용하여 펄스의 폭을 증감하는 방식으로 전압의 크기를 제어하지만 이 방식은 별도의 공진회로를 이용하여 공진을 일으킨 다음 이를 부하에 인가하는 방식으로 구성되기 때문에 속응성이 떨어지고 균일한 플라즈마를 발생시키기 어렵다. 부스트형 전원장치는 별도의 부스트 컨버터로 직류전압을 제어하여 부하단에 입력되는 전압을 직접 제어하므로 매우 균일한 플라즈마를 발생시킬 수 있는 이점이 있으나 별도의 부스트용 스위치가 필요하고 이로 인한 효율의 감소 및 사이즈의 증가가 되는 문제점이 생긴다. 본 연구에서는 커패시터로 모델링되는 부하를 이용하여 직접 공진을 일으키고 공진된 부하 전압을 직접 부스트 스위치에 인가시키는 방식으로 부스트용 스위치의 소프트 스위칭이 가능한 새로운 방식을 개발하였다. 개발된 방식에서는 부스트용 스위치가 ZCS형태로 켜지고 ZVS형태로 꺼지는 특성을 갖게 되므로 별도의 추가 회로 없이도 획기적인 효율 증가와 방열판 사이즈의 감소로 인한 제품의 경량화가 가능한 장점이 있다. 또한, DC링크 커패시터의 최소화로 인하여 부하단의 아크 문제가 자동적으로 해결되는 장점도 있다. 제안된 제어 방식은 시뮬레이션과 실험으로 그 타당성을 입증하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.117-123
• /
• 2018

Automotive headlamps have been continuously developed as one of the most important devices for securing the driver's view, and the LED lamps are getting popular in recent years. However, in case of the LED lamps, because the heat generated by the LED lamps are too high, it shorten the product life and lower the LED efficiency. Therefore, this study was investigated the cooling characteristics of the LED lamp heat sink for automobile by forced convection for LED heat generation control. In order to analyze the cooling characteristics of the heat sink, the temperature distribution results were investigated through the experiment and computational analysis under the increase of the air flow velocity, and the convective heat transfer coefficient was obtained. Also, convective heat transfer coefficient was calculated by the theoretical formula under the same condition and compared with experimental and computational results. From the result of this study, as the air flow velocity around the heat sink fins increased, the convective heat transfer coefficient significantly increased, confirming the improvement in the cooling effect.