• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.8
• /
• pp.725-729
• /
• 2016

The regular inspection of vehicles that are in service in domestic country, i.e., vehicle safety and emission gas inspection have been forced by the korea transportation safety authority and a private servicing enterprise according to the vehicle administration law (1995). In the safety inspection process, which is developed by a compatible inspection system and method, every effort is made to increase the reliability of vehicle safety and the service quality, and to protecting national health. In this study, the reliability of the braking force inspection method in the current regular vehicle inspection was studied statistically by comparing the dynamic braking force inspection method with the static braking force inspection method. Further, the problems and characteristics of the current braking force inspection methods were analyzed. Form the results for the dynamic braking force inspection equipment (H), a mean correction factor (y=18.61+2.18x) was obtained for the axle braking force ratio according to vehicle entering velocity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1065-1066
• /
• 2015

자동차의 수요가 폭발적으로 늘어났으며, 늘어난 자동차 대수를 고려하여 자동차 검사소 또한 많이 늘어났다. 그러나 최근에는 낮은 유지비용과 이동의 편의성으로 인하여 이륜자동차의 수요가 지속적으로 증가하고 있다. 이륜자동차의 경우 검사제도의 미비로 인하여 대기환경오염 및 불법개조로 인한 여러 가지 사회적 문제가 발생하고 있다. 이러한 이유로 최근에는 이륜자동차의 체계적 관리를 통하여 불법개조를 단속하고, 배기가스 오염물질에 의한 대기오염 및 이륜자동차 소음관리를 위하여 이륜자동차에 대한 검사 제도가 더욱 강화되고 있다. 본 논문에서는 중고차 성능점검 시스템 및 기능종합진단 시스템의 아키텍처를 통하여 이륜자동차에 적용되는 종합관리시스템 적용될 수 있는 통신 프로토콜을 분석하고 개발에 필요한 중요한 설계요소를 제시하고자 한다.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.189-195
• /
• 2006

For the past decades, vehicle emissions has been a major source of air pollution in urban areas Vehicle inspection and maintenance (I/M) test programs were developed for major metropolitan areas to reduce urban air pollution. However. there are a few studies of exploring major factors to influence I/M test failure. This study develops a logit model to identify key factors affecting overall test failure, using the vehicle I/M test data from California in October 2002. The model results indicate that vehicle age, odometer reading, engine size, vehicle make, presences of emissions control equipment, and test types have significant effects on the probability of I/M test failure.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.65-74
• /
• 2007

Vehicle inspection is a system to help all vehicles function safely through periodic maintenance. Vehicle inspections have been performed since 1962 in Korea by the government in order to reduce traffic accidents due to vehicle defects. Also, vehicle inspections may help protect citizens against uninsured vehicles and illegal vehicle remodeling by discovering and disclosing those vehicles. The prime objective of vehicle inspection is to guarantee all vehicles drive safely on the road by inspecting and fixing items which can affect traffic accidents. In addition, vehicle inspections may help to improve the public order related to vehicle operations and prevent crime through the confirmation of vehicle identity and authentication of ownership. Although there are many benefits of vehicle inspection. there are some negative opinions of the system. In this study, a methodology to analyze the effectiveness of the vehicle inspection system quantitatively in terms of traffic safety was developed. According to the developed methodology. accidents were reduced by 23.735, which is 11% of the total number of accidents in 2005.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.544-545
• /
• 2015

오늘날 자동차에서 배출되는 유해 가스로 인한 지구 온난화를 막기 위하여 많은 환경규제를 받고 있다. 때문에 대부분의 국가들은 출시되는 자동차나 운행 중인 자동차에 대하여 배출가스 검사를 의무적으로 실시하여 배출가스에 의한 대기오염을 줄일 수 있도록 법제화하고 있다. 본 논문에서는 "배출가스 검사/진단시스템" 개발에 대한 고찰을 통하여 배출가스, RPM, 소음을 측정할 수 있는 MCU(micro controller unit) 기반의 데이터 계측기에 대한 설계방안을 제시하고자 한다. 또한, MCU를 기반으로 배출가스(HC, CO, CO2 등) 데이터 확보를 위한 광학 필터처리 기술 및 신호처리 알고리즘을 검토하였다. 자동차의 RPM을 측정할 수 있는 알고리즘에 대한 검토와 배출가스 및 소음을 측정할 수 있는 알고리즘을 개발하여 RS-485, TCP/IP 기반으로 데이터를 전송할 수 있는 배출가스 검사시스템을 제시하고자 한다.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.1
• /
• pp.42-48
• /
• 2024

With a sustained increase in the number of reported registrations for two-wheeled vehicles and the simultaneous growth of the domestic two-wheeled vehicle market, fueled by the activation of contactless industries and a rising population engaging in recreational two-wheeled vehicles during the COVID-19 era, concerns regarding safety incidents and environmental issues have come to the forefront. While the regular inspection methods and environmental standards for four-wheeled vehicles are becoming more stringent for safety and environmental management, the same cannot be said for two-wheeled vehicles. As the market for two-wheeled vehicles continues to expand, there is a pressing need for improvements in the management and inspection of these vehicles. In this study, we analyze cases of non-compliance from the results of periodic inspections over the past five years, specifically focusing on illegal customizations, exhaust emissions testing, and exhaust noise results. Through this analysis, we elucidate the necessity for enhancing the inspection system for two-wheeled vehicles, drawing parallels with the inspection systems applied to conventional automobiles. The findings of this research contribute to advocating for improvements in the inspection regime for two-wheeled vehicles, addressing the growing concerns related to safety and environmental impact.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.127-132
• /
• 2019

In this paper, we propose a visual inspection method of automotive parts for injection molding to improve the appearance quality and productivity of automotive parts. Exterior inspection of existing injection molding automobile parts was generally done by manual sampling inspection by human. First, we applied the edge-tolerance vision inspection algorithm ([1] - [4]) for vision inspection of electronic components (TFT-LCD and PCB) And we propose a new visual inspection method to overcome the problem. In the proposed visual inspection, the inspection images of the parts to be inspected are aligned on the basis of the reference image of good quality. Then, after partial adaptive binarization, the binary block matching algorithm is used to compare the good binary image and the test binary image. We verified the effectiveness of the edge-tolerance vision check algorithm and the proposed appearance vision test method through various comparative experiments using actual developed equipment.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.04a
• /
• pp.458-461
• /
• 2000

알루미늄 자동차 엔진은 알루미늄 엔진 블록에 라이너가 삽입되어 접합된다. 접합시 라이너와 엔지 블록의 간격이 5$mu extrm{m}$이내이어야 하며 접합률이 30% 이상이면 접합상태가 양호하다고 한다. 라이너의 접합상태를 검사할 수 있는 비파괴 검사장비는 국내에서 개발되어 상용화된 것이 거의 없는 상황이다. 6개의 라이너의 접합상태를 자동으로 검사하는 컴퓨터 내장형 초음파 검사 시스템을 개발하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.211-212
• /
• 2001

자동차 생산공정은 일반적으로 프레스, 차체, 도장, 의장으로 구분되어 진다. 특히 차량의 조립 완성 후 엔진과 하부 샤시를 검사하는 Test 라인 공정에서는 차량운전 상태에서만 검사를 실시하는 작업특성 때문에 자동차 배기가스가 실내환경 오염을 유발하고 있다. 그래서 대부분 자동차 공장의 경우 배출가스에 대한 제어방식 및 배기 유량 부족으로 자동차 생산을 위하여 실내에서 작업하는 근로자들에게 두통 및 호흡기질환이 유발되고 있다. (중략)

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.42-49
• /
• 2021

In this paper, we proposes a study on the derivation of inspection factors for the periodic inspection of large buses equipped with AEBS and LDWS. we investigate the safety evaluation (NCAP) of domestic and foreign vehicles and safety standards for the two functions currently in operation and analyze the evaluation factors, measurement methods and evaluation scenarios and so on. In addition, the test scenario was derived by analyzing the vehicle safety evaluation data already held, Therefore, we use an real large bus and the inspection elements for the periodic inspection were derived.