• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.1-8
• /
• 2020

Air ducts installed for ventilation inside buildings accumulate contaminants during their service life. Robots are installed to clean the air duct at low cost, but they are still not fully automated and depend on manpower. In this study, an intersection detection algorithm for autonomous driving was applied to an air duct cleaning robot. Autonomous driving of the robot was achieved by calculating the distance and angle between the extracted point and the center point through the intersection detection algorithm from the camera image mounted on the robot. The training data consisted of CAD images of the duct interior as well as the cross-point coordinates and angles between the two boundary lines. The deep learning-based CNN model was applied as a detection algorithm. For training, the cross-point coordinates were obtained from CAD images. The accuracy was determined based on the differences in the actual and predicted areas and distances. A cleaning robot prototype was designed, consisting of a frame, a Raspberry Pi computer, a control unit and a drive unit. The algorithm was validated by video imagery of the robot in operation. The algorithm can be applied to vehicles operating in similar environments.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1000-1007
• /
• 2011

Home Networking will be implementing the interactive network by home appliances over wireless/wireline network framwork. That is, Home appliances, which are being operated within home space configure the network through wireline/wireless network infrastructure for interworking and interacitive services by external internet access. Based on home networking, smarthome is home space where can use automatic telecommunication and interactive service by home appliances. we can call smarthome based on home networking infrastructure as the conceptual gateway for evolving future converged space like u-city. From simple home control service to home automation service over home networking infrastructure, smarthome service is evolving to up-to-date intelligent life environment in growth of IT technology. however, its service model development was based on supplier-centered based on advanced IT technology. because of this situation, smarthome service has not been acknowledged IT underprivileged people as well as IT early-adaptor. so, this research paper will consider and try to find out what will be the feasible factors to make the best service for IT underprivileged people.

• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.1-10
• /
• 2020

National R & D data covers information in all fields from basic science research to industrialization, but it is expressed in technical terms, which make it difficult for the public to use. Accordingly, NTIS developed and launched the data curation service 'R&D issue service', which selects national R&D information on national and social issues and provides them to the public. Therefore, this study aims to analyze the effect of a data curation service on NTIS users' access to R&D data and suggest how to develop the curation service. The R&D issue service extracts issue from the news article and provide related national R&D projects, achievements and major research institute. All raw data used for the service are open to the public, organized in a report format and provided as PDF files. In addition, automative process is developed for all NTIS users to make individual issue packaging like administrator. The results show that 'R&D issue service' launching increases users' access and convenience to R&D data related to major issues, and the number of page views of users increased after the service was opened.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.49-55
• /
• 2017

Most motor cases adopt deep drawing products, which are excellent in waterproof functions, concentricity, right angle, and quality. In addition, the blower motor and seat motor, which are installed in the car interior and do not require waterproof function, adopts a multi-forming manufacturing method. The deep drawing process requires an expensive transfer press that can digest approximately 12 processes, such as drawing, trimming and piercing. On the other hand, products can be produced with low investment because the multi-forming method is composed of one multi-forming machine or one multi-forming machine and one press. The multi-forming machine is a high-priced facility that is mostly imported and a bending / shearing process multi-foaming machine, which was developed by domestic small and medium-sized enterprises, is not enough to reduce the production cost. An integral multi - forming machine is used as a limited working method for thin material and small products. A large product and thick material has a high shear load. A large product and thick material has a high shear load and uses a single crank press. After blanking, the worker manually feeds the material to a multi-forming machine. When the bending operation is performed in the multi-forming machine, it is transferred to the press again to calibrate the dimensions. This variance in work processes has resulted in lower cost competitiveness due to the lower productivity, quality issues, and excessive operator input. The aim of this study was to establish a stable and cost - effective production system through bending / shearing process separation and facility automation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.197-202
• /
• 2018

This study was conducted to evaluate the distortion and data accuracy that may occur depending on the methods employed by the oral scanner (intra-oral scanner). Deseutap 3D models employing a plaster model used clinically as a scanner to create a standard scan data using the same model, separated by oral scanners in three different ways (AS Group, ZS group, OS group) How to scan each 5 times made the scan data for each group, it shows the 0.121 mm, 0.172 mm AS group, OS group 0.423 mm accuracy in ZS group. The ZS group showed the highest accuracy, with maximum error values of 0.113 mm, 0.169 mm and 0.246 being observed for the ZS, AS and OS group, respectively. The three scanning methods showed a clear differences in accuracy and reproducibility and also appeared to be meaningful in clinical practice.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.17-25
• /
• 2020

Based on the successful use of chatbot technology, this study examined what business values each company is creating. The chatbot service contributes to improving the productivity of the company by helping to answer or respond to the questions of employees inside the company or customers. And in the field of education, Instead of instructor, AI technology responds the questions and feedback of the students to reduce the work of the instructor. In the field of commerce, offline stores provide convenient and new purchasing experiences to customers by providing product purchasing services through artificial intelligence speakers and personalization service. Although chatbot service is creating business value in some business cases, it is still limited to the process of a specific company, and the spread rate is still slowing because the service scope, convenience, and usefulness are not greater than expected. Therefore, some chatbot development service providers is providing an integrated development platform to improve usability, Chatbots have the features and advantages of providing convenience instead of answering human questions. However, there is a disadvantage that the level of communication can be lowered by reducing various human subjective views and giving mainly objective answers. Through this study, we will discuss the characteristics, advantages and disadvantages of chatbot services by comparing them.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.183-207
• /
• 2009

In general, the introduction of information technology to domestic small and middle size firms is depending on the governmental supporting policy. However, even under this situation there is also a case that the building up of information technology is initiated by the management of small and middle size firms. An accumulated know-how for information technology and powerful leadership in such firms are considered as success factors. This study attempts to analyze a case for 'THEFACESHOP', in which MIS is successfully built. To achieve corporate goals, the CEO of THEFACESHOP based on the extensive knowledge of information technology drove to build up information system. Also, the board of directors supported him, and employees committed to their organization. Through the strong leadership of the CEO, the information system of THEFACESHOP became sufficient and efficient. And it led the organization and the information system to be competitive. In particular, the systematic approach of THEF ACESHOP reinforcing its competitiveness can be summarized as follows: First, it tried to construct basic information systems as like ERP etc. to increase work-efficiency. Second, it completed CRM related systems for analysis to maximize its customer orientation and marketing effect. Third, the last step can be stated as the building up of operation related CRM systems to improve the responsiveness of target marketing activities and the profitability of its agencies. Such endeavors of THEFACESHOP contributed to increase productivity and performance of the organization. As a result, THEFACESHOP has had its own 'Natural Story' and price competitiveness. For that reason THEFACESHOP became the best of brand-shop cosmetic firms. This success based on the strong leadership and the systematic investment on the information system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.1
• /
• pp.41-49
• /
• 2008

Many machineries and equipments are being changing to various and complicated by development of recent technology and arrival of convergence age in distant future. These various and complicate equipments need more precise outcomes and low-power consumption sensors to get close and exact results. In this paper, we proposed fault tolerance and feedback theorem for sensor network and MEMS circuit which has a benefit of energy efficiency through wireless sensor network. The system is provided with independent sensor communication if possible as unused action, using idle condition of system and is proposed the least number of circuits. These technologies compared system efficiency after examining product of each Moving Distance by developed sensor which gives effects to execution of system witch is reduced things like control of management side and requirement for hardware, time, and interaction problems. This system is designed for practical application; however, it can be applied to a normal life and production environment such as "Ubiquitous City", "Factory Automata ion Process", and "Real-time Operating System", etc.

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.29-43
• /
• 2014

The development of NGS technologies, such as scientific workflows, has reduced the time required for decoding DNA sequences. Although the automated technologies change the genome sequence analysis environment, limited computing resources still pose problems for the analysis. Most scientific workflow systems are pre-built platforms and are highly complex because a lot of the functions are implemented into one system platform. It is also difficult to apply components of pre-built systems to a new system in the cloud environment. Cloud computing technologies can be applied to the systems to reduce analysis time and enable simultaneous analysis of massive DNA sequence data. Web service techniques are also introduced for improving the interoperability between DNA sequence analysis systems. The workflow-based middleware, which supports Web services, DBMS, and cloud computing, is proposed in this paper for expecting to reduceanalysis time and aiding lightweight virtual instances. It uses DBMS for managing the pipeline status and supporting the creation of lightweight virtual instances in the cloud environment. Also, the RESTful Web services with simple URI and XML contents are applied for improving the interoperability. The performance test of the system needs to be conducted by comparing results other developed DNA analysis services at the stabilization stage.

• Korean Journal of Poultry Science
• /
• v.21 no.1
• /
• pp.21-34
• /
• 1994

The objective of this study was to develop a user-friendly computer model for economic analysis on the commercial egg production that could help the egg farmer make managerial diagnosis and rational decision in the changing environment. To raise the adequacy of the model, the program was run for every sample and adjusted to fit the data. The model, programmed with Microsoft QuickBASIC, was a user-friendly computer program in supporting the Korean language. The basic analytical tool used in the study was an engineering-type computerized simulation model which incorporates a cost-benefit analysis of a full-time egg farmer. The computer model developed in this study may be the powerful analytical tool used to evaluate both a managerial decision whether to alter the production system and its impact on production, costs, revenue, and profits. Ultimately, the program is expected to enable the egg farmer to make managerial planning and diagnosis. The program can also calculate the values of economic variables at user-chosen incremental values of market eggs and feed prices. It provides the information on the profit and cost. This may lead the egg farmer, by allowing to establish the best managerial strategy, to increase the profit aor to lessen the cost. The results of this study could be utilized in the evaluation and improvement of the management. It also may be utilized for the researchers and guiding farmers in collecting and analyzing the data on the laying hen. In particular, such a program would be potentially useful to researchers who wish to quickly estimate profits associated with various laying hen treatments. The program could also benefit the egg farmer interested in making managerial decisions based on either current or predicted market conditions. The model would make the egg farmer respond actively to the information-oriented society by promoting to use personal computer.