• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.573-583
• /
• 2005

Fugitive dust, which is emitted in the ambient air without first passing through a stack or duct designed to control flow, is frequently generated by means of wind erosion from storage yards at Pohang Steel Wokrs. The size distribution of fugitive dust is mostly in the range of coarse particulate which is deposited as soon as emitted and less harm to human health; however $20\%$ of fugitive dust contains PM 10 known as one of most harmful airborne pollutant. Consequently, effective control and reduction of fugitive dust is strongly requested by the local society, but it is not easy so far because the generation and dispersion of fugitive dust highly depends on meteorological conditions, and it being occurred for irregularity. This research presented a fugitive dust control system for each meteorological condition by providing statistical prediction data obtained from a statistical analysis on the probability of generating the threshold velocity at which the fugitive dust begins to occur, and the frequency occurring by season and by time of the wind direction that can generate atmospheric pollution when the dispersed dust spreads to adjacent residential areas. The research also built a fugitive dust detection system which monitors the weather conditions surrounding storage yards and the changes in air quality on a real-time basis and issues a warning message by identifying a situation where the fugitive dust disperses outside the site boundary line so that appropriate measures can be taken on a timely basis. Furthermore, in respect to the spraying of water to prevent the generation of fugitive dust from the storage piles at the storage yard, an advanced statistical meteorological analysis on the weather conditions in Pohang area and a case study of fugitive dust dispersion toward outside of working field during $2002\∼2003$ were carried out in order to decide an optimal water-spraying time and the number of spraying that can prevent the origin of fugitive dust emission. The results of this research are expected to create extremely significant effects in improving surrounding environment through actual reduction of the fugitive dust produced from the storage yard of Pohang Steel Works by providing a high-tech warning system capable of constantly monitoring the leakage of fugitive dust and water-spray guidance that can maximize the water-spraying effects.

• 한국건설관리학회논문집
• /
• 제18권5호
• /
• pp.68-76
• /
• 2017

최근 이슈가 되고 있는 미세먼지(fine dust)는 직경이 $10{\mu}g/m^3$이하인 미립자물질(particulate matter)로서, 흡입 시 인체에 치명적인 악영향을 주는 오염물질로 분류되어 있다. 미세먼지가 바람에 날려 비산할 때 주변에 끼치는 악영향이 증가하므로, 이러한 비산먼지(fugitive dust)를 잘 통제해야 한다. 특히 건설업은 한국에서 가장 비산먼지를 많이 배출하는 사업 분야이므로, 건설현장에서 배출되는 비산먼지를 잘 관리하는 것이 국내 미세먼지의 문제를 해결하는 중요사안이 될 수 있다. 그러나 현재 국내의 비산먼지 관련 민원 수중 건설업이 가장 큰 비율을 차지하고 있는 실태로 보아, 국내의 건설현장 비산먼지 배출에 대한 제도적인 관리에 대한 점검이 필요하다. 이에 본 논문에서는 국내외 주요도시별 건설현장에 적용되는 비산먼지 규정을 비교분석한 뒤, 도출한 개선안을 제안하여 국내 건설현장 비산먼지의 제도적 관리에 일조하고자 한다.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1237-1242
• /
• 2022

대기오염물질인 미세먼지의 50% 이상을 차지하고 있는 비산먼지는 건설공사가 주요 배출원(29.5%)으로 이에 대한 관리를 위하여 비산먼지 억제를 위한 시설 설치 및 조치에 관한 기준을 법으로 제시하고 있다. 그러나 소규모 건설현장은 관리 대상기준이 아니며 건설현장에서 발생하는 비산먼지를 개량적으로 측정하여 조치하는 항목이 미흡하다. 본 논문에서는 비산먼지를 더욱 쉽게 측정하고 모니터링하기 위하여 먼지의 혼탁도를 측정하는 광학기법을 사용한 방법을 설계하고 구현하였다. 먼저 광학기법을 이용한 비산먼지의 혼탁도를 측정하는 방법을 제시하고 비산먼지측정 시스템을 구현하여 건설현장에서 발생하는 실제 비산먼지의 혼탁도를 측정하였다.

• 환경영향평가
• /
• 제9권4호
• /
• pp.257-269
• /
• 2000

This study is to investigate the methodology and applicability on emission control by both MECHANICAL Model and Fugitive Dust Model (FDM) through the comparison of field measurement data and calculated data. Comparing to the method of AP-42 emission fector on the production of flying dust the MECHANICAL Model was proved to be more applicable to the calculation emission rate on the various dust emission conditions on a unpaved road. The seperate calculation on annual mean emission amount and a 24working hours amount was undertaken for the easy management of fugitive dust. Dust concentration predicted by FDM is similar with a measurement value.

• 한국대기환경학회지
• /
• 제20권2호
• /
• pp.263-276
• /
• 2004

According to the annual emission estimates of U.S.A., fugitive dust, the particulate matter entrained in the ambient air which is caused from man-made or natural activities such as movement of soil, vehicles, equipments and windblown dust, contributes 90% of PM$_{10}$ emission. In spite of an importance of fugitive dust emission in PM$_{10}$ estimation, it is excluded in the national emission inventory of Korea so far. In this paper, an emission inventory of fugitive dust for each region and in major cities throughout the country, which is the first time in Korea these values have been compiled, is presented. Sources of fugitive dust emission have been classified into paved/unpaved roads, construction operations, agricultural operations, and natural sources. The emission factors of the existing fugitive dust emission were reassessed in a way that significantly improved the reliability of the estimated result. The Korea's first national emission inventory of fugitive dust by administrative districts proposed in this paper would provide scientific reference data for establishing an reduction strategy of PM$_{10}$ and preparing effective control measures, and would contribute to academic achievement in the atmospheric environments field and the establishment of CAPSS (Clean Air Policy Support System).stem).

• 환경영향평가
• /
• 제15권4호
• /
• pp.237-247
• /
• 2006

In case of studied area located around the sea, the data measured from the regional meteorological office is highly different from the local weather data because the diffusivity of fugitive dust varies considerably with meteorological conditions. Especially, it is very difficult to predict the amount of fugitive dust accurately as wind speed remains high frequently. In this study, the fluxes of suspended particulates as a function of the friction velocity were applied to consider the effect of wind speed on the amount of fugitive dust generated from the reclamation site. The amount of fugitive dust estimated as mentioned above was simulated by using ISCST3 model. As a result, in case of using only the Fugitive Dust Formula which is usually used in Environment Impact Assessment, the predicted $PM_{10}$ concentrations with points were $43.4{\sim}67.8{\mu}g/m^3$. However, in case of applying to the flux of suspended particulates, the predicted values of $PM_{10}$ with points were $43.3{\sim}69.1{\mu}g/m^3$, $49.5{\sim}90.4{\mu}g/m^3$ and $76.0{\sim}182.6{\mu}g/m^3$ with the wind speeds of 4.4, 5.8 and 7.7m/s, respectively. It could be possible to predict the amount of fugitive dust accurately because these predicted values were similar to the measured values. Consequently, we can establish alternatives for reduction of fugitive dust in this area damaged by fugitive dust which is caused by wind.

• 대한토목학회논문집
• /
• 제41권6호
• /
• pp.745-750
• /
• 2021

최근 미세먼지에 대한 국민들의 불안감이 증가함에 비산먼지에 대한 관심이 증가하고 있다. 비산먼지는 도로재비산먼지 다음으로 건설현장에서 많이 발생하는데 이 중 대부분을 차지하는 소규모 현장은 비산먼지 관련 규정이 없어 제대로 된 관리가 이뤄지지 않고 있는 실정이다. 이에 본 연구에서는 소규모 현장 비산먼지 관리 규정 수립에 기여하고 비산먼지 저감방안을 마련하고자 서울시 소규모 현장에서 발생하는 비산먼지를 측정 및 분석을 진행했다. 소규모 현장에서 발생하는 비산먼지의 시간별 변동을 확인했고 담장과 난간 뒤에서 측정했을 때 상대적으로 농도가 낮은 것을 통해 비산먼지 저감방안으로 간이 펜스 설치 방안을 제시했다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E4호
• /
• pp.145-155
• /
• 2001

Simple mass balance method was developed to estimate the contribution of two major fugitive dust sources in the Port of Incheon to a nearby residential area in this study. Using the relatively small number of TSP data as well as the data on mass fraction of Fe and organic materials in the sampled dust, our simplified method demonstrated its ability to estimate the contribution of each fugitive source to a specific location including the residential area with relatively reasonable accuracy. It is clear from this simple method can be applied to the situation where two major fugitive dust sources are responsible for the high TSP concentration around the source area and there are clear marker chemicals representing the characteristics of the fugitive dust sources.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.297-300
• /
• 2017

Particulate Matter(PM) is one of the most critical pollutant which can cause a fatal disease if the human body inhales. Construction is the business that emits the most fugitive dust. It is therefore necessary to manage construction site. South korea government focuses on the fugitive dust control measures defined in regulation being implemented properly. However the number of civil complaints related to fugitive dust emitted from construction site is the most in korea. So it is necessary to check from the management system aspect. This paper compares and analyzes the fugitive dust management system which applied to the construction site of major cities in three countries, and finds out what needs to be supplemented by the domestic management system.

• 한국환경보건학회지
• /
• 제35권4호
• /
• pp.304-314
• /
• 2009

A new harbor as been constructing in Gadukdo. However, a lot of fugitive dust gas been often generated from construction site reclaiming sea sand, especially when the Northwester is blown strongly. It has resulted insome appeals of residents in Gadukdo. In this study, we estimated the amount of fugitive dust caused by new harbor construction using Fugitive dust formula. Also, the concentration of PM10 for recipient is predicted by AERMOD. The amount of fugitive dust is 26.56 ${\mu}g/sec{\cdot}m^2$ and 11.84 ${\mu}g/sec{\cdot}m^2$ respectively by the Fugitive dust formula. PM10 outlet concentration and the amount of fugitive dust increase according to wind velocity and directions. AERMOD is performed on the basis of weather data and the amount of fugitive dust generated with wind velocity. As a result of AERMOD, the PM10 concentration of Sunchang and Oinul are predicted over 100 ${\mu}g/m^3$. The PM10 concentration of Sunchang and Oinul are predicted over 130 ${\mu}g/m^3$ when wind velocity of northwester in winter is over 11 m/s (Air Quality for Particulate Matter (100 ${\mu}g/m^3$ for 24 hours)). Also, the measured error between AERMOD and actual measurement is lower than 5%.