• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.529-536
• /
• 2015

A defect could be generated in bolts for a use of oil filters for the manufacturing process and then may affect to the safety and quality in bolts. Also, fine defects may be imbedded in oil filter system. So it is very important that such defects be investigated and screened during the multiple manufacturing processes. Therefore, in order effectively to evaluate the fine defects, the FEM simulations were performed to make characterization in the crack detection of the bolts and the parameters such as number of turns of the coil, the coil size, applied frequency were calculated based on the simulation results. Simulations were carried out for the defect signal of eddy current probe. Exciter and receiver were utilized. In this paper, the FEM simulations were performed in both bobbin-type and pancake-type probe, both probes were optimized under Eddy current FEM simulations and the results of calculation were discussed.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.407-414
• /
• 2007

Using the MPI (Moldflow Plastics Insight) software from Moldflow Co., the optimum conditions for producing the upper part of the automobile air cleaner were obtained for 20% talc filled polypropylene (PP). The analysis was carried out to solve the cracking problem between upper and lower parts and the improved process was proposed using the flow balance. The comparative results between the conventional process, CASE-1, with one-pin gate and the new process (CASE-2) comprising two-pin gate system are the followings. In the case of CASE-2, the shorter filling time and reduced cycle time induced an improved production and processibility. In addition, the orientation and volumetric shrinkage are similar to those observed in the lower part, but the assembly, deformation, and physical characteristics are enhanced. The problem induced by the CASE-1 did not originate from the residual stress, but from the difference in the size of the upper part air cleaner after shrinkage. Thus, the orientation problem was expected to improve by optimizing the gate structure.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.141-149
• /
• 2013

Recently, the time in which children moves by car become frequent, they stay longer in the car because leisure life including camping and etc. increased. Children whose physical activities are active were subject to restriction because of the limited car boarding visual space and on security. Because of limited space in cars, domestic and foreign automotive companies show the different glass roof applied in cars that exhibited wide clear view in order to remove tedious and stuffy of children while they stay for a long time inside the car. In addition, the potential probability in which the Smart Car that the IT technology is grafted research and research that it utilizes the door window glass as the display is progressed and which the glass roof can be used as the screen can be sufficient. In this study, the in-vehicle display application case and Smart Devices constellation application were benchmarked. The car glass roof application method of the constellation studying content which performed the user survey for the child by the car with the parents whose movement is frequent and considers the child and fundamental interaction way tried to be drawn and we try to propose.

• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.113-122
• /
• 2018

In level 3 automated vehicles, drivers are expected to encounter transition of control when the system reaches its limit. Drivers need to refocus their attention on the road ahead and gain situational awareness. Appropriate information should be conveyed during this period in order to prevent human errors. In this paper, we defined the takeover process as 'in-the-middle-of-the-loop' and conducted Task Analysis and Work Domain Analysis to find out information requirements. As a result, we specified required information types and interface considerations. Moreover, we conducted an experimental study to find how the information types affect drivers on situation awareness, cognitive load and reaction time. Consequently, we found different information on system transparency should be conveyed depending on the urgency of takeover situation and driver guidance could help drivers with better situation awareness after the takeover.

• Journal of Biomedical Engineering Research
• /
• v.44 no.2
• /
• pp.157-165
• /
• 2023

The purpose of this study was to evaluate the importance of developing slim seats with ergonomic design to improve seat comfort and expand the interior space. Two seats were used for the experiment: a sample seat designed based on hip shape and spinal alignment and a normal seat with a flat design without curves. Subjects sat in both the sample seat and a normal seat applied to the vehicle simulator and the experiment was conducted. The next part of the experiment was conducted in two different postures: a driving posture and a relaxed posture. The subjects filled out a comfort questionnaire immediately after sitting and after 30 minutes. The results showed that the comfort in the sample seat was found to be more comfortable than the normal seat. However, no significant difference was noted for the relaxation posture. Pressure distribution was also recorded immediately after sitting and after 30 minutes. In the case of pressure distribution, it was confirmed that the pressure in the sample seat was more evenly distributed in both the driving and relaxed postures than in the normal seat. The results showed that the ergonomically designed sample seat greatly improved seating comfort and pressure distribution compared to the normal seat, which is a general vehicle seat design.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.669-679
• /
• 2022

Lithium-ion battery has been used for lots of electronic devices. With the popularization of batteries, researchers have focused on batteries' electrochemical performances by environmental conditions, such as temperature, vibration, shock and charging state. Meanwhile, due to very serious global warming, car companies have started using lithium-ion batteries even in cars, replacing internal combustion engines. However, batteries have been developed based on non-moving systems which is totally different from vehicles. In the line of the differences, researchers have tried to reveal relationship between variables from dynamic systems and batteries. In this review, we discuss the comprehensive effect of vibration and shock on batteries. We firstly summarize vibration profiles and effect of normal vibration on batteries. We also sum up effect of shock and penetration on batteries and introduce how ultrasound influences on batteries. Lastly, outlook for the battery design as well as dynamic design of EVs are discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.137-142
• /
• 2017

Recently, the reduction of vehicle weight has been increasingly studied, in order to enhance the fuel efficiency of passenger cars. In particular, the seat frame is being studied actively, owing to considerations of driver safety from external impact damage. Therefore, this study focuses on high strength steel sheet (SPFC980)/polymer heterojunction hybrid materials, and their performance in regards to impact energy absorption. The ratio of impact energy absorption was observed to be relatively higher in the SPFC980/polymer hybrid materials under the impact load. This was found by calculating the equivalent flexural rigidity, which is the bending effect, according to the Castigliano theorem. An efficient wire-web structure was investigated through the simulation of different wire-web designs such as triangular, rectangular, octagonal, and hexagonal structures. The hexagonal wire-web structure was shown to have the least impact damage, according to the simulations. This study can be utilized for seat frame design for passengers' safety, owing to efficient impact absorption.

• Science of Emotion and Sensibility
• /
• v.10 no.1
• /
• pp.55-68
• /
• 2007

This paper describes a Voice User Interface(VUI) method and a design guideline tool which supports the studies for domestic appliance. This issue covers specification of user requirement and selection of appropriate VUI to represent speech generation. The criteria for paper is interaction design to enhance user engagement. The studies were carried out to measure prototype of domestic appliance such as a refrigerator, a washing machine, a Gimchi refrigerator, an oven range, a dishwasher and an air conditioner. This paper is presented a study of user preferences and suitability. The results of these findings to voice interface design are discussed and it is suggested that VUI guideline and optimal prototyping can provide a useful application tools in the design process.

• Archives of design research
• /
• v.9
• /
• pp.401-418
• /
• 1994

A fairy tale of information by word of mouth gets to this day with admitting the change of period. A fairy tale reflects the morality of the education of children. The late 17th century, the information by an author of classical literature collects and the literature genre of children begins to fix. In 1697, Perrault publicates and is a volume of eight volumes' tale. Perrault describes that female children guard against male by annexing a figurative allusion. Sara Moon of a photography artist in 20th century expresses this theme by symbolic expression of illustration. Her illustration brings about many questions and becomes conscious of the veiled significance of sentences by author's consideration. She deletes the Perrault's preccept in substitution of bed photography and she substitutes a wolf with a car or a dog and a shadow, etc .. The illustration of Sara Moon gets ready a foundation of early sex education as reflecting a period. Now, an illustrator gets to rebirth a fairy tail as a new dramatizer of today.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.399-405
• /
• 2016

Head-Up Display, an information-providing display, is a device that provides necessary information through a vehicle window for a driver when driving, with which the driver secures the visibility and acquires information necessary for driving. Head-up displays in early days were mostly installed in imported vehicles but increasingly, being installed in medium and large-sized domestic vehicles, they secures convenience of driving and information acquirement. The information display element of each of currently released brand cars not only has limits in consistency and in displaying interface but also reveals the limitation of a way to apply GUI, being applied to dot reflective form in terms of the technology type. Accordingly, this study draws real time information element described as necessary during driving through case survey and analysis, and aims to provide a user with new GUI guideline through transparent display technology recently developed based on results analyzed with priority of POI(Point of Interest) information.