• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.26-37
• /
• 2001

In order to improve the several problems of the general backpropagation, we propose a method using a fuzzy logic system for automatic tuning of the activation function gain in the backpropagation. First, we researched that the changing of the gain of sigmoid function is equivalent to changing the learning rate, the weights, and the biases. The inputs of the fuzzy logic system were the sensitivity of error respect to the last layer and the mean sensitivity of error respect to the hidden layer, and the output was the gain of the sigmoid function. In order to verify the effectiveness of the proposed method, we performed simulations on the parity problem, function approximation, and pattern recognition. The results show that the proposed method has considerably improved the performance compared to the general backpropagation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.1-10
• /
• 2003

This paper is concerned with the fuzzy control scheme and PID controller for the vibration suppression control of a cantilever beam equipped with a laser sensor and an electromagnetic actuator. The PID controller is being widely used in industrial applications. However, it is difficult to determine the appropriate PID gains in nonlinear systems and systems with time variant characteristic and so on. In this paper, we design the fuzzy based PID controller of which output gains are adjusted automatically and the designed controller is applied to active vibration control of a cantilever beam using electromagnetic actuator with strong nonlinearity. The tuning PID parameters of proposed controller are determined by using Fuzzy algorithm. Effectiveness and performance of the designed controller are verified by both simulation and experiment results. Experimental results demonstrate that better control performance can be achieved in comparison with the PID cotroller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1040-1048
• /
• 2009

This paper proposes an auto flesh tone balance algorithm for the picture that is taken for people. General white balance algorithms bring neutral region into focus. But, other objects can be basis if its spectral reflectance is known. In this paper the basis for white balance is human face. For experiment, first, transfer characteristic of image sensor is analyzed and camera output RGB on average face chromaticity under standard illumination is calculated. Second, Output rate for the image is adjusted to make RGB rate for the face photo area taken under unknown illumination RGB rate that is already calculated. Input tri-stimulus XYZ can be calculated from camera output RGB by camera transfer matrix. And input tri-stimulus XYZ is transformed to standard color space (sRGB) using sRGB transfer matrix. For display, RGB data is encoded as eight-bit data after gamma correction. Algorithm is applied to average face color that is light skin color of Macbeth color chart and average color of various face colors that are actually measured.

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.342-349
• /
• 1998

A multipurpose TLD readout system for radiation dosimetry and thermoluminescence study is constructed and its characteristics are investigated. The thermoluminescent lights are measured by a PM tube and the current-to-frequency converter. TLDs are heated by platinum heater and the heating rate is linearly varied. Measurement of the glow curve and control of the whole system have been done by a personal computer equipped with an interface board. The automatic gain control can be done by the control software. The lower detection limit of the system is about $10\;{\mu}Gy$ and dose response is linear.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.183-186
• /
• 2000

In this paper we propose a new architecture of a programmable digital automatic gain controller(AGC) for analog interface in mixed mode systems. Compared with conventional analog AGCs which have difficulties in integration due to large capacitors, the proposed AGC is easily integrated. So the production cost can be reduced. In addition, The proposed AGC has a better performance in temperature, and power supply variations, and substrate noise than analog counterparts do. To prevent erroneous operations of the AGC due to noise, a mal-function preventer is newly proposed. In addition, to achieve an optimized AGC time constant, we propose a logic block which controls an up-down counting clock. This is directly related to the changing speed of the AGC gain. Implemented with a 0.25 $\mu\textrm{m}$ 1-poly, 5-metal CMOS parameters, the AGC operates from a single 2.5V power supply with the dynamic range of 36.ldB and occupies active area of 500$\mu\textrm{m}$${\times}$600$\mu\textrm{m}$

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.96-102
• /
• 2004

In this paper, optical noise is reduced by a differential detector, which is composed of a beam splitter and two photodiodes whose spectral responses are different each other. In this configuration, the automatic gain control circuit is not required for noise cancellation because the noise intensities at the two photodiodes are kept equal by a beam splitter. The signal to noise ratio in a differential detector with a beam splitter was improved to be 14 ㏈ higher than in a single photodiode with optical filtering.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.129-133
• /
• 2020

In this paper, a temperature compensation circuit is presented in order to mitigate gain variability due to temperature in the W-band low-noise amplifier (LNA). The proposed cascode temperature compensation bias circuit automatically controls gate bias voltages of the common-source LNA in order to suppress variations of small-signal gain. The designed circuit was realized in a 100-nm GaAs pHEMT process. The simulated voltage gain of W-band LNA including the proposed bias circuit is >20 dB with gain variability less than ±0.8 dB in the range of temperatures between -35 to 71℃. We expect that the proposed circuit contributes to millimeter-wave receivers for stable performances in radar applications.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.213-219
• /
• 2004

In this paper, a LNA(Low Noise Amplifier) has been developed, which is operating at L-band i.e., 1452∼1492 MHz for satellite DAB(Digital Audio Brcadcasting) receiver. The LNA is designed to improve input and output reflection coefficient and VSWR(Voltage Standing Wave Ratio) by balanced amplifier. The LNA consists of low noise amplification stage and gain amplification stage, which make a using of GaAs FET ATF-10136 and VNA-25 respectively, and is fabricated by hybrid method. To supply most suitable voltage and current, active bias circuit is designed Active biasing offers the advantage that variations in $V_P$ and $I_{DSS}$ will not necessitate a change in either the source or drain resistor value for a given bias condition. The active bias network automatically sets $V_{gs}$ for the desired drain voltage and drain current. The LNA is fabricated on FR-4 substrate with RF circuit and bias circuit, and integrated in aluminum housing. As a reults, the characteristics of the LNA implemented more than 32 dB in gain. 0.2 dB in gain flatness. lower than 0.95 dB in noise figure, 1.28 and 1.43 each input and output VSWR, and -13 dBm in $P_{1dB}$.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1996.12a
• /
• pp.76-102
• /
• 1996

북한은 전력부족난과 전기품질의 저하로 인하여 주요 생산기업에 지장을 주고 있으며, 노후 발전소의 성능저하도 함께 진행되고 있는 것으로 추정된다. 이에 대한 적절한 대책이 없는 한 그 상황은 더욱 악화될 전망이다. 한반도 에너지 개발기구(KEDO)가 추진하고 있는 경수로 원자력 발전기가 6～7년 후에 준공된다고 해도 이처럼 불안정한 전력계통에 병입되어 원활한 운전이 가능할런지 기대하기 곤란하다. 이러한 실정에서 \circled1 전력부족으로 주파수가 저하될 때 우선 순위가 낮은 부하를 제한하는 자동 부하제한 방식을 포함한 자동 주파수 제어 계통개선 \circled2 기존발전소 성능과 이용을 향상을 위한 재가동(Repowering) 등의 리 엔지니어링 \circled3 가스터빈 복합화력과 열병합발전(Co-generation) 등과 같이 건설기간이 짧고 비용이 적게 들며 송전 설비 건설도 불필요한 분산형 전원의 건설 \circled4 수력발전소와 조력발전소의 건설 \circled5 양수발전 등 전력에너지 저장설비의 개발 \circled6 송전전압격상과 배전방식개선 및 종합전력정보시스템 구축 \circled7 남ㆍ북한 전력계통 내지는 동북아시아 전력계통을 연계하는 평화망사업(Peace Network Project)등의 추진이 경수로 사업에 선행되어야 한다. 특히 러시아, 중국, 한국, 일본의 발전 에너지원 분포와 년간 부하곡선을 고려할 때 동북아시아 전력계통의 연계는 관련국 상호간에 에너지 환경과 경제적 측면에서 상당한 이득과 안정성을 강화해 줄 것이며, 기술발전과 평화공존에 크게 기여 할 것이다. 이를 위하여 관련국의 전력계통연계 전문가들이 참여하는 남\ulcorner북한전력 계통연계연합회(Co-Pia ; Co-rea Power Systems Interconnection Association)와 동북아지역전력 계통연합회(Near Pia=North-Eastern Asia Region Power Systems Interconnection Association)의 구성을 제안하는 바이다. 주요용어(Key Words): 자동주파수 제어(AFC), 리엔지니어링(Re-Engineering), 분산형 전원(Dispersed Generation System), 전력저장(Power Storage), 부하조절기(Load Conditioner), 수요관리(DSM) 연계(Interconnection), 인터시스템(Intersystem), 통합자원계획(IRP), 안전성 강화(Security Enhancement), 전력시장개방(Electricity Free Maket), 통일비용(Unification Expense, Unification Cost), 남ㆍ북한전력계통연계연합회(Co-Pia), 동북아지역전력 계통연계연합회(Nea,-Pia).

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.399-402
• /
• 2005

For efficient and accurate diagnosis of ultrasound images, the time gain compensation (TGC) and dynamic range (DR) control of the ultrasound echo signal are important. TGC is for compensating the attenuation of the ultrasound echo signal along the depth, and DR is used to control the image contrast. In this paper, we propose an algorithm for finding the optimized values of TGC and DR automatically. For TGC, the degree of compensation is determined along the depth based on the effective attenuation estimation of ultrasound signal. For DR optimization, we introduce a novel cost function on the basis of the characteristics of ultrasound image, which provides the minimum value at the optimal DR. Experiments have been performed by applying the proposed algorithm to a real US imaging system. The results show that the algorithm automatically can determine the values of TGC and DR in realtime so that the subjective quality of the corresponding US image may be good enough for diagnosis.