Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Environmental Maintenance Technology for Concrete Manufacturing Industry by Using an Automatic Fugitive Dust Reduction System

비산먼지 자동 저감시스템을 이용한 콘크리트 제조업 환경 유지관리 기술

  • 조현우 (한국건설생활환경시험연구원 스마트건설재료센터) ;
  • 정윤석 (한국건설생활환경시험연구원) ;
  • 류득현 (유진기업(주) 기술연구소) ;
  • 김윤용 (충남대학교 토목공학과)
  • Received : 2023.07.20
  • Accepted : 2023.08.01
  • Published : 2023.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Fine dust is a cause of serious ecological problems, and fugitive dust generated from construction sites is a major source of fine dust in Korea. However, at construction sites, including concrete manufacturing industry sites, measurements are rarely made at the fugitive dust generation stage, and passive removal methods are the majority. Therefore, in this study, a fugitive dust measurement method suitable for managing fugitive dust generated during aggregate unloading in the concrete manufacturing industry sites was selected. In addition, the purpose was to analyze the amount of fugitive dust reduction according to the operation of the reduction system by applying the automatic fugitive dust reduction system to the aggregate unloading site. As a result, the reliability of the light scattering method was secured through the comparative measurement of the beta-ray absorption method and the light scattering method, and the light scattering method correction coefficient was calculated and applied to the measured value of the fugitive dust particle mass concentration at the concrete manufacturing industry sites. In addition, the fugitive dust reduction rate according to the operation of the automatic fugitive dust reduction system was derived.

미세먼지는 생태학적으로 심각한 문제를 발생시키는 원인이고, 건설현장에서 발생되는 비산먼지는 국내 미세먼지의 주요 발생 원인이다. 그러나 콘크리트 제조업 현장을 포함한 건설 현장에서는 비산먼지 발생단계에서 측정은 거의 이루어지지 않고 있으며, 수동적인 제거방안들이 대부분인 실정이다. 따라서, 본 연구에서는 콘크리트 제조업에서 골재 하역시 발생하는 비산먼지를 발생단계에서 관리하기 적합한 비산먼지 측정 방법을 선정하고, 자동 비산먼지 저감시스템을 골재 하역장에 적용하여 저감시스템 작동 여부에 따른 비산먼지 저감량을 분석하는 것을 목적으로 하였다. 결과적으로, 베타선흡수법과 광산란법의 비교측정을 통하여 광산란법의 신뢰성을 확보하였고, 광산란법 보정계수를 산출하여 콘크리트 제조업 현장 비산먼지 질량농도 측정값에 적용하였다. 또한, 자동 비산먼지 저감시스템 작동 여부에 따른 비산먼지 저감률을 도출하였다.

Keywords

Acknowledgement

본 연구는 국토교통부 도로기술연구사업 "도로 미세먼지 저감 기술 개발 및 실증연구(22POQW-B152342-04(기관과제번호))"에 의해 수행하였다.

References

  1. Fugitive dust management manual (2021), Ministry of Environment, 33-37 (in Korean).
  2. What is fine dust? (2016), Ministry of Environment, 5-12 (in Korean).
  3. SPS-I KEAA 24-7236 (2018), Methods for measurement and analysis of particulate matters at around a thermal power plant using light scattering method, Korea Engergy Applications Industry Assiciation (in Korean).
  4. Choi, S. I., An, J. E., and Jo, Y. M. (2018), Review of Analysis Principle of Fine Dust, Korean Industrial Chemistry News, 21(2), 16-23 (in Korean).
  5. Kim, S. J., Son, Y. K., Kim, J. C., and Kim, I. W. (2009), Compensation of Particle Matter Measurement by Light Scattering Method, Korean Society for Atmospheric Environment, 26(5), 613-615 (in Korean). https://doi.org/10.5572/KOSAE.2010.26.5.533
  6. Han, S. H., Baek, C. M., Yang, S. L., and Lee, J. W. (2020), Measurement and analysis of fugitive dust emission concentration for small-scale excavation construction, Journal of Korean Society of Road Engineers, 22(6), 61-68 (in Korean). https://doi.org/10.7855/IJHE.2020.22.6.061
  7. Kim, K. T. (2019), Fine Dust Monitoring and Removal Method in Urban Construction Sites Using Autonomous Mobile Vehicle and Dry Fog System, Ecology and Resilient Infrastructure, 6(4), 277-286 (in Korean). https://doi.org/10.17820/ERI.2019.6.4.277
  8. Youn, J. S., and Han, S. (2017), Comparison of Measurement Methods and Size Fraction of Fine Particles (PM10, PM2.5) from Stationary Emission Source Using Korean Standard and ISO: Coal Power Plant and Refinery, Journal of Korean Society for Atmospheric Environment, 33(4), 342-350 (in Korean). https://doi.org/10.5572/KOSAE.2017.33.4.342
  9. Cho, H. W., Shin, H. C., and Jung, Y. S. (2022), A Study on the Tendency of Fugitive Dust for Environmental Maintenance at the Aggregate Unloading Site of Ready-mixed Concrete Plants, Journal of the Korea Institute for Structural Maintenance and Inspection, 26(5), 103-111 (in Korean). https://doi.org/10.11112/JKSMI.2022.26.5.103
  10. Park, T. H., Ban, J. H., Lee, T. H., Lee, J. W., Lee, S. H., and Park, H. M. (2020), Preliminary Study on Small-Scale Environment Chambers for Simulating Formation of Fine Particulate Matter at Roadsides, Journal of Korean Society of Road Engineers, 22(5), 25-35 (in Korean). https://doi.org/10.7855/IJHE.2020.22.5.025
  11. Hong, S. J., Yoo, H. J., Yeon, G. M., and Kim, I. T. (2020), Fundamental study on the estimation of resuspended road dust in urban areas, Ournal of Korean Society of Road Engineers, 22(2), 41-51 (in Korean). https://doi.org/10.7855/IJHE.2020.22.2.041
  12. Lee, S. H. Lee, J. W., Park, K. S., Lee, S. H., and Park, H. M. (2020), Statistical Analysis of Characteristics of Fine Particulate Matter Concentrations Considering Weather Conditions, Journal of Korean Society of Road Engineers, 22(5), 37-45 (in Korean). https://doi.org/10.7855/IJHE.2020.22.5.037
  13. Cho, J. G., and Park, H. K. (2021), A Study on the Reduction Plan of Dust Dispersion at Small-Scale Construction Sites in Downtown Seoul, KSCE Journal of Civil and Environmental Engineering Research, 41(6), 745-750 (in Korean). https://doi.org/10.12652/KSCE.2021.41.6.0745