• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.8-16
• /
• 1993

Auto-Pilot System uses heading angle information via the position sensor and the rudder device to control the ship direction. Most of the control logics are composed of the state estimation and control algorithms assuming that the measurement device and the actuator have no fault except the measurement noise. But such asumptions could bring the danger in real situation. For example, if the heading angle measuring device is out of order the control action based on those false position information could bring serious safety problem. In this study, the control system including improved method for processing the position information is applied to the Auto-Pilot System. To show the difference between general state estimator and F.D.F., BJDFs for the sensor and the actuator failure detection are designed and the performance are tested. And it is shown that bias error in sensor could be detected by state-augmented estimator. So the residual confined in the 2-dim in the presence of the sensor failure could be unidirectional in output space and bias sensor error is much easier to be detected.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.50-57
• /
• 2005

This paper describes an expert system for soldiers psychology diagnosis. In the field warfare, platoon leaders or company commanders have to diagnose his soldier's condition correctly. The expert systems, a field of artificial intelligence, can be appropriate approach for ill-structured paradigm. This use an UNIK system. This UNIK system is composed of UNIK-FRAME, UNIK-BWD, UNIK-WBI, UNIK-INDUCE and UNIK-Interface. Especially, UNIK-WBI system is very useful to display soldiers psychology diagnosis and so easy to use it. Any leader or commander can easily do this. This paper data is based on DSMIV. Through This expert system, combat power can be kept and accidents be protected.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.564-568
• /
• 2005

As functional requirements of automatic office machines like printers, ATMs, copying machines are on a trend for the higher speed and precision, extensive technical advances are being developed and implemented in the industry. Media transport system is a device to convey a sheet of paper in ATMs and printers. The stability of media transport system is a matter of concern as their operating throughput rapidly increases. And defects of belts or rollers in a transport system directly affect the level of stability of the system. Therefore an automatic diagnostic system for predicting various defects is necessary for the stable operation of the media transport system. A simulation based on multi-body dynamics has been done for a feasibility study of a system design for the defect anticipation.

• The Journal of Information Technology
• /
• v.2 no.2
• /
• pp.13-22
• /
• 1999

In this paper, we purpose automatic diagnosis in online, as the fundamental study to diagnose the partial discharge mechanism and to predict the lifetime by introduction a neural network. In the proposed method, we use AE(acoustic emission) sensing system and calculate a quantitative statistic parameter by pulse number and amplitude. Using statically parameters such as the center of gravity(G) and the gradient if the discharge distribute(C), we analyzed the early stage and the middle stage. the quantitative statistic parameters are learned by a neural network. The diagnosis of insulation degradation and a lifetime prediction by the early stage time are achieved. On the basis of revealed excellent diagnosis ability through the neural network learning for the patterns during degradation, it was proved that the neural network is appropriate for degradation diagnosis and lifetime prediction in partial discharge.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.70-77
• /
• 2023

Fine dust is a cause of serious ecological problems, and fugitive dust generated from construction sites is a major source of fine dust in Korea. However, at construction sites, including concrete manufacturing industry sites, measurements are rarely made at the fugitive dust generation stage, and passive removal methods are the majority. Therefore, in this study, a fugitive dust measurement method suitable for managing fugitive dust generated during aggregate unloading in the concrete manufacturing industry sites was selected. In addition, the purpose was to analyze the amount of fugitive dust reduction according to the operation of the reduction system by applying the automatic fugitive dust reduction system to the aggregate unloading site. As a result, the reliability of the light scattering method was secured through the comparative measurement of the beta-ray absorption method and the light scattering method, and the light scattering method correction coefficient was calculated and applied to the measured value of the fugitive dust particle mass concentration at the concrete manufacturing industry sites. In addition, the fugitive dust reduction rate according to the operation of the automatic fugitive dust reduction system was derived.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1985-1986
• /
• 2008

혀의 상태는 인체 내부의 생리적 병리적 특성의 변화를 나타내므로, 한의학에서 중요한 지수가 된다. 한의학에서 설진 방법은 환자의 설질과 설태의 변화를 관찰함으로써 질병을 진찰하는 방법이므로, 편리할 뿐만 아니라 비침습적이고, 널리 쓰이고 있다. 그러나 설진은 광원, 환자의 자세, 한의사의 상태와 같은 검사 환경에 의해 영향을 받는다. 표준화된 진단을 위한 자동 진단 시스템을 개발하기 위하여 질병의 예후를 판단할 수 있는 설태 분류 방법은 필수적이지만, 컬러의 경계가 모호하므로 설태와 설질을 구분하기는 매우 어렵다. 이 논문에서 분할된 설체 내에서 컬러를 계층적으로 분류하여 설태를 분류하는 방법을 제안한다. 또한 설태 영역을 정확하게 분할하도록 하였다. 제안된 방법은 표준화된 진단을 가능하도록 한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.495-502
• /
• 2006

A fault diagnosis method is developed in this study using automaton through quantization of vibration signals for normal and faulty conditions, respectively. Automaton is a kind of qualitative model which describes the system behaviour at the level of abstraction. The system behavior was extracted from the probability of the output sequence of vibration signals. The sequence was made as vibration levels by reconstructing the originally measured vibration signals. As an example, a fault diagnosis for the bearing of ATM machine was done, which detected the bearing fault with confident level compared to any other existing methods of kurtosis or spectrum analysis.

• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.31-34
• /
• 2007

회복전압 측정법(RVM: Recovery voltage measurement)은 최근 유럽지역에서 활발히 연구 진행되고 있는 절연 진단 기법 중의 하나로 소개된바 있으며, 오일과 절연지 사이에 스며든 수분량을 검출할 수 있는 진단 시스템기법이다. 변압기 내부의 절연물질에 대한 분극특성을 분석함으로서 열화진행정도 및 열화정도를 진단하는데 활용될 수 있다. 본 논문은 국산화의 일환으로 전기계측제어용 LabVIEW 프로그램을 활용하여 RVM 전 과정을 자동으로 사용할 수 있도록 자체 제작한 프로그램을 소개하고자 한다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.133-136
• /
• 2000

에너지 차분 흥부 X선 화상으로부터 폐종류 음영을 검출하기 위한 필터를 예측해서 전문의의 진단보조 혹은 총합자동진단시스템의 구성 요소로서 필터가 발휘한 역할을 고려한 후, 구체적인 성능 평가 방법을 제안한다. 필터의 성능을 평가할 때 문턱값을 변화시킨 경우, 못보고 빠트린 비율과 잘못 본 비율의 변화를 ROC 곡선으로 나타내어 이것에 기초한 판단을 행하는 접근방법이 있다. 본 연구에서는 이와같은 평가에 대한 구체적인 예를 통하여 문제점을 명확히 하여 그 평가기준을 마련한다. 성능 평가를 행하기 위해 이용된 에너지 차분화상으로서, 임상 데이터 14개의 증예를 이용한다. 즉, 총 종류수 32개 한 개의 증예에 있어서 종류의 개수는 1~8개로 평균 2개, 1mm 당 샘플링 간격 5 픽셀, 비트 분해능 10 bit의 저압화상으로, 그 크기는 1760$\times$1760이다. 계산기 하드웨어의 제약으로부터 원화상을 가우스 함수로 평활화 해서 1/8로 축소한 화상으로 실험을 행한다. 상기 평가 절차에 따라, 이전에 개발된 다중해상도 ∇$^2$G 필터의 성능을 평가하고, 단일해상도 ∇$^2$G 필터와의 비교를 통해 그 성능이 우수함을 확인한다. 본 평가 방법은 화상진단 지원용 필터의 평가에 대해서 적용될 수 있을 것이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.497-502
• /
• 2014

In general, all physicians have some standardized diagnosis and treatment methods. However, there are differences in the precise order and examination depending on the hospital size, system, medical equipment, etc. To reduce this difference, the interest about standardized guidelines recently increased and a variety of research is being conducted. The uniform guideline cannot reflect the differences of each situation and environment to meet the hospitals. Therefore, standardized medical guidelines(=clinical pathway) should provide customized guidelines based on the relevant medical data to ensure the quality of the medical service and the doctor's autonomy. In this paper, we will analyze medical data made by two thyroid specialists in the same hospitals. Moreover, this paper mentions the implement of automatic generating clinical pathway system which consider its real hospital situation and result.