• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.421-426
• /
• 2011

This research was accomplished to assess dose effects on image quality at computed radiography (CR). The ultimate target of the research was finding optimized exposure that provides necessary image quality for the clinical chest diagnosis. Modulation transfer function (MTF), normalized noise power spectrum (NNPS), and Noise equivalent quanta (NEQ) corresponding to the different doses were measured for the assessment of image quality. The preparation of "edge test device" used in MTF measurement and experimental geometry setup were followed by the recommendations of International Electrotechnical Commission (IEC). The experimental results show the necessary image quality can be achieved even at a half of the automatic exposure control (AEC) setting dose for chest diagnosis. It means that the patient exposure can be reduced dramatically by using optimized dose.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2002.11a
• /
• pp.274-278
• /
• 2002

노동 집약적이던 농업은 급속한 기계화로 인하여 노동력의 절감은 여러 분야에서 이루어지고 있지만, 농업은 수익성이 높지 않아 여전히 사람들이 노동을 기피하는 산업중의 하나이다. 온실 자동화는 특용 작물 등의 고부가가치 상품을 중심으로 발전하고있다. 대부분의 기계 및 공정은 점차적으로 무인자동화로 발전되고 있으며, 작업의 편리성을 강조하고 있다. 앞으로의 농업기계는 무인자동화 시스템의 도입으로 인하여 누구나 손쉽게 작업설정을 하고 기계 스스로 원활하게 작업을 수행할 수 있도록 개선되어야 한다. (중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.08a
• /
• pp.41-46
• /
• 2002

본 논문은 냉, 난방 디지털 온도 조절계(SPC 50)의 Etl의 편차 정 동작에 관한 구현장치 제작과 비례 미.적분기가 At 및 비 At기능에서 설정온도를 $100^{\circ}C$를 유지하는데 기인된 전압전류 및 전력데이터 획득의 요인과 비례미적분 정수 및 노 개선점을 연구하였다. 설정온도를 유지하는 온도변화는 At기능에서 $96.7^{\circ}C\sim102^{\circ}C$ 이며, 비At 기능에서는 $97.6^{\circ}C\sim100.2^{\circ}C$이었다. 온도유지 전압변동은 At기능에서 2V~217V이며, 비 At기능에서 20V~217V 이었다. At와 비 At 기능에서 설정온도 $100^{\circ}C$을 유지하는데 온도를 냉각시키는 환풍기가 온. 오프 되는 시간차는 20초 정도 발생하였다. 온도차 및 전압차는 두 기능간에 비례 미. 적분값 설정이 자동 및 수동이냐에 따라서 차이를 보여주었다. 두 기능에서 설정된 온도값 유지에 따른 전압전류의 승압과 하강의 변동된 변환 데이터는 설정된 온도가 성취되어지는 시간차 및 설정값 유지의 특성을 요인으로 한 PID값과 노의 개선점에 길잡이가 된다.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.105-109
• /
• 2020

This study was conducted to the improvement of solar light-based artificial light supply system and effect of lettuce cultivation. The artificial light supply system was consisted of units such as light source, power, system measurement and controller. The light source supply was composed of a solar transmitter and an LED lamp. The power supply consisted of an leakage breaker, SMPS, LED controller and relay. The solar transmitter was made of a quartz optical fiber with optimal light transmission. Artificial light used white lamp among LEDs. System measurement and control consisted of touch screen, Zigbee communication module and light quantity sensor. The results of test confirmed that the LED light is automatically activated when the intensity measured by the light intensity sensor is 200 μmolm^-2s^-1 or less. Moreover, the leaf length, root length, chlorophyll content and root fresh weight of optical fiber treatment was hight than LED lamp treatment. Therefore, it can be inferred that the energy-saving solar light collector device can be effective in the indoor lettuce production. However, the use of LED lamp is also recommended to assure the availability of sufficient sunlight in cloudy and rainy days.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.37.1-37.1
• /
• 2010

망원경을 사용하여 천체를 관측할 때, 관측할 천체가 있는 위치로 망원경을 정확히 구동하여야 하고, 관측하는 시간 동안 충분히 정확히 추적하여야 한다. 그러나, 망원경은 다양한 재질의 많은 종류의 기계적인 부품들을 조립하여 만들어져 있기에, 필연적으로 기계적인 오차를 가지고 있다. 망원경 구동제어 장치는 수학 연산과 다양한 펄스 특성에 기인한 제어 오차를 가지고 있다. 그리고, 영상을 획득하는 부분은 시간 지연과 상의 왜곡이나 전자적인 잡음의 영향을 받는다. 또한, 바람이나 진동 등 예기치 않은 외부적인 요인에 의한 오차가 유발되기도 한다. 이러한 다양한 요인들로 인하여, 망원경이 천체를 정확히 찾아가고 추적하는 것을 어렵게 만든다. 우리는 자동제어공학에서 사용하는 제어해석 기법을 사용하여 망원경 제어 모형을 만들어 나가고자 한다. 특정 망원경에 있어, 오차 유발에 어느 요인이 가장 큰 영향을 주는지, 또한, 어떤 특성을 조절하고, 어느 정도의 제어 시간 간격을 주어야 하는지 등, 추적오차에 주는 영향들을 정량적으로 분석하고 제어에 반영하여 가장 최적의 제어를 할 수 있도록 하고자 한다. 그 첫번째 시도로, 김해천문대 독일식 적도의 방식 200mm 망원경과 이전 연구에서 개발한 PLC 기반의 망원경 제어 장치(강용우 외, 2008) 및 AP8 CCD 카메라를 사용하여, 지향 및 추적 관측 실험을 하였다. 그 결과를 분석하여 경험적 제어 모형을 만들고, 그 해석을 수행한 내용을 소개하고자 한다.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.777-782
• /
• 1995

The scale up production test for the hydrothermal synthesis of clay mineral from the anorthite, which is distributed in San Chung-District of Korea and called as the ground rock for halloysite-kaolin, has been investigated by using the gaitator type reactor. The automatic control system has been developed and applied for the more effective producibility and the reduction in the defect of this intermittent batch processing property, and finally for the feasibility of this system in actual use. It was observed that this agitator type reactor can reduce the synthesis reaction tme from 5 days to 3 days, only with the condition of 20rpm. The automatic control system could regulate the vessel temperature and pressure precisely at an optimum condition during the treatment. Therefore, from these test results the application-possibility for this system was found to be feasible in actual use.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.2
• /
• pp.15-19
• /
• 2022

Purpose [⁶⁸Ga]PSMA-11 is needed the high reproducibility, excellent radiochemical yield and purity. In term of radiation safety, the radiation exposure of operator for its production also should be considered. In this work, we performed a comparative study for the fully automated synthesis of [⁶⁸Ga]PSMA-11 between non-cassette type and cassette type. Materials and Methods Two different type of modules (TRACERlab FX N pro for non-cassette type and BIKBox for cassette type) were used for the automated production of [⁶⁸Ga]PSMA-11. According to the previously identified elution profile, Only 2.5 ml with high radioactivity was used for the reaction. After adjusting the pH of the reaction solution with HEPES buffer solution, the precursor was added and reacted with at 95 ℃ for 15 minutes. The reaction mixture was separated and purified using a C18 light cartridge. The product was eluted with 50% EtOH/saline solution and diluted with saline. It was completed by sterilizing filter. In the non-cassette type, the aforementioned process must be prepared directly. However, in the cassette method, synthesis was possible simply by installing a kit that was already completed. Results Both total [⁶⁸Ga]PSMA-11 production time were 25±3(non-cassette type) and 23±3 minutes(cassette type). The radiochemical yield of the non-cassette type(65.5±5.7%) was higher than that of the cassette type(61.6±4.8%) after sterilization filter. The non-cassette type took about 120 minutes of preparation time before synthesis due to washing of synthesizer and reagent preparation. However, since the cassette type does not require washing and reagent preparation, it took about 20 minutes to prepare before synthesis. Both type of synthesizer had a radiochemical high purity(>99%). Conclusion The non-cassette type production of [⁶⁸Ga]PSMA-11 showed higher radiochemical yield and lower cost than the cassette type. However, The cassette type has an advantage in terms of preparation time, convenience, and equipment maintenance.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.1
• /
• pp.10-17
• /
• 1991

An improved control method in turbine control system is proposed. By automatic follow-up design, power system frequency may be maintained within prespecified range. Base or half load control is possible by distributing power plant load allotment. Otherwise, diminutive frequency-load control is dine by governor-free operation in power plant. This paper proposes governor-free operation which is automatically followed by load-limitter setter. The condition which limits governor action may be somewhat improved within boiler condition by this idea. This design has been implemented at Samchunpo thermal power plant. The improved practical results are shown.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.39-44
• /
• 2007

The purpose of this research is to study security of $CO_2$ exhaust at night in indoor air quality purifying system using plants. For this purpose, two same units for experiment were built, and difference of $CO_2$ exhaust by existence and nonexistence of plantation were measured. To reduce error by entrance of people, automatic measurement system were developed and used. At first, baseline were measured to check standard value, and next, $CO_2$ exhaust by plantation were measured. As a result, in baseline experiment, values of all spaces were steady as 400~500 ppm. When plantation was set-up, value of $CO_2$ at night was measured high as 150 ppm, and maximum value was around 600 ppm. This result is a lot lower than maximum standard of $CO_2$, 1000 ppm.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.2
• /
• pp.10-20
• /
• 1997

This paper describes the design, the manufacture and the development of th eautomatic gain control unit which ajdusts the gain of IF processor in the high sensitive & multifunctional receiver unit (HMR) for pulse doppler radar system. Accodording to the effective distnce of target, radar cross section, and a lot of external environments (such as clutter), the receiving stage of RADAR system often deviates from dynamic range. To solve this kind o fproblem, continuous/pulse wave AGC are realized, make it possible to control the gain characteristics of receiver stably, and can increase dynamic range linearly by adjusting the gain slope of receiver which is limited by 1-dB gain compression point. In this study, AGC unit is designed to regulate the total gain of receiver by using te analog feedback theory. It also has rapid enough response to process pulse signal. This study presents the gain control method of IF, the real manufacture technique (the package-type components) and the measurement performance of AGC.