• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.273-284
• /
• 2020

This paper proposes a method of designing and controlling delta robots with low-cost DC motors, which are widely used in the automation process. Simulation was performed by interpreting the mechanics and dynamics of the delta robot, and based on this analysis, low-cost DC motor was selected. Experiments were conducted to obtain characteristic values of motors and the current-position cascade control system was designed and implemented. In order to verify the feasibility of the proposed system, the experiment to check that the end-effector of the delta robot follows the target path was progressed. Through the experiment, the limitations of using low-cost motors were overcome by designing compensation algorithms and the performance of the position control was verified.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.65-75
• /
• 1993

원자력발전소에서 발생하는 고장정지 사건에 내포된 인적오류의 발생내용을 흥미있고 현장감 있게 묘사시킴과 동시에 종사원들의 인적오류를 저감시키기 위한 새로운 교육훈련방 법으로써 멀티미디어 기술의 사용을 고려하였다. 즉, 컴퓨터 환경하에서 숫자와 텍스트, 음 향 및 음성, 그래픽, 애니메이션, 화상 등의 미디어를 사용하여 인적오류로 인한 고장정지 사건발생의 내용을 전달하는 새로운 교육훈련 방법을 사용하는 것이다. 이를 위하여 고장정 지 사건과 관련한 원자력발전소 구성정보와 종사원의 활동정보를 입출력하기 위한 멀티미디어 인터페이스를 설계하였다. 설계는 멀티미디어 제공환경 구축과 인터페이스 운영논리 설정의 두단계로 구성한 절차에 따라 수행하였다. 멀티미디어 인터페이스는 원자력발전소 구성정보를 설계하여 저장시켜둔 퍼스널 컴퓨터 환경하에서 운영되며, 입력 및 출력의 두가지 인터페이스 를 갖는다. 입력 인터페이스는 인적 오류를 포함한 고장정지 사건의 발생내용을 숫자, 텍스트, 음성 미디어로 받아들여 출력 인터페이스에서 사용될 수 있도록 미디어 결합을 수행하고, 컴퓨터 저장장치에 저장하는 기능을 수행한다. 출력 인터페이스는 저장장치에 기록된 내용을 판독하여 고장정지의 진행경위와 인적오류의 발생내용을 숫자, 문자, 텍스트, 음성, 음향, 그래픽 애니메 이션, 정지화상으로 원자력발전소 종사원들에게 출력시켜 주는 기능을 수행한다. 멀티미디어 출력정보는 사용자가 CRT 화면에 제공되는 버튼 또는 Click Touch 메뉴를 사용함에 따라 이전, 이후의 출력정보로 전이할 수 있도록 하였다.상대적으로 중요한 검사 항목으로 나타났다. 또한 상대적 중요도 결과를 적용한 적성검사 성적이 적용하지 않은 적성검사 성적에 비해 비행성적에 대한 예측 능력이 좋은 것으로 평가되었다.al age)가 있다는 것을 의미하는 것이다. 한편, 생산현장에서는 자동화, 기계화가 진보되어 육체적인 노동이 경감된 결과, 중고령자라도 할 수 있는 작업이 많아지고 있다. 또, VDT (Visual Dislay Terminal) 작업과 같은 정보처리 작업의 수요가 증가하여 그 인재의 부족이 지적되고 있다. 따라서 중고령자의 기능을 조사하여 어떠한 작업에 적합한가를 판단하는 것이 중요한 과제로 되었다. 그러나 노동에는 많은 기능이 관여 하고, 그 내용에 따라서 요구되는 기능이 서로 다르기 때문에 노동적응능력의 기본적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.135-143
• /
• 2011

Currently network management systems(NMS) just give useful information about the criticality of the alarms and the process of the fault analysis is mainly dependent on the experts who have many years experiences in the field. Due to these reasons it takes very much time and manpower cost to localize the real root of the fault from the alarm information. Therefore, to solve these problems in this research we analyze the probability of the fault for each alarm and provide how to give the problem solving procedure with confidence level and give idea to build a system to realize the problem solving procedure. In addition, we give a case study to show how to use the proposed ideas.

• Journal of Veterinary Clinics
• /
• v.13 no.2
• /
• pp.171-176
• /
• 1996

In this study, dldctronic identification system of individual dairy cow was developed for autocatization of stoxkvreeding management. To automize the breeding management, it is necessary to obtain and analyze the individual information distinguished from others perferentially. Electronic identification system can distinguish individual livestock from others with electromagnetic wave signal recognition system. Electoronic identification system consists of transmitter transmitting the oscillated signal and receiver set. The transmitted signal from transmitter clung to individual livestock is received from the receiving antenna and the signal in different according to the established value of the register. By distinct signal recieved from the reciever, wi can distinguish the identity of a livestock from others clearly. This system can manage $2^{12}$ individuals with a reciever theoretically. However in order to reduce the errors by analogous signal, this system uses only triple number and can manage 1365 individuals with a reciever practically. This system can be connevtted to Max 232 and microcomputer for the breeding management efficiently.

• Journal of Welding and Joining
• /
• v.14 no.6
• /
• pp.119-130
• /
• 1996

Welding is one of the important technologies in shipbuilding industry. Automation and productivity promotion of welding contribute to the cost saving of ship production. The quality and productivity of welding are dependent on the quality and suitability of technical information supplied by engineering parts. This paper describes the research results of welding information system for ship. The system can be used for the development of CIMS for shipbuilding. For this work, the welding information related to the ship Production were analyzed in detail. Object-oriented technique is applied to represent the complex and various welding information. To process the extend amount of the welding information of ship, database system was constructed. A pilot system for the bulk carrier ship was developed and can be used with ease by programming of event-driven method and implementaion of graphical user interlace.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.276-281
• /
• 2008

Because the distribution systems experience frequently the fault by several causes, the identification task of fault location plays very important role in the view point of power supply reliability. The distribution systems are designed as radial structure with three-phase and single-phase branch line to supply the electric power to the widely dispersed loads, and it have a several load taps within each line segment. it makes the accurate fault distance determination difficult. Accordingly in this papers, the existing fault point determination methods are surveyed and analyzed, and then a fault distance determination method for distribution feeder is adopted which can be executed effectively in DAS center. Finally, the adopted method is verified using EMTP simulation.

• Convergence Security Journal
• /
• v.9 no.1
• /
• pp.11-17
• /
• 2009

The object of this paper is to design a school-zone safety management system based on context-aware, integrated with computing technology. When it occurs to kidnap of elementary school students, the monitoring device creates context information through a combination object extraction and context-aware technology and alarm administrator about an emergency situation. In addition, the proposed system that requires a human perspective, a railroad crossing, statistics research of traffic, and a variety of applications such as factory automation systems can be used to be the best choice.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.785-797
• /
• 2014

Support for the precise time synchronization of EtherCAT, known as distributed clock (DC), enables the design of highly synchronized operations in distributed real-time systems. This study evaluates the performance of the EtherCAT DC through extensive experiments in a real automation system. We constructed an EtherCAT control system using Xenomai and IgH EtherCAT stack, and analyzed the clock deviation for different devices in the network. The results of the evaluation revealed that the accuracy of the synchronized clock is affected by several factors such as the number of slave devices, period of drift compensation, and type of system time base. In particular, we found that careful decision regarding the system time base is required because it has a fundamental effect on the master operation, which results in significantly different performance characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2349-2354
• /
• 2009

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system being actively developed, but are still high price and visual information is passed through the cable, because of cars are difficult to install. In this paper, can be installed inside the car at low-cost, simple image processing device through a wireless communication know the obstacles and the alarm system based on Zigbee wireless communication, infrared and ultrasonic sensors to monitor the situation through with easy parking cars outside the system design was implemented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.513-516
• /
• 2013

In this paper, we present an information collecting system in medical information management domain. Our proposed system performs a systemized process, consisting of collection, transmission, and management, to develop intelligent medical information system and medical big data processing system. Our information collecting system consists of low-power biomedical sensors, biomedical information collecting devices, and storage systems. Currently, almost biomedical information of patients is collected manually by employees like nurses and medical doctors. Therefore, collected biometric data can be error-pronoun data. Since there is a lack to make big data of medical information, it is difficult to enhance the quality of medical services and researches. Accordingly, through our proposed system, we can overcome the problems like error-pronoun biometric data. In addition, we can extremely extend the area of collectable biometric data. Furthermore, using this system, we are able to make a real-time biomedical analysis system, like a real-time patient diagnosis system, and establish a strategy to against future medical markets changing rapidly.