• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.383-383
• /
• 2018

최근 기후변화와 도시화로 인해 국지성 집중호우 및 불투수면적이 증가하고 있는 실정이며, 도시 지역 내의 첨두유량, 도달시간, 지체시간 등과 같은 수문학적 인자가 변화함에 따라 재산피해, 인명피해가 발생하고 있다. 저영향개발(Low Impact Development, LID) 기법은 수리수문학적 및 환경생태학적 문제를 저감하는 방안 중 하나로써 도시지역에서 수환경을 자연상태로 복원하는 대안으로 제시되고 있다. LID 기법 중 하나인 옥상녹화는 도시 내의 불투수면 증가로 인한 초과 지표면유출을 저감시켜 물관리를 하는 기술이다. 본 연구는 경남 양산시 부산대학교 제 2 캠퍼스에 조성된 옥상녹화 장치를 이용하여 정량적으로 유출량을 분석하였다. 비식생구와 식생구를 설치하고 실험의 시나리오는 강우강도를 25, 50, 75, 100 mm/hr로 설정하여 측정된 데이터 값을 바탕으로 SWMM(Storm Water Management Model) 모델링을 수행하였다. 유출량 값은 SWMM 5의 매개변수 추정지원 시스템인 SWMM-SCE를 이용하여 모형을 자동보정하였다. 보정된 모의유량은 실측유량과 0.28~3.81% 만큼의 오차를 보였고 각 시나리오에 따라 검증한 결과 상관계수가 0.82 이상으로서 실측값과 높은 상관성을 나타내었다. 옥상녹화 실험의 경우, 강우강도 75mm/hr일 때 첨두유출저감율과 지연시간은 각각 15.45% 감소, 15초 지연으로 최적의 효율이 나타났으며 강우강도 25mm/hr일 때 첨두유출저감율과 지연시간은 각각 1.36% 감소, 4초 지연으로 최저의 효율이 나타났다. SWMM 모의 결과는 강우강도 75mm/hr일 때 첨두유출저감율과 지연시간은 각각 15.45% 감소, 16초 지연으로 최적의 효율이 나타났으며 강우강도 25mm/hr일 때 첨두유출저감율과 지연시간은 각각 2.73% 감소, 4초 지연으로 최저의 효율이 나타났다.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.53-62
• /
• 2007

Recently, for the stabilization estimation of structures, many automatic measuring instruments with expensiveness and high accuracy have been developed and utilized. However, the existing manual measuring systems are almost impossible to measure the real-time for the whole surface of large-scale structures and an automatic measuring system has disadvantages with demanding enormous expense. In this study, 3D digital visual monitoring system was developed by using digital photogrammetry technique. To confirm application of developed system, it was applied to the measurement of the wall displacement of concrete surface and displacement measurement of reinforced-soil wall block. Then, the result of the test was compared with measuring value of total station. Based on the results of the comparison, the application of visual monitoring system was evaluated. The results show that the developed visual monitoring system could be available in displacement measure of structures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.82-89
• /
• 2024

Black ice is very difficult to recognize and reduces the friction of the road surface, causing automobile accidents. Since black ice is difficult to detect, there is a need for a system that identifies black ice in real time and warns the driver. Various studies have been conducted to prevent black ice on road surfaces, but there is a lack of research on systems that identify black ice in real time and warn drivers. In this paper, an real-time image-based analysis system was developed to identify the condition of asphalt road surface, which is widely used in Korea. For this purpose, a dataset was built for each asphalt road surface image, and then the road surface condition was identified as dry, wet, black ice, and snow using deep learning. In addition, temperature and humidity data measured on the actual road surface were used to finalize the road surface condition. When the road surface was determined to be black ice, the salt spray equipment installed on the road was automatically activated. The surface condition recognition system for the asphalt concrete pavement and black ice automatic prevention system developed in this study are expected to ensure safe driving and reduce the incidence of traffic accidents.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1167-1174
• /
• 2009

In the monitoring of a patient in a sickroom, not only the physiologic and environmental data of the patient, which is automatically measured, but also the clinical data(clinical chart)of the patient, which is drew up by a doctor or nurse, are recognized as important data. However, since in the current environment of a sickroom, clinical data is collected being divided from the data that is automatically measured, the two data are used without an effective integration. This is because the integration of the two data is difficult due to their different collection times, which leads the reconstruction of clinical data to be remarkably uncertain. In order to solve these problems, a method to synchronize the continuous environmental data of a sickroom and clinical data is appearing as an important measure. In addition, the increase of use of small machines and the development of solutions based on wireless communications provide a communication platform to the developers of health care. Thus, this paper realizes a remote system for taking care of patients based on a web that uses mobile phones. That is, clinical data made by a nurse or doctor and the environmental data of a sick room comes to be collected by a collection module through a wireless sensor network. An observer can see clinical data and the environmental data of a sickroom through his/her mobile phone, integrating and storing his/her data into the database. Families of a patient can see clinical data made by hospital and the environment of the sick room of the patent through their computers or mobile phones outside the hospital. Through the system,hospital can provide better medical services to patients and their families.

• Journal of agriculture & life science
• /
• v.45 no.1
• /
• pp.109-117
• /
• 2011

The antioxidant activities of 60% ethanol extracts from different parts (leaf, stem, and root) of Artemisia argyi using an in vitro system were examined to find a possibility as natural antioxidant substances. The highest total phenolics (23.08 mg/g) was obtained by 60% ethanol extract of leaf. The scavenging activity of 60% ethanol extract from different parts of A. argyi on the DPPH and ABTS radical was raised with increasing amount of extracts, and 60% ethanol extract from leaf showed the highest radical scavenging activities. The leaf extract presented the highest reducing power and strong inhibitory effect on autooxidation of linoleic acid. In MDA formation using mouse brain homogenates, the 60% ethanol extracts of A. argyi also exhibited antioxidant activity as inhibition of MDA (71.38% at $200{\mu}g/mL$). Therefore, these results suggest that the 60% ethanol extract of A. argyi leaf possess excellent antioxidant activities and thus it has great potential as a source for natural antioxidant.

• Journal of Environmental Impact Assessment
• /
• v.29 no.6
• /
• pp.403-413
• /
• 2020

A mathematical model comprised with eight simultaneous quasi-linear partial differential equations was suggested to provide optimal chlorination strategy. Upstream weighted finite element method was employed to construct multidimensional numerical code. The code was verified against measured concentrations in three type of reactors. Boundary conditions and reaction rate were calibrated for the sixteen cases of experimental results to regenerate the measured values. Eight reaction rate coefficients were estimated from the modeling result. The reaction rate coefficients were expressed in terms of pH and temperature. Automatic optimal algorithm was invented to estimate the reaction rate coefficients by minimizing the sum of squares of the numerical errors and combined with the model. In order to minimize the concentration of chlorine and pollutants at the final usage sites, a real-time predictive control system is imperative which can predict the water quality variables from the chlorine disinfection process at the water purification plant to the customer by means of a model and operate the disinfection process according to the influent water quality. This model can be used to build such a system in water treatment plants.

• Journal of KIISE:Software and Applications
• /
• v.35 no.6
• /
• pp.392-403
• /
• 2008

User reviews are valuable information that can be used for various purposes. In particular, the product reviews on online shopping sites are important information which can directly affect the purchasing decision of the customers. In this paper, we present our design and implementation of a system for summarizing the customer's opinion and the features of each product by analyzing reviews on a commercial shopping site. During the analysis process, several natural language processing(NLP) techniques and the semantic dictionary were used. The semantic dictionary contains vocabularies that are used to express product features and customer's opinions. And it was constructed in semi-automatic way with the help of the tool we implemented. Furthermore, we discuss how to handle the vocabularies that have different meanings according to the context. We analyzed 1796 reviews about 20 products of 2 categories collected from an actual shopping site and implemented a novel ranking system. We obtained 88.94% for precision and 47.92% for recall on extracting opinion expression, which means our system can be applicable for real use.

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.303-309
• /
• 2018

Computer vision technology is a component inspection to obtain a video image from the camera to the machine to perform the capabilities of the human eye with a field of artificial intelligence, and then analyzed by the algorithm to determine to determine the good and bad of production parts It is widely applied. Shape inspection method was used as how to identify the location of the start point and the end point of the search range, measure the height to the line scan method, in such a manner as to determine the presence or absence of the bolt tabs average brightness of the inspection area in a circular scan type value And the degree of similarity was calculated. The total time it takes to test in the test performance tests of two types of bolts tab enables test 300 min, and demonstrated the accuracy and efficiency of the inspection on the production line represented a complete inspection accuracy.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.527-533
• /
• 2015

This study performed an on-site demonstration of the topographic surveying technique at a large-scale open-pit limestone mine in Korea using a fixed-wing unmanned aerial vehicle (UAV, Drone, SenseFly eBee). 288 sheets of aerial photos were taken by an automatic flight for 30 minutes under conditions of 300 m altitude and 12 m/s speed. Except for 37 aerial photos in which no keypoint was detected, 251 aerial photos were utilized for data processing including correction and matching, then an orthomosaic image and digital surface model with 7 cm grid spacing could be generated. A comparison of the X, Y, Z-coordinates of 4 ground control points measured by differential global positioning system and those determined by fixed-wing UAV photogrammetry revealed that the root mean squared errors were around 15 cm. Because the fixed-wing UAV has relatively longer flight time and larger coverage area than rotary-wing UAVs, it can be effectively utilized in large-scale open-pit mines as a topographic surveying tool.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.9 no.1
• /
• pp.221-240
• /
• 1998

This study concerns information quality of the database which has been produced in the ASKERIC database. The measures used in this study were accuracy of the records. consistency, completeness and currency. Accuracy was measurred in terms of the keywords used in different ways in the US and Britain and the spelling errors in the records. Consistency was measured in terms of 'see also' and 'see reference' mechanism and character capitalization. Completeness was measured as follows： completeness of the search fields in the record and relevance of search fields. Currency was measured using the publication date. The experimental result showed that ERIC databases had some errors in terms of accuracy. consistency. completeness and currency. However, continuous striving for the automatic error checking functions and the policy of feedback from users have contributed to the improvement of the quality in ERIC databases.