• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.162-165
• /
• 2007

TFT-LCD process has two advantages as compared with the semiconductor-process. It is that cycle time is short and number of the final products are small. But it needs complicated inspection / assembly line to be treated manually and much higher labor costs in the TFT-LCD process. Also, It is necessary to build PICS(Production Information and Control System) which is automated and intelligent. In this paper, an automated process of LCD module assembly line that can increase productivity and reduce the cost of production to strengthen the competitiveness corresponding with global market is planned in comparison with its manual/semi-auto. It is noted that The automated line for COG$\sim$FOG process replacing with the existing facilities had the following effects; the productivity is increased to about 1.5 times and labor cost reduced 85%. In addition, whole assembly line can be short and simple.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.72-79
• /
• 1995

The purpose of this paper is to develop an automatic measuring system based on the digital image processing which can be applied to the in-process measurment of the characteristics of the thin thickness. The derivative operators is used for edge detection in gray level image. This concept can be easily illustrated with the aid of object shows an image of a simple light object on a dark background, the gray level profile along a horizontal scan line of the image, and the first and second derivatives of the profile. The first derivative of an edge modeled in this manner is 0 in all regions of constant gray level, and assumes a constant value during a gray level transition. The experimental results indicate that the developed automatic inspection system can be applied in real situation.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.311-313
• /
• 1994

RC(Rod Consolidation) technology in spent nuclear fuel management is an essential method and requires remote operation due to radiation exposure. Its technology may provide an effective means to double the storage capacity of spent fuel storage space. So development of this technology will provide a valuable contribution to establishing economical as well as technological basis for future spent fuel management.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.869-874
• /
• 2014

It is possible to fabricate a three-dimensional (3D) shape using the solid freeform fabrication (SFF) technology. However, there are several problems in applying conventional SFF technologies to the direct manufacturing of a product. Hence, multimaterial SFF is gaining attention. Moreover, a 3D circuit device that is different from a conventional two-dimensional PCB can also be fabricated using multimaterial SFF. In this study, a hybrid system using fused deposition modeling and direct writing was designed for 3D circuit device fabrication.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.908-913
• /
• 1998

The productivity of land based seawater fish farm has been decreased because of unexpected outbreaks of diseases caused by the contaminated inlet seawater. Sometimes unfiltered/untreated outlet seawater from the land based seawater fish farm has created serious environmental problem. In the needs of treatment systems for the inlet and outlet seawater, the researchers have developed two different systems, The purpose of this study is to design and test two treatment systems, the screen filter for inlet seawater and drum filter for outlet seawater, on the basis of concept of system design and automatization. After developing two systems, an experiment has been conducted with two systems and collected data to improve design and efficiency of the system. In this study, detailed design and efficiency of the system could be improved by the programmable logic controller (PLC).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.89-98
• /
• 2002

Optical current sensor and optical voltage sensor modules were designed and fabricated to improve measurement error and insulation in automatic power distributor By using Faraday effect, optical current sensor with an $\alpha$-iron core was designed and fabricated to minimize current induction of the other phase and was optimized to maintain linearity. Optical voltage sensor was fabricated owing to the pockets effect and adopted spatial electric field type because of small room in an automatic power distributor. To connect a distributor with an external terminal for signal processing, optical multi connector was designed, fabricated and tested for coupling loss and gas leakage. The linearity of optical current sensor for applied current maintains variation of smaller than 2.5% for applied current range from 20A to 700A. The linearity of optical voltage sensor was smaller than 1% for appling voltage from 6.6kV to 19.8kV. Since the measured characteristics are good, these devices can be considered as being applicable in practice.

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.141-154
• /
• 2004

The solar powered water pump is very ideal equipment because solar power is more intensive when the water is more needed in summer and it is very helpful in the rural area, in which the electrical power is not available. The average so]ar radiation energy is 3.488 kWh/($m^2{\cdot}day$) in Korea. In this study, the automatic control logic and system of the water pump driven by the radiation energy were studied, designed, assembled, tested and analyzed for realizing the solar powered water pump. The experimental system was operated automatically and the cycle was continued. The average quantity of the water pumped per cycle was about 5,320 cc. The cycle time was about 4.9 minutes. The thermal efficiency of the system was about $0.030\%$. The pressure level of the n-pentane vapour in flash tank was 150$\%$450 hPa(gauge) which was set by the computer program for the control of the vapour supply. The pressure in the condenser and air tank during cycles was maintained as about 600 hPa and 1,200 hPa respectively. The water could be pumped by the amount of 128kg/($m^2{\cdot}day$) with the efficiency of $0.1\%$ and the pumping head of 10 m for the average solar energy in Korea.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.117-121
• /
• 2024

기존의 외장 하드디스크는 보안 기능의 부재로 인하여, 비인가자로부터 디스크가 탈취되는 경우에는 저장된 데이터가 유출되거나 훼손되는 문제점이 존재한다. 이러한 문제점을 보완하기 위하여, 보안 기능을 제공하는 보안 외장 하드디스크가 등장하였지만, 보안 기능 중 패스워드나 지문 인증과 같은 사용자 인증을 우회하는 취약점이 지속적으로 발견됨으로써, 비인가자가 장치 내부에 안전하게 저장된 데이터에 접근하는 보안위협이 발생하였다. 이러한 보안위협은 국가사이버안보센터에서 공개한 보안 요구사항을 만족하지 못하거나, 만족하더라도 설계나 구현 과정에서 내포된 취약점으로 인하여 발생한다. 본 논문은 이와 같이 보안 외장 하드디스크에서 발생하는 취약점을 점검하기 위한 목적으로 보안 외장 하드디스크 익스플로잇 프레임워크를 설계하였다. 취약점을 점검하기 위한 전체 프레임워크를 설계하였고, 프레임워크에서 제공하는 각 기능 및 유즈케이스 다이어그램을 설계하였으며, 설계된 프레임워크를 활용한다면, 현재 상용화되었거나 추후 개발될 보안 외장 하드디스크를 대상으로 안전성을 평가할 것으로 판단된다. 그뿐만 아니라, 안전성 평가 결과를 기반으로, 보안 외장 하드디스크에 내재된 취약점을 보완함으로써 안전성을 더욱 향상시키고, 수동으로 분석하여야만 하는 보안 외장 하드디스크의 취약점 점검을 자동화함으로써, 안전성을 평가하는 시간과 비용 또한 절감할 것으로 사료된다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.129-130
• /
• 2008

텐터의 성능을 결정하는 요인은 여러 가지가 있으나, 섬유의 종류 또는 가공 공정의 목적에 따라 적절한 건조속도 및 효율성, 원단의 전 폭에 걸친 건조 균일도, 습윤 공기의 자동 배출, 원단의 장력 및 오버피드, 그리고 각종 자동화 제어 장치의 활용 등으로 구분되어 질 수 있으며, 그러므로 텐터기 챔버 내부의 공간구조에 따른 비효율적 유로형상과 공기 분사노즐 정확한 압력 및 온도분포에 대한 현장 기초자료를 확보하여 텐터의 에너지 절약 및 건조 원단의 품질을 향상시킬 수 있는 구조의 설계가 요구된다.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.25-32
• /
• 2010

A geortor type pump is widely used in lubrication and actuator systems. Especially the pump is an essential machine element of an automotive engine to feed lubrication oil and power source of automatic transmission. A gerotor is a planar mechanism consist of a pair of rotor and circular tooth of stator assembly which forms a closed space. However, related industries do not have necessary technology to design and optimize the pump and paid royalties of gerotor profile on an advanced company. Also, gerotor profiles with setting design parameter have not been sufficiently analyzed from a theoretical view. Therefore, it is very difficult for designer to decide the specifications of the gerotor profiles, and calculation and fluctuation of flow rate is not yet confirmed. In this study, theoretical analyses and optimal design of the gerotor profiles have been performed numerical method by mathematical base. An automated design system of the tooth profile has been developed through MATLAB GUI Program considering various design parameters.